KTM 1190 RC8 R Owner's Manual page 91

6 CONTROLS
–
Press the button
–
Press the button
–
Press the MODE button briefly.
–
Press the button
–
Press the MODE button briefly.
LAP BLANK T. appears on the info display.
Info
At delivery, LAP BLANK T. is set to 10 seconds.
401168-01
Tip
With LAP BLANK TIME function, you can prevent the lap from being timed too
short. This may happen if you accidentally press the LAP button twice in a row.
–
Set the blank time of the LAP button with the button
Info
LAP BLANK T. can be set between 1 and 200.
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
–
Press the button
display.
–
Press the MODE button briefly.
–
Press the button
info display.
–
Press the MODE button briefly.
and the button for 3 - 5 seconds.
shows SETTINGS in the info display.
twice until the symbol
once until the symbol shows LAP BLANK TIME in the info display.
briefly and repeatedly until the symbol
briefly and repeatedly until the symbol
or the button .
shows BACK... in the info
shows EXIT SETUP in the
89