Handoff - Personal Ring Groups - Mitel COMMUNICATION DIRECTOR 5320 User Manual

 Dial the Group Presence - Leave Group feature access code followed by the group
directory number.
The LED associated with the key is steady lit when the member is present and off when
absent.
To change another group member's presence status:
1. Lift the handset.
2. Dial the Group Presence - Join Group Third Party or Group Presence - Leave Group
Third Party .
3. Dial the directory number of the group member.
4. Dial the group directory number.
To change the presence status of another Personal Ring Group member using a
feature key:
 Press the Personal Ring Group Presence feature key.
The LED associated with the key is steady lit when the member is present and off when
absent.

Handoff - Personal Ring Groups

Personal Ring Groups (PRGs) associate two or more of your devices, such as your office
phone and cell phone, with a single user Directory Number (DN). PRGs are set up by the
system administrator. Group member devices ring simultaneously when called.
You can use the group Handoff feature to "Push" or "Pull" calls between group member
devices. A Push passes the call to the group, where it can be answered by any other present
group device. A Pull takes an in-progress call away from another member.
To use Handoff to Push an in-progress call to the PRG:
 Press the Handoff key.
To Pull an in-progress call from another member of the PRG:
 Lift the handset (optional if the device supports hands free operation).
Press the Handoff key.

- 39 -
5320 IP Phone – User Guide