Displaying Agent Log-In Information - Mitel ACD 2000 Manual

Displaying Agent Log-In Information

It is possible to display and verify Log-In information when you are logged in to a
set. The information displayed is the Agent I.D. number logged in to that set. This
is accomplished by the following tasks:
1. Press the SuperKey Function Key,
2. Press # until PERSONAL KEYS appears on the display.
3. Press * and the Agent Identification (I.D.) number currently logged in
will be displayed for 3 seconds.
4. The prompt SELECT A KEY appears. You may select another Line
Select Key for similar information if the set has more than one line
appearance.
If you press your Prime Line Key, your display shows your Agent I.D.
number and your name (if programmed).
5. To exit, press the SuperKey Function Key.
15