Sym DD 50 Service Manual page 137

This chapter Contents
14. REAR WHEEL/SUSPENSION
Shaft nut
Installation
Install the rear wheel and tighten the nut.
Tighten torque: 11.0kgf-m
Connection nuts
Install exhaust pipe & muffler.
Tighten torque (bolt): 3.3kgf-m
Tighten torque (nut): 1.2kgf-m
Bolts
Rear Shock Absorber Upper mounting bolt
Removal
Remove body cover.
Remove air cleaner.
Remove rear shock absorber upper & lower
bolts.
Remove rear shock absorber.
Lower mounting bolt
Installation
Install the rear shock absorber.
Tighten the upper & lower mounting bolts to
specified torque.
Torque value:
Upper mounting bolt: 4.0kgf-m
Lower mounting bolt: 2.7kgf-m
Press down the tail of the scooter for several
times to check shock absorber operation.
Installation all components in reverse order of
removal procedures.
Install air cleaner.
14-4