Table of Contents
Advertisement
CENTRALLY CONTROLLED
ON OFF
CHECK
CLOCK
B
˚C
STAND BY
DEFROST
CLOCK
2
3
TEMP.
TIMER SET
REMOTE CONTROLLER
PAR-JH240KA
6
A
CENTRALLY CONTROLLED
CHECK
CLOCK
˚C
STAND BY
DEFROST
CLOCK
1
TEMP.
TIMER SET
REMOTE CONTROLLER
PAR-JH240KA
10
ON/OFF –
1Hr.
FILTER
˚C
CHECK MODE
TEST RUN
NOT AVAILABLE
ON OFF
FILTER
CHECK
TEST RUN
4
5
ON/OFF –
1Hr.
ON OFF
FILTER
˚C
CHECK MODE
TEST RUN
NOT AVAILABLE
ON OFF
FILTER
CHECK
TEST RUN
4. Operation
E
4.6. Automatic (cooling / heating)
The AUTO mode starts with cooling or heating depending on the current
room temperature, higher or lower, than a selected temperature value
accordingly.
1 If the unit is off, press the ON/OFF button to turn it on.
A The ON indicator should light up.
2 Press the operation mode
automatic mode
A
B
should be displayed.
3 If necessary, press
1
See page 10 for details.
4 If necessary, press
See page 13 for details.
5 If necessary, press
air is blowing.
See page 14 for details.
6 If necessary, press
See page 11 for details.
4.7. Selecting a temperature
s s s s s To decrease the room temperature:
1 Press
button to set the desired temperature.
TEMP.
A The selected temperature is displayed.
•
Each time you press the button, the temperature value decreases by
1°C.
s s s s s To increase the room temperature:
1 Press
button to set the desired temperature.
TEMP.
A The selected temperature is displayed.
•
Each time you press the button, the temperature value increases by
1°C.
•
Available temperature ranges are as follows:
Cooling & Drying:
Heating:
Automatic:
Circulation:
button to select the
.
button to set the desired temperature.
TEMP.
button to select a desired rate.
to specify the vertical angle at which the
button to set the timer.
TEMP.
19 - 30°C
17 - 28°C
19 - 28°C
— (Not available)
Hide quick links:
Advertisement
Table of Contents
