11
SERVICE WORK ON THE CHASSIS
11.18
Correcting fluid level of hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Check the fluid level.
The fluid level must be between the MIN and MAX markings.
»
If the coolant level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch. (
100752-01
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screw cap with membrane.
–
Correct the fuel level.
Guideline
The fluid level must be between the MIN and MAX markings.
Hydraulic fluid (15) (
–
Refit the screw cap with the membrane.
100753-01
p. 259)
169
p. 169)