Mode Switches; Connections To The Controller; Other Connections And Peripherals - Mitsubishi Electric E1032 Installation Manual

Installation

2.2.1 Mode Switches

All mode switches must be in OFF position during operator terminal use.
The mode switches should not be touched unless by qualified personell.

2.2.2 Connections to the Controller

For information about the cables to be used when connecting the operator terminal
to the controller, please refer to the help file for the driver in question.

2.2.3 Other Connections and Peripherals

Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Mitsubishi Electric, MA00816 9