3onedata NP301 User Manual page 20

"OK" button.
Choose connecting serial port. Choose connecting serial port under"Connect using"（pay attention to the
chosen serial port is consistent with the port connected with the configuration cable） ，Click "OK"。As figure
5.11。
Set serial port parameters. As shown in Figure 5.12,
port is 115200bit/s，"Data bits" is 8，"parity" is None，"Stop Bits" is 1，"Flow Control" is None. Click "OK"
button to enter to "Hyper Terminal" Window.
（ Figure 5.10）
（ Figure 5.11）
set the "Bits per second" in the"Properties" of serial
17
Shenzhen
3onedata Technology Co., Ltd