Mitsubishi Electric F940 Hardware Manual page 77

F940GOT-SWD-E/LWD-E
[ SERIAL PORT]
[ SERIAL PORT]
SPEED
DATA BIT
STOP BIT
PARITY
HANDSHAKING
PRINTAER
END
: 9600 bps
: 7 bit
: 1 bit
: Even
: XON/XOFF
: NOT USED
•Set the serial communication parameters for the printer
used to print out alarm messages and sampling data.
•Make sure to set "PRINTER" to "USE" when a printer is
connected.
When it is set to "USE", the two-port interface
function is not available.
•The areas enclosed with broken lines function as touch
keys.
Every time a touch key is pressed, the displayed con-
tents are changed over.
•When "LINK PORT (RS232C)" is selected on the PLC
TYPE screen, any printer cannot be connected.
Startup 3.
3-11