Speed Call; Tag Call - Mitel COMMUNICATION DIRECTOR 5320 User Manual

Speed Call

Speed Call is an application that allows you to dial a specific number with one key press. You
must program Speed Call on a Programmable key. For more information on programming
this key, see Program Feature Keys Using the Settings
To make a Speed Call:
 Press the key that you have programmed as your Speed Call key.


Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using
the tag, your system administrator or Telephone Company can identify the source of the call
and provide this information to appropriate personnel or authorities.
CAUTION: Tagging a non-malicious call may result in fines or other penalties.
To tag a malicious call:
1. Press the programmed Tag Call key while the call is in progress. For information on how
to program keys, see to Programming Features On Your Keys
-OR-
Press
2. Dial the appropriate feature access code.
If the call was successfully tagged, Thank You is shown on the display; otherwise, Not
Allowed is displayed.
Note: Tag Call can be used on active two-party calls only. Calls on hold and conference
calls cannot be tagged.
(TRANS/CONF).
Application.
- 49 -
5320 IP Phone – User Guide