Mitsubishi Electric F940 Hardware Manual page 49

Graphic operation terminal f940
Table of Contents

Advertisement

F940GOT-SWD-E/LWD-E
Installation, Wiring and General Specifications 2.
• When the CPU in the FX/A Series PLC is directly connected, up to four GOT units can be
connected to one PLC (1-to-N connection).
As the connection type, select "CPU PORT (RS232C)" or "CPU PORT (RS422)" in "CON-
NECTION" on the PLC TYPE screen.
System configuration
FX/A Series
Side of GOT
1st unit
2nd unit
3rd unit
4th unit
RS-232C
RS-422C
RS-232C
RS-422 communication
communication
communication
communication
Maximum extension
15 m (49.2 ft)
30 m (98.4 ft)
15 m (49.2ft)
distance: 30 m (98.4 ft)
Note:
While the GOT display is used, peripheral units of the GOT and peripheral units used to cre-
ate sequence programs cannot be used except when the following system configuration is
realized using the FX
-422-BD in the FX
Series. Cables to connect such peripheral
2N
2N
units should be disconnected while the GOT display is used.
2-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F940got-lwd-eF940got-swd-e

Table of Contents