Table of Contents
Advertisement
A
B
CENTRALLY CONTROLLED
ON OFF
CHECK
CLOCK
˚C
STAND BY
DEFROST
CLOCK
1
TEMP.
TIMER SET
REMOTE CONTROLLER
PAR-JH240KA
A
CENTRALLY CONTROLLED
ON OFF
CHECK
CLOCK
˚C
STAND BY
DEFROST
CLOCK
TEMP.
TIMER SET
REMOTE CONTROLLER
PAR-JH240KA
3
12
C
ON/OFF –
1Hr.
FILTER
˚C
CHECK MODE
TEST RUN
NOT AVAILABLE
ON OFF
FILTER
CHECK
TEST RUN
2
ON/OFF –
1Hr.
FILTER
˚C
CHECK MODE
TEST RUN
NOT AVAILABLE
ON OFF
FILTER
CHECK
TEST RUN
1
4. Operation
E
4.8. Using the timer
2) Set the time to start the unit as follows
CLOCK
ON
OFF
button to display B
1 Press
2 Press
button to set the time that you want the unit to start.
TIMER SET
The start time is displayed at A.
3) Set the time to stop the unit as follows
CLOCK
ON
OFF
button to display C
1 Press
2 Press
button to set the time that you want the unit to stop.
TIMER SET
The stop time is displayed at A.
4) Changing the set times
1 Press
CLOCK
ON
OFF
button to display the time (CURRENT, START,
STOP) you want to change.
2 Press
button to set the desired time.
TIMER SET
•
When change is made to either one of a pair, e.g., AUTO START or
AUTO STOP, set the time you need not to change to
display is available following 23:50.
4.8. Using the timer
5) AUTO START and AUTO STOP operation
CLOCK
ON
OFF
1 Press
button to make the following checks.
Check that the current time is correct.
Check that the automatic start time is correct.
Check that the automatic shutdown time is correct.
•
For selection or changing of time, see the previous page (page 11) .
•
The next operation time is displayed after approximately 10 seconds.
button to display A
3 Press
•
Each time you press
button, available options change as follows
with relative displays on the remote controller.
Remote controller display —
Available setting
—
CLOCK
ON
OFF
ON
.
OFF
.
CLOCK
ON
OFF
on the remote controller.
↔ A
Timer-interlocked operation
. This
Hide quick links:
Advertisement
Table of Contents
