Auto Connection; Manual Connection; Connecting A Bluetooth Audio Player - Toyota RAV 4 2015 Service Manual

434
5-3. Using the audio system (Entune Audio)

Auto connection

To turn auto connection mode on, set "Bluetooth* Power" to on.
(P. 438)
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
connection can be established.
When the engine switch is turned to the "ACC" or "ON" position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby cel-
lular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.

Manual connection

When auto connection has failed or "Bluetooth* Power" is turned off,
you must connect the Bluetooth
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in "Connecting a Bluetooth
(P. 433)
Connecting a Bluetooth
Registering an additional device

Select "Select Device" on the Bluetooth
1
For more information: P. 431
2
Selecting a registered device

Select "Select Device" on the Bluetooth
1
For more information: P. 433
2
RAV4_OM_OM42A78U_(U)
®
phone in a place where a
®
device manually.
®
device" from
®
audio player
®
audio control screen.
®
audio control screen.
I n f o r ma t i o n P r o v i d e d b y :
.
1