Call Forward (Enhanced) - Mitel 4125 SX-200 User Manual

Call Forward (Enhanced)

Call Forward lets you redirect incoming calls to an alternate number.
"External Calls?" redirects your incoming external calls only; "Internal Calls?"
redirects your incoming internal calls only. If you want to redirect both
external and internal calls, you must program each separately.
"Always Forward?" redirects all incoming calls regardless of the state of your
telephone. "When No Answer?" redirects calls after several rings if you don't
answer. "When Set's Busy?" redirects calls when your telephone is busy.
"Busy/No Answer?" redirects calls when your telephone is busy or when you
don't answer.
Note: For information about the I_m Here? softkey, see Call Forward -
Remote.
To program Call Forward:
1. Press SUPERKEY.
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Do one of the following:
To program external forwarding, press Yes softkey.
To program internal forwarding, press No softkey.
An asterisk next to External Calls? or Internal Calls? indicates that al
least one type of call forwarding is turned on.
5. Press the Program or Change softkey key to program Call Forward
Always or the Next softkey to program another type of call forward.
6. Dial the destination number.
7. Press the Save softkey.
-15-