Call Forward - Remote - Mitel Navigator 3300 ICP User Manual

Navigator User Guide
To turn Call Forward on and off (once it has been programmed):
1. Press (SUPERKEY).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Next softkey until the type of Call Forward appears.
5. Press the Review softkey.
6. Press the Change softkey.
7. Do one of the following:
•
To turn Call Forward on, press the TurnOn softkey.
•
To turn Call Forward off, press the TurnOff softkey.
Call Forward – Remote
To forward calls from a remote phone to your current location:
1. Press (SUPERKEY).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Next softkey until "I Am Here" appears.
5. Press the Yes softkey.
6. Dial the extension of the remote station.
7. If you make an error while dialing, use the <−−− softkey to backspace and correct the
number.
8. Press the Save softkey.
To cancel Call Forward - Remote from the phone that set the remote forwarding:
1. Lift the handset.
2. Dial **77.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward - Remote from the phone that was forwarded:
1. Press (SUPERKEY).
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Press the Review softkey.
5. Press the Change softkey.
28