Front Wheel - Sym DD 50 Service Manual

13. STEERING/FRONT WHEEL/SUSPENSION
Place master cylinder onto handle and align its
connection surface with bolt hole on the handle
(disc brake).
Install the mounting seat.
Tighten the upper part bolt, and then tighten
lower bolt.
Install all components in reverse order of removal
procedures.
Conduct following adjustment:
Oil pump control cable.
Throttle operation.
Brake lever free play

Front Wheel

Removal
Remove speedometer cable from speedometer
gear box.
Remove front brake cable. (Drum type)
Remove front wheel axle nut, and then pull out
the axle and remove the wheel.
13-4
This chapter Contents
Master cylinder
DISK TYPE
Speedometer cable
DURM TYPE
Brake cable
Axle nut
Speedometer cable
Axle nut
Bolt