Removing A Child Restraint Installed With A Seat Belt; Child Restraint Systems With A Top Tether Strap; Laws And Regulations Pertaining To Anchorages - Toyota RAV 4 2015 Service Manual

Removing a child restraint installed with a seat belt

Push the buckle release button
and fully retract the seat belt.

Child restraint systems with a top tether strap

Secure the child restraint sys-
1
tem using the seat belt or
LATCH anchors.
Latch the hook onto the anchor
2
bracket and tighten the top
tether strap.
Make sure the top tether strap is
securely latched.
When installing the child restraint
system with the head restraint
being raised, be sure to have the
top tether strap pass underneath
the head restraint.

Laws and regulations pertaining to anchorages

■
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to the SAE J1819.
RAV4_OM_OM42A78U_(U)
1-1. For safe use
I n f o r ma t i o n P r o v i d e d b y :
71
1
Top tether strap