Intel AP450GX MP Configuration Manual page 5

Please refer to the qualified memory list for a selection of memory
SIMMs/DIMMs at:
http://support.intel.com/support/motherboards/server/ap450gx
• Baseboard
Y
Two slots for Pentium Pro processor modules
Y
Slot connector to support DRAM memory module
Y
6 PCI slots, 4 EISA slots
Y
Integrated graphics controller – Cirrus Logic CL-GD5424 SVGA with 1MB
VRAM
Y
Integrated SCSI controller – dual channel SCSI-2 adapter, Adaptec AIC-7880
chipset
• Processor Module with Processors
Y
1MB processor module with two 200MHz / 1MB cache Pentium Pro
processors
• Memory Module
Y
2GB SIMM memory module (memory not included)
•
Terminator Card
Required when only one dual Pentium Pro processor module is used in the
system. The empty processor module slot must be filled with this card.
• Base System Chassis
Y
Two 420W power supplies with cord (supports expansion to 3 power
supplies)
Y
One floppy drive bay with a 3.5-inch diskette drive
Y
Four 5.25-inch half-height peripheral bays for removable media devices
Y
IDE CD-ROM drive in the top peripheral bay
Y
Two bays mounted to a hot swap SCSI backplanes (each bay supports up to
six 3.5-inch standard 80-pin SCA-2 hard drives)
Y
Three system fans to cool the baseboard and adapter card area
Y
Two power supply fans to cool the hard drives
• Country Kit
Y
The Country Kit contains system documentation and software drivers.
5
AP450GX Configuration Guide