Chapter 5 Web Management Function; Network Settings - 3onedata NP301 User Manual

Before configuration NP301, please make sure your PC have installed necessary software and configure
the network reasonable.
The lowest requirements of user PC is as follows:
 Installation operation system（as Windows XP/2000, Windows 7 etc）
 Installation Ethernet card
 Installation Web broswer（Up to IE6.0）
 Installation and startup TCP/IP protocol

Network settings

5.1
NP301 default IP address: 192.168.1.254, subnet mask: 255.255.255.0. When access NP301 through WEB
browser. The IP address of the NP301 and PC must be in the same Local Area network. You can modify
PC's or NP301's IP address to make sure that they are in the same Local Area Network. Operating process
can follow method 1 or method 2 as below:
Method 1: Modify PC's IP address.
 Click Start->Control panel->network connections->Local area Connection->Properties->Internet protocl
（TCP/IP）Setting PC's IP address: 192.168.1.X（X is expect 254, from 2 to 253）.
 Click "OK", IP address modified successful.
The Windows system operation interface is as figure 5-1:
Method 2: Modify NP301's address through our VSP manager software
 Install the VSP manager software on the PC.
 Enter into VSP Manager management interface, click "Search" to search the NP301.

Chapter 5 Web management function

（Figure 5-1）
Shenzhen
7
3onedata Technology Co., Ltd