Mitsubishi Electric F940 Hardware Manual page 33

F940GOT-SWD-E/LWD-E
The power is supplied to the GOT from a PLC or an external power supply unit.
• Connection examples
1) When the power is supplied from an FX Series PLC (Refer to "Cautions on connection" in
the next page.)
Connect the power terminal in the GOT to the 24V DC service power supply in the PLC
basic unit or PLC extension unit.
Class 3
grounding
24V 0V S/S RUN
PLC
Installation, Wiring and General Specifications 2.
Class 3
grounding
X0 X1 X2
2A
- +
DC
24V
GOT
2-5