GE NetworX NX-4 Installation And Startup page 33

LOC PG
AUXILIARY 2
64 22
65 22 KEYPAD PANIC
66 22 KEYPAD MULTIPLE CODE ENTRY TAMPER
67 22 BOX TAMPER / BOX TAMPER RESTORE
68 23 AC FAIL / AC RESTORE
69 23 LOW BATTERY / LOW BATTERY RESTORE
70 23 POWER SHORT / POWER SHORT RESTORE
71 23 BELL TAMPER / BELL TAMPER RESTORE
74 23 EXPANDER TROUBLE / EXPANDER TROUBLE RESTORE
75 23 FAILURE TO COMMUNICATE
76 23 LOG FULL COMMUNICATOR CODE
77 23 OPENING CODE COMMUNICATOR CODE
78 23 CLOSING COMMUNICATOR CODE
79 23 AUTOTEST COMMUNICATOR CODE
80 23 RECENT CLOSING AND EXIT ERROR
81 24 START PROGRAMMING / END PROGRAMMING
82 24 END DOWNLOAD
83 24 CANCEL COMMUNICATOR CODE
These locations are considered advanced programming and should only be changed with a thorough understanding of the
operation of each bit. These locations are used to design or customize zones when the Standard Zones Types in Table 2.1
on page 25 do not fit your needs.
110 24 GROUP 1 ALARM EVENT CODE
111 24 GROUP 1 CHARACTERISTIC SELECT
Segment #1 (Circle numbers to program)
1 Fire (enable for fire zone)
2 24 Hour (enable for non-fire 24 hour
zone)
3 Reserved
4 Follower (enable for burg zones that are
instant during non-entry times)
Segment #2 (Circle numbers to program)
1 Keypad audible on alarm.
2 Yelping siren on alarm.
3 Temporal siren on alarm.
4 Chime.
Segment #3 (Circle numbers to program)
1 RESERVED.
2 Double End of Line Tamper zone.
3 Trouble zone (Day zone).
Cross Zone.
4
DESCRIPTION
CUSTOMIZING ZONE TYPES (GROUPS)
DEFAULT
0-0-0-0
0-0-0-0
0-0-0-0
0-0-0-0
0-0-0-0
0-0-0-0
0-0-0-0
0-0-0-0
5 Delay 1 zone (enable to follow Timer 1 Entry/Exit
times)
6 Delay 2 zone (enable to follow Timer 1 Entry/Exit
times)
7 Interior (Enable for auto bypass or stay arming)
8 Local Only (enable if zone is not to be reported)
5 Bypassable.
6 Group Shunt.
7 Force Armable.
8 Entry Guard.
5 Dialer Delay zone.
6 Swinger zone.
7 Restore reporting.
8 Listen-In.
NX-4 Control
DATA
0-0 _ _
0-2 _ _
0-0 _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
_ _ _ _
0-0 _ _
0-0 _ _
11 _
12 _
0-0 _ _
0-0 _ _
_ _ _ _
_ _ _ _
0 _
8 _
Page 31