Release Tones
■
A continuous tone signal is a character string that consists of numbers and
●
the characters p or w. (e.g.056133w0123p#1)
When the "p" pause tone is used, the tone data up until the next pause tone
●
will be automatically sent after 2 seconds have elapsed. When the "w"
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.
●
Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired. A
phone number with continuous tone signals can be registered in the contact
list.
Tone data after a "w" pause tone can be operated on voice command during
●
a call.
RAV4_OM_OM42A78U_(U)
5-3. Using the audio system (Entune Audio)
I n f o r ma t i o n P r o v i d e d b y :
449
5