224
4-3. Operating the lights and wipers
The Automatic High Beam can be operated when
■
Vehicles without a smart key system
The engine switch is in the "ON" position.
Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
Camera sensor detection information
■
High beam may not be automatically turned off in the following situations:
●
• When oncoming vehicles suddenly appear from a curve
• When the vehicle is cut in front of by another
• When oncoming or preceding vehicles are hidden from sight due to
repeated curves, road dividers or roadside trees
• When oncoming vehicles appear from the faraway lane on wide road
• When oncoming or preceding vehicles have no lights
High beam may be turned off if an oncoming vehicle that is using fog lights
●
without using the headlights is detected.
House lights, street lights, red traffic signals, and illuminated billboards or
●
signs may cause the high beam to turn off.
The following factors may affect the amount of time taken to turn high beam
●
on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• The movement and direction of oncoming and preceding vehicles
• When a oncoming or preceding vehicle only has operational lights on one
side
• When a oncoming or preceding vehicle is a two-wheeled vehicle
• The condition of the road (gradient, curve, condition of the road surface
etc.)
• The number of passengers and amount of luggage
●
High beam may be turned on or off when unexpected by the driver.
RAV4_OM_OM42A78U_(U)
I n f o r ma t i o n P r o v i d e d b y :