KTM 1190 RC8 R Owner's Manual page 230

18 CLEANING, CARE
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
–
Remove the plug from the exhaust system.
Warning
Danger of accidents Reduced braking efficiency due to a wet or dirty brake sys-
tem.
–
Clean or dry a dirty or wet brake system by riding and braking gently.
–
After cleaning, ride a short distance until the engine reaches operating temperature.
Info
The heat produced causes water at inaccessible locations in the engine and
brake system to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 161)
–
Treat bare metal (except for brake discs and the exhaust system) with an anticorrosive.
Preserving materials for paints, metal and rubber (
–
Treat all painted parts with a mild paint care product.
Special cleaner for glossy and matte paint finishes, metal and plastic surfaces
( p. 262)
–
Treat all plastic parts and powder-coated parts with a mild cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal and plastic surfaces
( p. 262)
–
Lubricate the ignition/steering lock, tank lock, and seat lock.
Universal oil spray ( p. 262)
p. 262)
228