Page 1 Driving driving (Main topics: Starting hybrid system, refueling) Operating the Entune Audio Entune audio (Main topics: Audio/visual, phone, Toyota Entune) Usage of the interior features Interior features (Main topics: Air conditioner, storage features) Caring for your vehicle and maintenance Maintenance...
Page 2: Table Of Contents
TABLE OF CONTENTS For your information....Gauges and meters (with 7- inch display) ....96 Reading this manual ....13 How to search......14 Multi-information display Pictorial index ......16 Energy monitor/consumption screen......For safety and security Before driving 1-1. For safe use Before driving....28 3-1.
Page 3: Table Of Contents
................ EV drive mode ....Rear view monitor system Hybrid transmission .......... Turn signal lever.... Toyota parking assist monitor Parking brake............ Brake Hold ....Panoramic view monitor 4-3. Operating the lights and Driving mode select switch wipers ........
Page 4 TABLE OF CONTENTS Status icon ....AUX ....... “Setup” screen ....5-8. Audio/visual remote con- trols 5-2. Basic information before operation Steering switches ..Initial screen ....5-9. Audio settings Touch screen....Setup ......Home screen....5-10.Tips for operating the audio/visual system Entering letters and num- bers/list screen operation...
Page 5 Type D: Function achieved by ........using DCM and a smart- General maintenance ..phone ......Emission inspection and 5-17.Toyota Entune operation maintenance (I/M) programs Toyota Entune App Suite ........Connect....... 7-3. Do-it-yourself maintenance 5-18.Entune settings Do-it-yourself service precau- Toyota Entune App Suite tions......
Page 6 TABLE OF CONTENTS When trouble arises Vehicle specifications 8-1. Essential information 9-1. Specifications Emergency flashers ..Maintenance data (fuel, oil level, etc.) ....If your vehicle has to be stopped in an emergency Fuel information..........Tire information ..... If the vehicle is trapped in ris- 9-2.
Page 7 TABLE OF CONTENTS...
Page 8: For Your Information
However, because of they may have on, your Toyota the Toyota policy of continual vehicle. product improvement, we This vehicle should not be modi-...
Page 9 • For use by Toyota in a lawsuit The recorded data varies • For research purposes where the according to the vehicle grade...
Page 10  How far (if at all) the driver (U.S.mainland only) was depressing the accelera- tor and/or brake pedal; and, If your Toyota has Safety Con-  How fast the vehicle was trav- nect and if you have subscribed eling. to those services, please refer to...
Page 11: Driving Driving
• In response to an official request teries. by the police, a court of law or a government agency WARNING • For use by Toyota in a lawsuit ■ General precautions while However, if necessary, Toyota may: driving • Use the data for research on...
Page 12 WARNING ■ General precaution regarding children’s safety Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure them- selves by playing with the side windows, the moon roof or the...
Page 13: Reading This Manual
Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual switches and other devices. Symbols in this manual Indicates the outcome of an operation (e.g. a Symbols Meanings lid opens). WARNING: Explains something that, if not obeyed,...
Page 14: How To Search
Searching by title ■ How to search  Table of contents: P.2 Searching by name ■  Alphabetical index: P.721 Searching by installation ■ position  Pictorial index: P.16 Searching by symptom or ■ sound  What to do if... (Troubleshoot- ing): P.718...
Page 16: Pictorial Index
Pictorial index Pictorial index ■Exterior The shape of the headlights may differ depending on the grade, etc. Side doors ................P.127 Locking/unlocking ..............P.127 Opening/closing the side windows ........P.176 Locking/unlocking by using the mechanical key ..P.128, 657 Warning messages .............. P.642 Back door ................
Page 17 Pictorial index To prevent freezing (windshield wiper de-icer) ....P.519 Precautions against car wash (Rain-sensing windshield wipers) ........P.555 Replacing the wiper insert ........... P.599 Fuel filler door ..............P.241 Refueling method ..............P.241 Fuel type/fuel tank capacity ..........P.671 Tires..................
Page 18 Pictorial index License plate lights............P.229 Side turn signal lights ............P.222 : If equipped...
Page 19 Pictorial index ■Instrument panel Power switch .............. P.210, 212 Starting the hybrid system/changing the modes ............ P.210, 211, 212, 215 Emergency stop of the hybrid system ........P.623 When the hybrid system will not start ........P.654 Warning messages .............. P.642 Shift lever................
Page 20 Pictorial index Display ................. P.101 Energy monitor..............P.111 When the warning messages are displayed ......P.642 Turn signal lever..............P.222 Headlight switch ..............P.229 Headlights/parking lights/tail lights/ license plate lights/daytime running lights......P.229 Fog lights ................P.235 Windshield wiper and washer switch....... P.236 Rear window wiper and washer switch ......
Page 21 Pictorial index ■Switches Driving position memory switches ......... P.157 Window lock switch ............P.178 Power window switches ............ P.176 Door lock switches ............P.131 Outside rear view mirror switches ........P.174 “ODO TRIP” switch ............P.94, 99 Instrument panel light control dial ......P.94, 100 Automatic High Beam switch ...........
Page 22 Pictorial index Meter control switches ............P.102 Vehicle-to-vehicle distance switch ........P.276 Cruise control switches Dynamic radar cruise control with full-speed range ..... P.271 Audio remote control switches ........P.446 LTA (Lane Tracing Assist) switch ........P.258 Phone switch ..............P.471 Talk switch .................
Page 23 Pictorial index VSC OFF switch ..............P.370 Front seat heater switches ..........P.522 Front seat ventilator switches ......... P.523 Parking brake switch ............P.223 Applying/releasing..............P.223 Precautions against winter season ........P.379 Warning buzzer/message ..........P.637, 642 Brake hold switch .............. P.226 Trail Mode switch ...............
Page 24 Pictorial index ■Interior SRS airbags ................P.35 Floor mats................P.28 Front seats................P.154 Rear seats ................P.155 Head restraints ..............P.160 Seat belts ................P.31 Console box ............... P.528 Inside lock buttons ............P.131 Cup holders ................ P.528 Assist grips ................ P.544 Rear seat heater switches ..........
Page 25 Pictorial index ■Ceiling “SOS” button ..............P.67 Auxiliary box ..............P.529 Moon roof switches ............P.179 Interior lights ..............P.524 Personal lights ..............P.525 Electronic sunshade switch ........... P.182 Vanity mirrors ..............P.535 Sun visors................P.535 Inside rear view mirror ............
Page 26 Pictorial index...
Page 27: For Safety And Security
For safety and security 1-1. For safe use Before driving....28 For safe driving ....29 Seat belts .......31 SRS airbags ....35 Front passenger occupant classification system ..45 Exhaust gas precautions 1-2. Child safety Riding with children ..51 Child restraint systems... 1-3. Emergency assistance Safety Connect ....67 1-4.
Page 28: Before Driving
Do not use floor mats designed Insert the retaining hooks for other models or different (clips) into the floor mat eye- model year vehicles, even if lets. they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 29: For Safe Driving
1-1. For safe use For safe driving WARNING ■ Before driving For safe driving, adjust the Check that the floor mat is ● securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
Page 30 1-1. For safe use properly wear the vehicle’s seat WARNING belt. (P.52) Observe the following precau- tions. Failure to do so may result in Adjusting the mirrors death or serious injury. Do not adjust the position of the Make sure that you can see ●...
Page 31: Seat Belts
Do not use a seat belt for more than one person at once, including chil- dren. ● Toyota recommends that chil- dren be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 32 Have tions regarding seat belt usage. any necessary repairs carried (P.31) out by your Toyota dealer. Inap- ■ Seat belt extender propriate handling may lead to incorrect operation. If your seat belts cannot be fastened...
Page 33 1-1. For safe use a click sound is heard. WARNING To release the seat belt, ● Do not wear the seat belt extender if you can fasten the press the release button seat belt without the extender. ■ Emergency locking retractor ●...
Page 34 In that case, the seat frontal or side collision or a vehi- belt cannot be used again and cle rollover. must be replaced at your Toyota dealer. The pretensioners do not activate in the event of a minor frontal impact, a minor side impact or a rear impact.
Page 35: Srs Airbags
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to cer- tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ■...
Page 36 1-1. For safe use SRS curtain shield airbags • Can help protect primarily the head of occupants in the outer seats • Can help prevent the occupants from being thrown from the vehicle in the event of vehicle rollover SRS airbag system components ■...
Page 37 1-1. For safe use Driver airbag Front passenger occupant classification system (ECU and sen- sors) Knee airbag SRS warning light Airbag sensor assembly Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc.
Page 38 1-1. For safe use However, this threshold velocity will severe frontal collision. be considerably higher in the follow- ■ Conditions under which the ing situations: SRS airbags may deploy (inflate), other than a collision • If the vehicle strikes an object, such as a parked vehicle or sign The SRS front airbags and SRS cur- pole, which can move or deform...
Page 39 ● Collision from the side at an angle In the following cases, the vehicle will require inspection and/or repair. Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is dam-...
Page 40 1-1. For safe use vehicle was involved in an acci- ● The portion of the front pillars, rear dent that was not severe enough pillars or roof side rail garnishes to cause the SRS side and curtain (padding) containing the SRS cur- shield airbags to inflate.
Page 41 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
Page 42 1-1. For safe use ● Do not allow anyone to kneel on WARNING the passenger seat toward the ● Do not sit on the edge of the door or put their head or hands seat or lean against the dash- outside the vehicle.
Page 43 If the areas where the SRS air- bags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not hang coat hangers or ●...
Page 44 1-1. For safe use WARNING ● Repairs, modifications, removal or replacement of the steering wheel, instrument panel, dash- board, seats or seat upholstery, front, side and rear pillars, roof side rails, front door panels, front door trims or front door speakers ●...
Page 45: Front Passenger Occupant Classification System
1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and seat cushion airbag in the front passen- ger side.
Page 46 1-1. For safe use ● Do not put objects under the WARNING front passenger seat. ■ Front passenger occupant classification system precau- ● Do not recline the front passen- tions ger seatback so far that it touches a rear seat. This may Observe the following precautions cause the “AIR BAG OFF”...
Page 47 Otherwise, the SRS warning light may come on to indicate a malfunction of the front passenger occupant clas- sification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not con- tact the front seatbacks.
Page 48 1-1. For safe use Condition and operation in the front passenger occupant classification system Adult ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG ON” indicator lights Indicator/warn- SRS warning light ing light Driver’s and front passenger’s seat or flashing belt reminder light Front passenger airbag Activated...
Page 49 1-1. For safe use Unoccupied ■ “AIR BAG ON” and “AIR BAG OFF” “AIR BAG OFF” indicator lights Indicator/warn- SRS warning light ing light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Front passenger seat cushion airbag There is a malfunction in the system ■...
Page 50: Exhaust Gas Precautions
Failure to do so may cause repaired by your Toyota dealer. exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
Page 51: Child Safety
1-2. Child safety Riding with children 1-2.Child safety WARNING ■ When children are in the vehi- Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
Page 52: Child Restraint Systems
1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
Page 53 1-2. Child safety WARNING ● Toyota strongly urges the use of a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 54 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.56 Child restraint LATCH P.61 anchors attachment...
Page 55 1-2. Child safety When using a child WARNING restraint system ■ When using a child restraint system When installing a child ■ Observe the following precau- restraint system to a front tions. Failure to do so may result in passenger seat death or serious injury.
Page 56 1-2. Child safety ● When a booster seat is WARNING installed, always ensure that the ● A forward-facing child restraint shoulder belt is positioned system may be installed on the across the center of the child’s front passenger seat only when shoulder.
Page 57 1-2. Child safety manual enclosed with the child in lock mode. In lock mode, restraint system. the belt cannot be extended. Rear-facing  Infant ■ seat/convertible seat Adjust the rear seat. If there is a gap between the child restraint system and the seatback, adjust the seatback angle until good contact is achieved.
Page 58 1-2. Child safety buckle. Make sure that the When using the rear seat: If there is a gap between the child restraint belt is not twisted. system and the seatback, adjust the seatback angle until good con- tact is achieved. If the head restraint interferes with the child restraint system installation and the head...
Page 59 1-2. Child safety removed, remove the head check that it cannot be extended. restraint. (P.161) If the child restraint has a top tether strap, follow the child Place the child restraint sys- restraint manufacturer’s tem on the seat facing the operation manual regarding front of the vehicle.
Page 60 1-2. Child safety buckle. Make sure that the WARNING belt is not twisted. ■ When installing a child Check that the shoulder belt is cor- restraint system rectly positioned over the child’s Observe the following precau- shoulder and that the lap belt is as tions.
Page 61 1-2. Child safety Child restraint system WARNING fixed with a child restraint ● When securing some types of child restraint systems in rear LATCH anchor seats, it may not be possible to properly use the seat belts in Child restraint LATCH ■...
Page 62 1-2. Child safety remove the head restraint. With rigid lower attachments  (P.161) Latch the buckles onto the LATCH anchors. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower con- nector system. With flexible lower attach- ...
Page 63 1-2. Child safety When installing in the rear ■ ● Follow all installation instruc- center seat tions provided by the child restraint system manufacturer. There are no LATCH anchors ● Never attach two child restraint behind the rear center seat. system attachments to the However, the inboard LATCH same anchor.
Page 64 1-2. Child safety Outboard rear seats Outboard rear seats   Remove the head restraint. (P.161) Anchor brackets Top tether strap Latch the hook onto the Center rear seat  anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
Page 65 1-2. Child safety restraint system installation, install the head restraint. Hook Top tether strap Center rear seat  Adjust the head restraint to ■ Laws and regulations pertain- ing to anchors the upmost position. The LATCH system conforms to If the head restraint interferes with FMVSS225 or CMVSS210.2.
Page 66 1-2. Child safety WARNING ● Center rear seat: When install- ing the child restraint system with the head restraint being raised, after the head restraint has been raised and then the anchor bracket has been fixed, do not lower the head restraint.
Page 67: Emergency Assistance
Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Can- ada. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
Page 68 1-3. Emergency assistance ■ Certification for the Safety Connect Helps drivers receive necessary Services response from emergency service P.70 providers. ( Subscribers have the following : U.S. Patent No. 7,508,298 B2 Safety Connect services avail- able:  Stolen Vehicle Location ...
Page 69 A variety of subscription terms Rico and Canada. are available for purchase. Con- ● Automatic Collision Notification, tact your Toyota dealer, call the Emergency Assistance, Stolen Vehicle and Enhanced Road following appropriate Safety Assistance are not available in the Connect response center or U.S.
Page 70 Automatic Collision Notifi- ■ Further information is available cation at Toyota.com in the United In case of either airbag deploy- States, Toyotapr.com in Puerto ment or severe rear-end colli- Rico and Toyota.ca in Canada. sion, the system is designed to Emergency Assistance But- ■...
Page 71 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
Page 72: 1-4. Hybrid System
1-4. Hybrid system Hybrid system features 1-4.Hybrid system Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
Page 73 If the hybrid battery (traction while driving with the shift lever in battery) becomes fully discharged D or S. and you are unable to start the hybrid system, contact your Toyota ■ EV indicator dealer. The EV indicator comes on when...
Page 74 Maintenance, repair, recycling, and disposal The gasoline engine may not stop even if the vehicle is being driven by Contact your Toyota dealer regard- the hybrid battery (traction battery). ing maintenance, repair, recycling If this continues for a few days, con- and disposal.
Page 75: Hybrid System Precautions
1-4. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high voltage system (about 650V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle. System components The illustration is an example for explanation and may differ from the actual item.
Page 76 1-4. Hybrid system ● The hybrid system will become ■ Running out of fuel hot after starting as the system When the vehicle has run out of fuel uses high voltage. Be careful of and the hybrid system cannot be both the high voltage and the started, refuel the vehicle with at high temperature, and always...
Page 77 ■ Hybrid battery (traction bat- your Toyota dealer or a qualified tery) service shop. If the hybrid bat- ● Never resell, hand over or mod- tery is not disposed of properly, ify the hybrid battery.
Page 78 To vent the vent from clogging. restart the hybrid system, con- tact your Toyota dealer. ● Do not get water or foreign materials in the air intake vent...
Page 79 If a warning light comes on, a warning message is displayed, or the 12-volt battery is discon- nected The hybrid system may not start. In this case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer.
Page 80: 1-5. Theft Deterrent System
1-5. Theft deterrent system Immobilizer system 1-5.Theft deterrent system The vehicle’s keys have built-in transponder chips that prevent the hybrid sys- tem from starting if a key has not been previously registered in the vehicle’s Vehicles with smart key sys- on-board computer.
Page 81 1-5. Theft deterrent system ■ Certification for the immobilizer system For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 82 1-5. Theft deterrent system NOTICE ■ To ensure the system oper- ates correctly Do not modify or remove the sys- tem. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 83: Alarm
1-5. Theft deterrent system oramic moon roof (if Alarm equipped) are closed before the alarm is set. : If equipped  No valuables or other per- The alarm uses light and sonal items are left in the sound to give an alert when vehicle.
Page 84 1-5. Theft deterrent system (Stopping the alarm deactivates the alarm system.) ● A person inside the vehicle opens a door or hood, or unlocks the vehicle using an inside lock but- ton. ● The 12-volt battery is recharged or replaced when the vehicle is locked.
Page 85: Vehicle Status Information And Indicators
Vehicle status informa- tion and indicators 2-1. Instrument cluster Warning lights and indica- tors .......86 Gauges and meters (with 4.2-inch display) ...92 Gauges and meters (with 7- inch display) ....96 Multi-information display ........Energy monitor/consump- tion screen....
Page 86: 2-1. Instrument Cluster
2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, center panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Instrument cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
Page 87: Instrument Cluster
2-1. Instrument cluster When analog speedometer is displayed  The units used on the meters and some indicators may differ depending on the target region. When digital speedometer is displayed  The units used on the meters and some indicators may differ depending on the target region.
Page 88 2-1. Instrument cluster Warning lights ABS warning light (P.633) Warning lights inform the driver (Canada) of malfunctions in the indicated Electric power steer- vehicle’s systems. ing system warning light (P.633) (Red/yellow) Brake system warn- ing light (P.631) PCS warning light (U.S.A.) (P.634) (Flashes or...
Page 89 (P.638) dent, which could result in death Tire pressure warning or serious injury. Have the vehicle inspected by your Toyota dealer light (if equipped) immediately if this occurs. (P.638) : These lights turn on when the...
Page 90 2-1. Instrument cluster Indicators Slip indicator light (P.370) The indicators inform the driver (Flashes) of the operating state of the *3, 5 VSC OFF indicator vehicle’s various systems. (P.370) *3, 5 Turn signal indicator PCS warning light (P.222) (P.252) BSM outside rear view Headlight indicator *5, 6 mirror indicators...
Page 91 It will turn off after a few sec- turn off, there may be a malfunction in the system. If this occurs, have onds. the vehicle inspected by your Toyota : These lights turn on when the dealer. power switch is turned to ON to indicate that a system check is being performed.
Page 92: Gauges And Meters (With 4.2-Inch Display)
2-1. Instrument cluster Gauges and meters (with 4.2-inch display) The meters display various drive information. Meter display The units used on the meter and display may differ depending on the target region. Hybrid System Indicator Displays the Hybrid System Indicator (P.93) Outside temperature (P.93) Clock (P.95) Multi-information display...
Page 93 2-1. Instrument cluster reset. Trip meters “A” and “B” can be used to record and display different distances independently. Shift position and shift range indicator Displays the selected shift position or selected shift range (P.219) Engine coolant temperature gauge Displays the engine coolant temperature ■...
Page 94 ● When “--” or “E” is displayed, the engine braking and possibly an system may be malfunctioning. accident resulting in death or Take your vehicle to your Toyota injury. dealer. ● Displays the outside temperature NOTICE within the range of -40°F (-40°C)
Page 95 2-1. Instrument cluster Vehicles with Entune Audio  P.422 Vehicles with Entune Audio  Plus or Entune Premium Audio Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. Instrument panel light control The brightness of the instrument panel lights can be adjusted by turning the dial.
Page 96: Gauges And Meters (With 7-Inch Display)
2-1. Instrument cluster Gauges and meters (with 7-inch display) The meters display various drive information. Meter display The display of the speedometer can be selected from two types, analog or digital. (P.107) Analog speedometer  The units used on the meter and display may differ depending on the target region.
Page 97 2-1. Instrument cluster Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently. Outside temperature (P.99) Multi-information display Presents the driver with a variety of driving-related data (P.101) Displays warning messages if a malfunction occurs (P.642) Shift position and shift range indicator Displays the selected shift position or selected shift range (P.219)
Page 98 2-1. Instrument cluster Odometer: Displays the total distance that the vehicle has been driven Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances independently.
Page 99 ● When “--” or “E” is displayed, the the engine after it has cooled system may be malfunctioning. completely. (P.664) Take your vehicle to your Toyota dealer. ● Displays the outside temperature Using the “ODO TRIP” within the range of -40°F (-40°C) switch to 122°F (50°C).
Page 100 2-1. Instrument cluster switch will reset the trip meter. Vehicles with Entune Audio  P.422 Vehicles with Entune Audio  Plus or Entune Premium Audio Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. Instrument panel light control The brightness of the instrument panel lights can be adjusted by turning the dial.
Page 101: Multi-Information Display
2-1. Instrument cluster (P.258) Multi-information dis- • Dynamic radar cruise control with play full-speed range (P.271) Menu icons (P.102) The multi-information dis- Information display area play is used to display fuel efficiency related informa- A variety of information can be dis- played by selecting a menu icon.
Page 102 2-1. Instrument cluster call is displayed. For details ■ The multi-information display is regarding the hands-free sys- displayed when tem, refer to P.468 (vehicles The power switch is in ON. with Entune Audio) or “NAVI- ■ When changing driving mode GATION AND MULTIMEDIA Background color of the multi-infor- SYSTEM OWNER’S MAN-...
Page 103 2-1. Instrument cluster Fuel Economy ■ Icon Display Following information is dis- Driving information dis- played. play (P.103) Driving support system information display (P.105) Audio system-linked dis- play (P.106) Vehicle information dis- play (P.106) Settings display Distance to empty (P.107) Displays the driving range with remaining fuel.
Page 104 2-1. Instrument cluster pedal according to driving condi- starting off and cruising. tions, and a score result that The ECO Accelerator Guidance display changes according to the evaluates the current driving driving status, such as when start- status. ing off or cruising. It is easier to drive in an Eco- friendly manner by driving accord- ing to the display showing the...
Page 105 2-1. Instrument cluster How to read the bar display: ■ ECO Accelerator Guid- ance/“Eco Score” will not oper- ate when Score Bar display The ECO Accelerator Guid- Unrated ance/“Eco Score” will not operate in the following situations: ● The Hybrid System Indicator is not operating.
Page 106 2-1. Instrument cluster  Dynamic radar cruise control average vehicle speed since with full-speed range hybrid system start (P.271) • “Distance”: Displays the distance Navigation system-linked ■ driven since hybrid system start display (if equipped) • “Total Time”: Displays the elapsed Select to display the following time since hybrid system start navigation system-linked infor-...
Page 107 2-1. Instrument cluster via changes to the position of the holding . When the setting ball on the display. screen is displayed, select the Maximum G-force course setting or desired value (time, This item is linked with the G-force etc.) with display and the course of the past After changing the settings, movement of the ball is displayed.
Page 108: Pksb (Parking Support Brake)
2-1. Instrument cluster warning timing. volume. BSM (Blind Spot Moni- PKSB (Parking Sup- ■ ■ tor) (if equipped) (P.281) port Brake System) (if equipped) (P.298) Select to set up the following items. Select to enable/disable the Parking Support Brake function. ...
Page 109 Select to change the display on sensor ID codes must be registered Fuel Economy (P.103). by a Toyota dealer. For information  (Audio settings) regarding changing the registered ID code set, contact your Toyota Select to enable/disable dealer.
Page 110 2-1. Instrument cluster “Energy monitor”: ■ Suspension of the settings dis- Select to enable/disable the Energy play monitor (P.111) ● In the following situations, opera- tion of the settings display will be “AWD”: temporarily suspended. Select to enable/disable the AWD •...
Page 111: Energy Monitor/Consumption Screen
2-1. Instrument cluster Energy monitor/con- Suggestion function sumption screen Displays suggestions to the driver in the following situations. You can view the status of To select a response to a dis- your vehicle on the multi- played suggestion, use the information display and the meter control switches.
Page 112 2-1. Instrument cluster Energy monitor Audio system screen ■ Entune Audio or Entune Audio Plus (vehicles without Data Com-  munication Module) Press the “MENU” button. Select “Info” on the “Menu” screen. If a screen other than “Energy monitor” is displayed, select “Energy”. Entune Audio or Entune Audio Plus (vehicles with Data Communi- ...
Page 113 2-1. Instrument cluster When the vehicle is powered by the gasoline engine  When the vehicle is charging the hybrid battery (traction battery) ...
Page 114 2-1. Instrument cluster When there is no energy flow  Hybrid battery (traction battery) status  High Multi-information display ■ Press of the meter control switches on the steering wheel and select ,and then press to select the energy monitor display. These images are examples only, and may vary slightly from actual condi- tions.
Page 115 2-1. Instrument cluster When the vehicle is powered by both the gasoline engine and the  electric motor (traction motor) When the vehicle is powered by the gasoline engine  When the vehicle is charging the hybrid battery (traction battery) ...
Page 116 2-1. Instrument cluster When there is no energy flow  Hybrid battery (traction battery) status  High...
Page 117 2-1. Instrument cluster mation”. ■ Remaining charge amount The image is an example only, and warning of hybrid battery (trac- may vary slightly from actual condi- tion battery) tions. ● The buzzer sounds intermittently when the hybrid battery (traction battery) remains without charging while the shift lever is in N, or the remaining charge amount drops below a certain level.
Page 118 2-1. Instrument cluster History Plus: ■ Displays the daily average fuel con- Entune Audio or Entune  sumption. (Instead of the date, “Trip Audio Plus (vehicles without 1” through “Trip 5” will be dis- Data Communication Module) played.) Press the “MENU” button. •...
Page 119: Before Driving
Before driving 3-1. Key information Keys ......3-2. Opening, closing and locking the doors Side doors ....Back door....Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Driving position memory ........Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
Page 120: Key Information Keys
3-1. Key information Keys 3-1.Key information Key number plate ■ When riding in an aircraft Key types When bringing a key with wireless remote control function onto an air- The following keys are provided craft, make sure you do not press with the vehicle.
Page 121 The number of keys already regis- You can replace the battery by your- tered to the vehicle can be con- self (P.603). However, as there is firmed. Ask your Toyota dealer for a danger that the electronic key may details. be damaged, it is recommended ■...
Page 122 (P.127) with the key, causing the key to : This setting must be customized not function properly. at your Toyota dealer. ■ In case of a smart key system Vehicles with smart key sys- malfunction or other key- ...
Page 123 3-1. Key information Opens and closes the power back door (P.137) Sounds the alarm (P.123) : These settings must be custom- ized at your Toyota dealer. : If equipped ■ Conditions affecting operation Vehicles without smart key system  ■...
Page 124 3-1. Key information ■ Certification for wireless remote control...
Page 125 3-1. Key information position while pressing the button. Using the master key (vehicles without smart Using the mechanical key key system) (vehicles with smart key system) To take out the mechanical key, slide the release lever take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side.
Page 126 3-1. Key information key battery is depleted or the entry function does not operate properly, you will need the mechanical key. (P.657) ■ If you lose your keys P.656 ■ If a wrong key is used The key cylinder rotates freely to isolate inside mechanism.
Page 127: 3-2. Opening, Closing And Locking The Doors
: This setting must be customized Grip the front passenger’s at your Toyota dealer. door handle or rear door han- dle (some models) to unlock all the doors Make sure to touch the sensor on the back of the handle.
Page 128 Turn and hold to open the side win- dows. : These settings must be custom- ized at your Toyota dealer. Vehicles with smart key sys-  The doors can also be locked Locks all the doors...
Page 129 3-2. Opening, closing and locking the doors are operating using the wireless Multi-informa- Unlocking func- remote control. tion dis- tion ■ Security feature play/Beep Vehicles without smart key system  Holding the If a door is not opened within driver’s door han- approximately 60 seconds after the dle unlocks only vehicle is unlocked using the wire-...
Page 130 3-2. Opening, closing and locking the doors vehicle once more. ● Do not pull the inside handle of the doors while driving. ■ Setting the alarm (if equipped) Be especially careful for the Locking the doors will set the alarm front doors, as the doors may system.
Page 131 3-2. Opening, closing and locking the doors Vehicles with smart key system  Unlocking and locking the The door cannot be locked if the doors from the inside power switch is in ACC or ON, or the electronic key is left inside the Using the door lock switch ■...
Page 132 3-2. Opening, closing and locking the doors Function Operation All doors are automatically Speed linked locked when door locking vehicle speed is function approximately 12mph (20 km/h) or higher. All doors are automatically Shift position locked when linked door lock- shifting the shift ing function lever to position...
Page 133: Back Door
3-2. Opening, closing and locking the doors Back door ● Never let anyone sit in the lug- gage compartment. In the event of sudden braking, The back door can be sudden swerving or a collision, they are susceptible to death or locked/unlocked and serious injury.
Page 134 When installing an shut if it is not opened fully, accessory part to the back door, while on a steep incline. Make using a genuine Toyota part is sure that the back door is recommended. secured before using the lug- gage compartment.
Page 135 3-2. Opening, closing and locking the doors electronic key, the key may be detected as being in the vehicle. In this case, vehicle may be unlocked.) Unlocking and locking the back door from the inside Using the door lock switch ■...
Page 136 3-2. Opening, closing and locking the doors Turn the cover. ■ Luggage compartment light The luggage compartment light turns on when the back door is opened with the luggage compart- ment light switch on. When the power switch is turned to OFF, the light will go off automati- Move the lever.
Page 137 Pressing the switch while the power back door is opening/closing stops ● Do not attach any accessories other than genuine Toyota parts the operation. When the switch is to the back door. pressed again during the halted operation, the back door will per- ●...
Page 138 3-2. Opening, closing and locking the doors opener switch. Using the back door han- ■ dles When the back door is locked: While carrying the electronic key Lower the back door using the on your person, press the back back door handle door opener switch.
Page 139 3-2. Opening, closing and locking the doors Kick sensor Kick sensor Hands Free Power Back Hands Free Power Back Door operation detection Door operation detection area area When the sensor detects that Smart key system operation your foot is pulled back, a detection area (P.147) buzzer will sound and the Perform a kick operation by...
Page 140 3-2. Opening, closing and locking the doors ■ Back door closer In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. Whatever the state of the power ■...
Page 141 3-2. Opening, closing and locking the doors the jam protection function, etc., too close to the rear bumper while the back door is automati- ● When an external radio wave cally closing after a door reserve source interferes with the commu- lock operation is performed, the nication between the electronic door reserve lock function is can-...
Page 142 3-2. Opening, closing and locking the doors ● When a small animal or small the screwdriver with a rag. object, such as a ball, moves under the rear bumper ● When an object is moved from under the rear bumper ●...
Page 143 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended.
Page 144 Failure to do so may cause death ● Do not attach heavy accesso- or serious injury. ries to the back door. When attaching, ask your Toyota ● Check the safety of the sur- dealer for details. rounding area to make sure there are no obstacles or any- ●...
Page 145 Do not apply excessive force to sor operates. If it does not oper- the back door while the power ate, have the vehicle inspected back door is operating. by your Toyota dealer. ● Take care not to damage the sensors (installed on the right ●...
Page 146 3-2. Opening, closing and locking the doors that position. Changing settings of the power back door system (vehicles with power back door) The settings of the power back door system can be changed by displaying the “Vehicle Set- tings” - “PBD” screen from the screen of the multi-informa- ■...
Page 147: Smart Key System
3-2. Opening, closing and locking the doors Smart key system Antennas inside the cabin ■ Effective range (areas within : If equipped which the electronic key is detected) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket.
Page 148 3-2. Opening, closing and locking the doors ● When an exterior alarm sounds mechanical key, to unlock the once for 5 seconds doors. ■ Turning an electronic key to Correction pro- Situation battery-saving mode cedure ● When battery-saving mode is set, An attempt was battery depletion is minimized by Close all of the...
Page 149 3-2. Opening, closing and locking the doors tact with, or is covered by the fol- is started or power switch modes lowing metallic objects are changed. • Cards to which aluminum foil is ● Do not leave the electronic key on attached top of the instrument panel or near •...
Page 150 3-2. Opening, closing and locking the doors the effective range, the door may ■ To operate the system properly lock and unlock repeatedly. In that Make sure to carry the electronic case, follow the following correc- key when operating the system. Do tion procedures to wash the vehi- not get the electronic key too close cle:...
Page 151 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 152 3-2. Opening, closing and locking the doors...
Page 153 Radio waves could have unex- pected effects on the operation of such medical devices. Ask your Toyota dealer for details on disabling the entry function.
Page 154: 3-3. Adjusting The Seats
3-3. Adjusting the seats Power seat (driver’s side Front seats 3-3.Adjusting the seats  only) The seats can be adjusted (longitudinally, vertically, etc.). Adjust the seat to ensure the correct driving posture. Adjustment procedure Manual seat  Seat position adjustment switch Seatback angle adjustment switch...
Page 155: Rear Seats
3-3. Adjusting the seats Rear seats WARNING ● Do not put your hands under the seat or near the moving parts to Reclining adjustments and avoid injury. folding the seatbacks can Fingers or hands may become be done with lever opera- jammed in the seat mechanism.
Page 156 3-3. Adjusting the seats This step is not necessary when WARNING operating the left side seat only. ● After adjusting the seat, make Folding down the seat- ■ sure that the seat is locked in backs position. If the seatback is not securely While pulling the seatback angle locked, the red marking will be adjustment lever...
Page 157: Driving Position Memory
3-3. Adjusting the seats Driving position mem- WARNING ■ When folding the rear seat- backs down : If equipped ● Do not fold the seatbacks down while driving. This feature automatically adjusts the driver’s seat to ● Stop the vehicle on level ground, set the parking brake suit your preferences.
Page 158 3-3. Adjusting the seats ■ Operating the driving position memory after turning the power switch to OFF Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again.
Page 159 3-3. Adjusting the seats register, and then close the that has already been recorded, the seat will not move. driver’s door. If 2 or more keys are in the vehi- Cancelation procedure ■ cle, the driving position cannot Carry only the key you want to be recorded properly.
Page 160: Head Restraints
3-3. Adjusting the seats Center rear seat ■ Head restraints Head restraints are provided for all seats. WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●...
Page 161 3-3. Adjusting the seats Outboard rear seats ■ Removing the head Align the head restraint with the restraints installation holes and push it Pull the head restraint up while down to the lowest lock position. pressing the lock release button If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle.
Page 162: 3-4. Adjusting The Steering Wheel And Mirrors
3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
Page 163: Inside Rear View Mirror
3-4. Adjusting the steering wheel and mirrors Inside rear view mir- Anti-glare function (vehi- cles with manual anti- glare inside rear view mir- : If equipped ror) The rear view mirror’s posi- Reflected light from the head- tion can be adjusted to lights of vehicles behind can be enable sufficient confirma- reduced by operating the lever.
Page 164 3-4. Adjusting the steering wheel and mirrors Vehicles without garage door Vehicles with garage door opener   opener Vehicles with garage door  opener ■ To prevent sensor error (vehi- cles with auto anti-glare inside rear view mirror) To ensure that the sensors operate properly, do not touch or cover them.
Page 165: Digital Rear-View Mirror165
3-4. Adjusting the steering wheel and mirrors Digital Rear-view Mir- • Change to digital mirror mode and adjust the display settings. ● As the range of the image dis- played by the Digital Rear-view : If equipped Mirror is different from that of The Digital Rear-view Mirror the optical mirror, make sure to check this difference before...
Page 166 3-4. Adjusting the steering wheel and mirrors optical mirror mode. shade for the panoramic moon roof (if equipped). ● Any of the following conditions may occur when driving in the dark, such as at night. None of them indicates that a malfunction has occurred.
Page 167 3-4. Adjusting the steering wheel and mirrors Press of the select buttons to select and press the menu/enter button. The icons will disappear. Icons Settings Select to enable/disable the automatic anti-glare func- Display settings (digital mir- ■ tion. ror mode) Responding to the bright- Settings of the display in the dig- ness of the headlights of...
Page 168 3-4. Adjusting the steering wheel and mirrors played. Icons Settings Select to zoom in/out the displayed image. Select to enable/disable the PLS (point light source) mode. The glare from the head- lights of vehicles behind is reduced to help ensure an image on the display in the Press of the...
Page 169 3-4. Adjusting the steering wheel and mirrors ficult to see. Clean the mirror surface gently using a soft dry cloth. Cleaning the camera ■ If the camera lens is dirty, the displayed image may not be clear. In this case, clean it with a WARNING soft cloth dampened with water.
Page 170 If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. If you notice any symptoms If you notice any of the following symptoms, refer to the following table for the likely cause and the solution.
Page 171 3-4. Adjusting the steering wheel and mirrors Symptom Likely cause Solution Clean the mirror surface The mirror surface is gently, using a soft dry dirty. cloth. Change to optical mirror mode. Sunlight or headlights (If the light is coming are shining directly into through the moon roof [if the Digital Rear-view equipped] or panoramic...
Page 172 Toyota dealer. The display is dim and Change to optical mirror The system may be mal- mode and have the vehi- is displayed.
Page 173 Rear-view Mirror will does not disap- turn off.) pear even though the mirror is cool, have the vehicle inspected by your Toyota dealer. Change to optical mirror mode and have the vehi- cle inspected by your Toyota dealer. The lever cannot be...
Page 174: Outside Rear View Mirrors
3-4. Adjusting the steering wheel and mirrors Outside rear view mir- Adjustment procedure rors To select a mirror to adjust, press the switch. The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. ■...
Page 175 3-4. Adjusting the steering wheel and mirrors WARNING ■ When a mirror is moving To avoid personal injury and mir- ror malfunction, be careful not to get your hand caught by the mov- ing mirror.
Page 176 3-5. Opening, closing the windows and moon roof between the side window and the Power windows 3-5.Opening, closing the windows and moon roof window frame while the side window is closing, side window movement is stopped and the side window is Opening and closing the opened slightly.
Page 177 (P.83) their body in a position where it : These settings must be custom- could be caught when a power ized at your Toyota dealer. window is being operated. ■ Power window open reminder function Vehicles without smart key system ...
Page 178 3-5. Opening, closing the windows and moon roof Preventing accidental WARNING operation (window lock ● When using the wireless remote control, key or mechanical key switch) and operating the power win- dows, operate the power win- This function can be used to dow after checking to make prevent children from acciden- sure that there is no possibility...
Page 179: Moon Roof
Vehicles with alarm: The alarm may be triggered if the alarm is set and the moon roof is closed using the door lock linked moon roof operation function. (P.83) : These settings must be custom- ized at your Toyota dealer.
Page 180: Moon Roof
■ Opening the moon roof cle inspected by your Toyota dealer. ● Do not allow any passengers to ■ If the moon roof does not move put their hands or head outside normally the vehicle while it is moving.
Page 181: Moon Roof
3-5. Opening, closing the windows and moon roof ● The jam protection function may WARNING not work if something gets ● Check to make sure that all pas- caught just before the moon sengers do not have any part of roof is fully closed.
Page 182: Panoramic Moon Roof
3-5. Opening, closing the windows and moon roof Panoramic moon roof switch in either direction to stop the electronic sunshade : If equipped partway. Use the overhead switches Tilting the panoramic moon ■ to operate the panoramic roof up and down moon roof and electronic sunshade.
Page 183 (P.83) ■ The panoramic moon roof can : These settings must be custom- be operated when ized at your Toyota dealer. The power switch is in ON. ■ When the panoramic moon roof ■ Operating the panoramic moon...
Page 184 ● Do not allow any passengers to procedure correctly, have the vehi- put their hands or head outside cle inspected by your Toyota dealer. the vehicle while it is moving. ■ Panoramic moon roof open ●...
Page 185 3-5. Opening, closing the windows and moon roof ■ Jam protection function WARNING ● Never use any part of your body ● Check to make sure that all pas- to intentionally activate the jam sengers do not have any part of protection function.
Page 186 3-5. Opening, closing the windows and moon roof...
Page 187: Driving
Driving 4-1. Before driving 4-5. Using the driving support systems Driving the vehicle..Toyota Safety Sense 2.0 Cargo and luggage ........Vehicle load limits ..PCS (Pre-Collision System) Trailer towing..........Dinghy towing ..... LTA (Lane Tracing Assist) 4-2. Driving procedures ........
Page 188 4-6. Driving tips Hybrid vehicle driving tips ........Winter driving tips ..Utility vehicle precautions ........
Page 189: Driving The Vehicle
4-1. Before driving Set the parking brake Driving the vehicle 4-1.Before driving (P.223), and shift the shift lever to P (P.219). The following procedures Turn the power switch to OFF should be observed to to stop the hybrid system. ensure safe driving: Lock the door, making sure that you have the key on your Driving procedure...
Page 190 Drive-Start Control does not work eration is avoided, the “Start” when Trail Mode is turned on. score will increase. ■ Breaking in your new Toyota ● When driving: To extend the life of the vehicle, After accelerating to the desired...
Page 191 4-1. Before driving ● The driver should pay extra WARNING attention to pedestrians when Observe the following precau- the vehicle is powered only by tions. the electric motor (traction Failure to do so may result in motor). As there is no engine death or serious injury.
Page 192 4-1. Before driving ● Sudden acceleration, engine WARNING braking due to shifting, or ● Do not adjust the position of the changes in engine speed could steering wheel, the seat, or the cause the vehicle to skid. inside or outside rear view mir- rors while driving.
Page 193 • Gas may leak from a cigarette lighter or spray can, and may Have the brake pads checked and lead to a fire. replaced by your Toyota dealer as • The temperature inside the soon as possible. vehicle may cause the plastic...
Page 194 4-1. Before driving ● If the electronically controlled WARNING brake system does not operate, ● Do not leave a door or window do not follow other vehicles open if the curved glass is closely and avoid hills or sharp coated with a metallized film turns that require braking.
Page 195 4-1. Before driving ● Changes in quantity and quality NOTICE of oil and fluid used for the ■ Avoiding damage to vehicle engine, hybrid transaxle (front parts and rear), etc. ● Do not turn the steering wheel ● Lubricant condition for the bear- fully in either direction and hold ings and suspension joints it there for an extended period...
Page 196: Cargo And Luggage
4-1. Before driving Cargo and luggage ● Secure all items in the occupant compartment. ● When you fold down the rear Take notice of the following seats, long items should not be information about storage placed directly behind the front precautions, cargo capacity seats.
Page 197 4-1. Before driving For example, if the “XXX” Calculation formula for amount equals 1400 lbs. and your vehicle there will be five 150 lb passen- gers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 ...
Page 198 4-1. Before driving load ● If driving for a long distance, on rough roads, or at high speeds, As shown in the example above, stop the vehicle now and then if the number of occupants during the trip to make sure the increases, the cargo and lug- cargo remains in its place.
Page 199: Vehicle Load Limits
4-1. Before driving Vehicle load limits WARNING ■ Overloading the vehicle Vehicle load limits include Do not overload the vehicle. It may not only cause damage to total load capacity, seating the tires, but also degrade steer- capacity, TWR (Trailer ing and braking ability, resulting in Weight Rating) and cargo an accident.
Page 200: Trailer Towing
Tow- ing a trailer can have an Contact your Toyota dealer for adverse impact on handling, further information about addi- performance, braking, dura- tional requirements such as a bility, and fuel consumption.
Page 201 ● If the gross trailer weight your vehicle speed under the exceeds unbraked TWR, trailer speed of which you experience brakes are required. Toyota rec- the instability. ommends trailers with brakes that conform to all applicable ● Do not make jerky, abrupt or federal and state/provincial reg- sharp turns.
Page 202 4-1. Before driving equipment installed on the vehi- WARNING cle) and the tongue weight. ● Never tow a trailer without using a safety chain securely attached to both the trailer and the vehi- cle. If damage occurs to the coupling unit or hitch ball, there is danger of the trailer wander- ing into another lane.
Page 203 4-1. Before driving base vehicle with one driver, one front passenger, hitch and hitch systems (if required). Additional optional equipment, pas- sengers and cargo in the vehicle will reduce the trailer weight rating so as not to exceed GCWR, GVWR and GAWR.
Page 204 Toyota dealer. towing as described below.  If you wish to install a trailer  To ensure the recommended hitch, contact your Toyota values shown below, the dealer. trailer must be loaded by  Use only a hitch that con-...
Page 205 NOTICE ■ When installing a trailer hitch Use only the position recom- mended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Coupler Trailer ball...
Page 206 Do not exceed the someone guide you when posted towing speed limit. reversing to reduce the risk of  Toyota recommends that the an accident. vehicle-trailer speed limit is 65  As stopping distance is mph (104 km/h) on a flat, increased when towing a straight, dry road.
Page 207 4-1. Before driving vehicle control. This is espe- long downhill grades. cially true on wet or slippery  Avoid holding the brake pedal surfaces. down too long or applying the  Avoid jerky starts or sudden brakes too frequently. This acceleration.
Page 208 • Check the tires of the vehicle and Toyota recommends that you do not the trailer. tow a trailer until the vehicle has • Check the load in the trailer.
Page 209: Dinghy Towing
4-1. Before driving swaying of the towing vehicle-trailer Dinghy towing increases as speed increases. Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground.
Page 210: 4-2. Driving Procedures
Pull the parking brake switch The immobilizer system may not to check that the parking have been deactivated. (P.80) brake is set. (P.223) Contact your Toyota dealer. The parking brake indicator will ■ When the steering lock cannot come on.
Page 211 ■ Key reminder function cult to start, have your vehicle A buzzer sounds if the driver’s door checked by your Toyota dealer is opened while the power switch is immediately. in OFF or ACC to remind you to remove the key.
Page 212: Power (Ignition) Switch (Vehicles With Smart Key System)
4-2. Driving procedures Power (ignition) NOTICE switch (vehicles with ■ To prevent 12-volt battery dis- smart key system) charge Do not leave the power switch in ACC or ON mode for long periods Performing the following of time without the hybrid system operations when carrying the electronic key on your person starts the hybrid...
Page 213 ● The immobilizer system may not have been deactivated. (P.80) Contact your Toyota dealer. ● If a message related to start-up is shown on the multi-information display, read the message and fol- low the instructions.
Page 214 Always start the hybrid system tioning. Have the vehicle inspected while sitting in the driver’s seat. by your Toyota dealer immediately. Do not depress the accelerator pedal while starting the hybrid ■ If the “READY” indicator does system under any circumstances.
Page 215 4-2. Driving procedures Check the parking brake indicator Changing power switch is illuminated. modes Shift the shift position to P. Press the power switch Modes can be changed by shortly and firmly. pressing the power switch with the brake pedal released. (The The hybrid system will stop, and the mode changes each time the meter display will be extinguished.
Page 216 4-2. Driving procedures Check that “ACCESSORY” is ■ Auto power off function displayed on the multi-infor- If the vehicle is left in ACC for more mation display and press the than 20 minutes or ON (the hybrid power switch shortly and system is not operating) for more than an hour with the shift lever in P, firmly.
Page 217: Ev Drive Mode
4-2. Driving procedures EV drive mode ■ Situations in which EV drive mode cannot be turned on It may not be possible to turn EV In EV drive mode, electric drive mode on in the following situa- power is supplied by the tions.
Page 218 4-2. Driving procedures ■ Automatic cancelation of EV WARNING drive mode ■ Caution while driving When driving in EV drive mode, the gasoline engine may automatically When driving in EV drive mode, restart in the following situations. pay special attention to the area When EV drive mode is canceled, a around the vehicle.
Page 219: Hybrid Transmission
4-2. Driving procedures ■ Restraining sudden start (Drive- Hybrid transmission Start Control) P.190 Select the shift position depending on your purpose WARNING and situation. When driving on slippery ■ road surfaces Be careful of downshifting and Shift position purpose sudden acceleration, as this could and functions result in the vehicle skidding to the side or spinning.
Page 220 Have the vehicle inspected by your Toyota While the power switch dealer immediately. is in ON and the brake pedal...
Page 221 4-2. Driving procedures The shift lever can be shifted while both buttons are pressed. Upshifting WARNING Downshifting ■ To prevent an accident when The selected shift range, from S1 to releasing the shift lock S6, will be displayed on the multi- Before pressing the shift lock information display.
Page 222: Turn Signal Lever
S Operating instructions This may indicate a malfunction in the transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situa- tion, the transmission will operate in the same manner as when the shift lever is in D.)
Page 223: Parking Brake
4-2. Driving procedures burned out. Parking brake ■ If the turn signals stop flashing before a lane change has been The parking brake can be performed set or released automati- Operate the lever again. cally or manually. In auto- ■ To discontinue flashing of the turn signals during a lane matic mode, the parking...
Page 224 4-2. Driving procedures brake will be released, and The parking brake indicator light and parking brake lamp will turn on. the parking brake indicator Pull and hold the parking brake light and parking brake lamp switch if an emergency occurs and will turn off.
Page 225 The parking brake may be tioning. Have the vehicle inspected released unintentionally and there by your Toyota dealer. is the danger of the vehicle mov- ■ Parking brake operation sound ing that may lead to an accident resulting in death or serious injury.
Page 226: Brake Hold
4-2. Driving procedures Brake Hold NOTICE ■ When parking the vehicle The brake hold system Before you leave the vehicle, shift the shift position to P, set the park- keeps the brake applied ing brake and make sure that the when the shift lever is in D, vehicle does not move.
Page 227 Have and a message will be shown on the the vehicle inspected at your Toyota multi-information display. The park- dealer. ing brake will then be set automati- cally.
Page 228 4-2. Driving procedures WARNING ■ When stopped on a slippery road The system cannot stop the vehi- cle when the gripping ability of the tires has been exceeded. Do not use the system when stopped on a slippery road. NOTICE ■...
Page 229: Headlight Switch
4-3. Operating the lights and wipers Headlight switch 4-3.Operating the lights and wipers (U.S.A.) Off (Canada) The daytime running lights turn on. The headlights can be oper- (P.229) ated manually or automati- cally. Type B  Turning on the headlights Operating the switch turns on the lights as follows:...
Page 230 4-3. Operating the lights and wipers the low beam headlight lights, and illuminate dimmer than the low beam headlight lights. ● Vehicles with projector head- lights: The daytime running lights illuminate using the same lights as the parking lights and illuminate brighter than the parking lights.
Page 231 You can flash the high beams with The system may be malfunctioning. the headlights on or off. Have the vehicle inspected by your Toyota dealer. AFS (Adaptive Front-light- ■ Customization ing System) (if equipped) Settings (e.g. light sensor sensitiv- ity) can be changed.
Page 232: Automatic High Beam
4-3. Operating the lights and wipers the tire’s angle as controlled by Automatic High Beam steering input. AFS operates at speeds of The Automatic High Beam approximately 6 mph (10 km/h) uses an in-vehicle camera or higher. sensor to assess the bright- ness of streetlights, the lights of vehicles ahead etc., and automatically turns the...
Page 233 4-3. Operating the lights and wipers Push the lever away from • When the vehicle is cut in front of by another vehicle you with the headlight switch • When vehicles ahead are hidden in the position. from sight due to repeated curves, road dividers or roadside trees The Automatic High Beam indicator •...
Page 234 • The camera sensor is deformed or The system may be malfunctioning. dirty Have the vehicle inspected by your • When the temperature of the cam- Toyota dealer. era sensor is extremely high ■ Temporarily lowering sensor • Surrounding brightness levels are...
Page 235: Fog Light Switch
4-3. Operating the lights and wipers Fog light switch : If equipped The fog lights offer improved visibility in diffi- cult driving conditions, such as in rain and fog. Switching to the high beam ■ Operating procedure Press the Automatic High Beam switch.
Page 236: Windshield Wipers And Washer
4-3. Operating the lights and wipers Windshield wipers and High speed washer operation Temporary Operating the lever can operation switch between automatic : For the U.S.A. operation and manual oper- : For Canada ation, or can use the If equipped, wiper intervals can washer.
Page 237 4-3. Operating the lights and wipers Rain-sensing windshield wip-  Increases the sensitivity Decreases the sensitivity Rain-sensing opera- tion Low speed Washer/wiper dual operation operation High speed Pulling the lever operates the wip- operation ers and washer. Temporary The wipers will automatically oper- operation ate a couple of times after the washer squirts.
Page 238 185°F (85°C) or higher, blocked or 5°F (-15°C) or lower, the auto- matic operation may not occur. In In this case, contact your Toyota this case, operate the wipers in dealer. any mode other than “AUTO”. Do not try to clear it with a pin or other object.
Page 239: Rear Window Wiper And Washer
When the back door is closed, wiper operation will resume. : The setting must be customized at Intermittent your Toyota dealer. operation ■ Reverse-linked rear window wiper function Normal oper- When the shift lever is shifted to R...
Page 240: Washer
Do not operate the switch continu- ally as the washer fluid pump may overheat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. ■...
Page 241: Refueling
4-4. Refueling Opening the fuel tank 4-4.Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure The fuel tank of your vehicle to do so may result in death or has a special structure, serious injury.
Page 242 4-4. Refueling WARNING ■ When refueling Observe the following precautions to prevent fuel overflowing from the fuel tank: ● Securely insert the fuel nozzle into the fuel filler neck. ● Stop filling the tank after the fuel nozzle automatically clicks off. Turn the fuel tank cap slowly ●...
Page 243 WARNING ■ When replacing the fuel tank Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
Page 244: 4-5. Using The Driving Support Systems
Toyota Safety Sense 4-5.Using the driving support systems WARNING ■ Toyota Safety Sense 2.0 The Toyota Safety Sense 2.0 is designed to operate under the The Toyota Safety Sense 2.0 assumption that the driver will consists of the following drive safely, and is designed to...
Page 245 If the radar sensor, front grille, or front bumper needs to be Observe the following precau- removed and installed, or tions. replaced, contact your Toyota Otherwise, the radar sensor may dealer. not operate properly, possibly leading to an accident resulting in ■...
Page 246 ● Do not attach objects, such as If the windshield needs to be stickers, transparent stickers, replaced, contact your Toyota etc., to the outer side of the dealer. windshield in front of the front camera (shaded area in the ●...
Page 247 4-5. Using the driving support systems ■ Certification For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 248 When the normal operating condi- tions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions To clean the part When the area of the wind-...
Page 249 If the message does not disappear, the surface of range, such as contact your Toyota dealer. the sunshade when the vehi- • When the temperature around the may cause the radar sensor is outside of the...
Page 250: Pcs (Pre-Collision System)
4-5. Using the driving support systems PCS (Pre-Collision Sys- System functions tem) Pre-collision warning ■ When the system determines The pre-collision system that the possibility of a frontal uses a radar sensor and collision is high, a buzzer will front camera to detect sound and a warning message objects (P.250) in front of will be displayed on the multi-...
Page 251 4-5. Using the driving support systems ■ Pre-collision braking WARNING ● When the pre-collision braking ■ Limitations of the pre-colli- function is operating, a large sion system amount of braking force will be ● The driver is solely responsible applied. for safe driving.
Page 252 4-5. Using the driving support systems Changing settings of the WARNING pre-collision system ● When your vehicle is towing another vehicle Enabling/disabling the pre- ■ ● When transporting the vehicle collision system via truck, boat, train or similar means of transportation The pre-collision system can be ●...
Page 253 4-5. Using the driving support systems Early Middle This is the default setting. Late ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a detected object is high. Each function is operational at the following speed ●...
Page 254 4-5. Using the driving support systems ● Pre-collision braking Relative speed between Detectable objects Vehicle speed your vehicle and object Approx. 7 to 110 mph Approx. 7 to 110 mph Vehicles (10 to 180 km/h) (10 to 180 km/h) Bicyclists and pedestri- Approx.
Page 255 4-5. Using the driving support systems the entrance of a curve your vehicle • When passing under an object (road sign, billboard, etc.) • When there are patterns or paint in front of your vehicle that may be mistaken for a detectable object •...
Page 256 4-5. Using the driving support systems • If a detectable object makes an truck abrupt maneuver (such as sudden • If a preceding vehicle has a low swerving, acceleration or deceler- rear end, such as a low bed trailer ation) •...
Page 257 4-5. Using the driving support systems such as heavy rain, fog, snow or a • If the vehicle is not properly main- sandstorm tained (brakes or tires are exces- • When driving through steam or sively worn, improper tire inflation smoke pressure, etc.) •...
Page 258: Lta (Lane Tracing Assist)
4-5. Using the driving support systems LTA (Lane Tracing WARNING Assist) ■ Before using LTA system Do not rely solely upon the LTA ● system. The LTA system does When driving on highways not automatically drive the vehi- and freeways with white cle or reduce the amount of (yellow) lane lines, this attention that must be paid to...
Page 259 ● Vehicle is being driven around a sharp curve. ● If your windshield needs repairs, contact your Toyota dealer. ■ Conditions in which functions may not operate properly In the following situations, the functions may not operate prop- erly and the vehicle may depart from its lane.
Page 260 4-5. Using the driving support systems ● The vehicle is driven in an area WARNING without white (yellow) lines, ● Objects or patterns that could such as in front of a tollgate or be mistaken for white (yellow) checkpoint, or at an intersec- lines are present on the side of tion, etc.
Page 261 4-5. Using the driving support systems ing is displayed on the multi- WARNING information display, and a warn- ● The traffic lane is excessively ing buzzer will sound to alert the narrow or wide. driver. ● The vehicle is extremely tilted When the warning buzzer sounds, due to carrying heavy luggage or having improper tire pres-...
Page 262 4-5. Using the driving support systems tem provides assistance as nec- Vehicle sway warning func- ■ essary by operating the steering tion wheel in small amounts for a When the vehicle is swaying short period of time to keep the within a lane, the warning vehicle in its lane.
Page 263 4-5. Using the driving support systems traffic jam, this function will operate next time the hybrid system is to help follow a preceding vehicle started. by monitoring the position of the preceding vehicle. If the system detects that the steer- ing wheel has not been operated for a fixed amount of time or the steering wheel is not being firmly...
Page 264 4-5. Using the driving support systems Inside of displayed lines is Indicates that steering wheel assis-  tance of the steering assist function white or lane centering function is operat- ing. Both outer sides of the lane are dis- played: Indicates that steering wheel assist of the lane centering function is operating.
Page 265 4-5. Using the driving support systems • LTA is turned on. This function operates when all of • Vehicle speed is approximately 32 the following conditions are met. mph (50 km/h) or more. • Setting for “Sway Warning” in the •...
Page 266 4-5. Using the driving support systems ■ Temporary cancelation of func- ■ Hands off steering wheel warn- tions ● When operation conditions are no In the following situations, a warning longer met, a function may be message urging the driver to hold temporarily canceled.
Page 267 ● “LTA Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. ● “LTA Unavailable” The system is temporarily canceled...
Page 268: Rsa (Road Sign Assist)
4-5. Using the driving support systems nizes a sign, the sign will be dis- RSA (Road Sign played on the multi-information Assist) display. : If equipped  When the driving support sys- tem information display is The RSA system recognizes selected, a maximum of 3 specific road signs using signs can be displayed.
Page 269 4-5. Using the driving support systems speed unit) may be detected Supported types of road incorrectly and a warning dis- signs play may not operate properly. The following types of road ■ Setting procedure signs are recognized. P.107 A non-official or a recently intro- ■...
Page 270 ON. ■ If “RSA Malfunction Visit Your Dealer” is shown The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer. ■ Customization Some functions can be customized. (P.107) Multi-information display Set speed...
Page 271: Trol With Full-Speed Range
4-5. Using the driving support systems Indicators WARNING Operation switches ■ ● The dynamic radar cruise con- trol with full-speed range pro- vides driving assistance to reduce the driver’s burden. However, there are limitations to the assistance provided. Read the following conditions carefully.
Page 272 4-5. Using the driving support systems ■ Cautions regarding the driv- WARNING ing assist systems ● Assisting the driver to operate Observe the following precau- the vehicle tions, as there are limitations to The dynamic radar cruise control the assistance provided by the system.
Page 273 4-5. Using the driving support systems ● When weather conditions are bad enough that they may pre- vent the sensors from detecting correctly (fog, snow, sand- storm, heavy rain, etc.) ● When there is rain, snow, etc. on the front surface of the radar or front camera ●...
Page 274 4-5. Using the driving support systems When there are no vehicles ahead The vehicle travels at the speed set by the driver. Example of deceleration cruising and follow-up cruising When a preceding vehicle driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automatically decelerates your vehicle.
Page 275 4-5. Using the driving support systems mately 20 mph [30 km/h]) and release when the desired speed is reached. and press the “-SET” switch to set the speed. In the vehicle-to-vehicle dis- tance control mode, the set Cruise control “SET” indicator will come on.
Page 276 4-5. Using the driving support systems dance with vehicle speed. When Changing the vehicle-to- the vehicle is stopped by system vehicle distance (vehicle- control, the vehicle stops at a to-vehicle distance con- certain vehicle-to-vehicle dis- trol mode) tance depending on the situa- tion.
Page 277 4-5. Using the driving support systems Canceling and resuming the speed control Warnings may not occur ■ when In the following instances, warn- Pressing the cancel switch ings may not occur even when cancels the speed control. the vehicle-to-vehicle distance is The speed control is also canceled small.
Page 278 4-5. Using the driving support systems With the cruise control off, setting: P.277 press and hold the cruise control main switch for 1.5 seconds or more. Immediately after the switch is pressed, the dynamic radar cruise control indicator will come on. After- wards, it switches to the cruise con- trol indicator.
Page 279 Contact your Toyota dealer. As the sensor may not be able to ■ Automatic cancelation of con- correctly detect these types of vehi-...
Page 280 4-5. Using the driving support systems ● Motorcycles traveling in the same ● When steering wheel operation or lane your position in the lane is unsta- ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ●...
Page 281: Bsm (Blind Spot Monitor)
4-5. Using the driving support systems BSM (Blind Spot Moni- WARNING tor) ■ Cautions regarding the use of the RCTA function : If equipped The driver is solely responsible for safe driving. Always drive safely, The Blind Spot Monitor is a taking care to observe your sur- system that has 2 functions: roundings.
Page 282 There may be a sensor malfunction from behind the rear seat. or misaligned. Have the vehicle inspected at a Toyota dealer. ■ Customization Some functions can be customized. (P.107)
Page 283 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan  and Puerto Rico For vehicles sold in Canada ...
Page 284 Do not modify the sensor or sur- rounding area on the rear bumper. ● If a sensor or the rear bumper needs to be removed/installed or replaced, contact your Toyota ● Keep the sensors and the sur- dealer. rounding areas on the rear ●...
Page 285 4-5. Using the driving support systems The Blind Spot Monitor function Vehicles that can be detected by the Blind Spot Monitor ■ The BSM function uses radar sensors to detect the following vehi- cles traveling in adjacent lanes and advises the driver of the pres- ence of such vehicles via the indicators on the outside rear view mirrors.
Page 286 4-5. Using the driving support systems Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper The greater the difference in speed between your vehicle and the detected vehicle is, the farther away the vehicle will be detected, causing the outside rear view mirror indicator to illuminate or flash.
Page 287 4-5. Using the driving support systems when driving on the edge of a lane, and the vehicle in an adja- cent lane is far away from your vehicle • When an accessory (such as a bicycle carrier) is installed to the rear of the vehicle •...
Page 288 (if equipped) or multimedia sys- tem (if equipped) screen.  When the Toyota parking The buzzer can alert the driver of faster vehicles approaching from assist monitor (if equipped) is farther away.
Page 289 4-5. Using the driving support systems Example: Approxi- Approach- Speed mate ing vehicle alert dis- tance 18 mph 65 ft. (20 ● Guardrails, walls, signs, parked Fast (28 km/h) vehicles and similar stationary objects 5 mph (8 18 ft. (5.5 Slow ●...
Page 290 4-5. Using the driving support systems driven on the street • When the distance between your vehicle and metal objects, such as a guardrail, wall, sign, or parked vehicle, which may reflect electri- cal waves toward the rear of the vehicle, is short •...
Page 291: Intuitive Parking Assist
Front center sensors system (if equipped) screen Rear corner sensors depending on the position and distance to the object. Rear center sensors  When the Toyota parking Display (Multi-information ■ assist monitor (if equipped) is display) displayed When the sensors detect an...
Page 292 4-5. Using the driving support systems Except panoramic view  A simplified image is displayed on the upper corner of the screen A simplified image is displayed when an obstacle is detected. on the upper corner of the  When the panoramic view screen when an obstacle is monitor (if equipped) is dis- detected.
Page 293 When using steam to clean the sensor receives a strong vehicle, do not direct steam too impact. close to the sensors as doing so may cause a sensor to malfunc- ● A non-genuine Toyota suspen- tion. sion (lowered suspension, etc.) is installed.
Page 294 ● A sensor is covered in any way. may be a sensor malfunction. Have the vehicle inspected by your Toyota ● When a sensor or the area around dealer. a sensor is extremely hot or cold.
Page 295 4-5. Using the driving support systems ● If objects draw too close to the Sensor detection display, sensor. object distance ■ Objects which may not be prop- erly detected Detection range of the sen- ■ The shape of the object may pre- sors vent the sensor from detecting it.
Page 296 4-5. Using the driving support systems  Approximate distance to object • Front center sensor: 3.3 ft. (100 cm) to 2.1 ft. (63 cm) • Rear center sensor: 4.9 ft. (150 cm) to 2.1 ft. (63 cm) Multi-information display Navigation or multimedia system screen ...
Page 297 4-5. Using the driving support systems Buzzer operation and dis- ■ muted by pressing of the meter tance to an object control switches while a suggestion that says mute is available is shown A buzzer sounds when the sen- on the multi-information display. sors are operating.
Page 298: Pksb (Parking Support Brake)
4-5. Using the driving support systems PKSB (Parking Sup- WARNING port Brake) ■ Limitations of the Parking Support Brake system : If equipped Do not overly rely on the system, as doing so may lead to an acci- The Parking Support Brake dent.
Page 299 4-5. Using the driving support systems Display and buzzer for NOTICE hybrid system output ■ If “Parking Support Brake Unavailable” is displayed on restriction control and the multi-information display brake control and the PKSB OFF indicator is flashing If the hybrid system output If this message is displayed restriction control or brake con- immediately after the power...
Page 300 4-5. Using the driving support systems (Hybrid system output restriction Navigation system (if equipped) or multimedia system (if equipped) control: See figure 2.) screen: “BRAKE!” Additionally, if the accelerator Multi-information display: “BRAKE!” pedal continues to be depressed, the brakes will be PKSB OFF indicator: Not illumi- applied automatically to reduce nated...
Page 301 Toyota dealer. ■ If the Parking Support Brake ● A sensor may be frozen. Once the...
Page 302 Initialize the sys- tem. (P.302) If this message continues to be displayed even after initialization, have the vehicle inspected by your Toyota dealer. ■ If a 12-volt battery terminal has been disconnected and recon- nected The system needs to be initialized.
Page 303: Tion (Static Objects)
4-5. Using the driving support systems Parking Support Brake function (static objects) : If equipped If the sensors detect a static object, such as a wall, in the trav- eling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving for- ward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong...
Page 304 4-5. Using the driving support systems When the accelerator pedal is depressed excessively ■ When the vehicle moves in the unintended direction due to ■ the wrong shift position being selected Types of sensors WARNING ■ To ensure the Parking Sup- P.291 port Brake can operate prop- erly...
Page 305 ● When using steam to clean the function. Have the vehicle vehicle, do not direct steam too inspected by your Toyota close to the sensors as doing so dealer. may cause a sensor to malfunc- tion.
Page 306 4-5. Using the driving support systems • The brake pedal is depressed ■ The Parking Support Brake after the vehicle is stopped by function (static object) will brake control. operate when • The static object is no longer 6 to 13 ft.
Page 307 4-5. Using the driving support systems enabled (P.299), the front or rear • When driving on a metal cover sensors detect an object and brake (grating), such as those used for control and hybrid system output drainage ditches restriction control are performed, the •...
Page 308 4-5. Using the driving support systems or lowered due to the carried load or curved curb. • If the orientation of a sensor has • On an extremely bumpy road, on been changed due to a collision or an incline, on gravel, or on grass. other impact •...
Page 309: Parking Support Brake Func- Tion (Rear-Crossing Vehicles)
4-5. Using the driving support systems Parking Support Brake function (rear-crossing vehicles) : If equipped If a rear radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and the system deter- mines that the possibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approaching vehicle.
Page 310 Have the vehi- • A vehicle is no longer approaching cle inspected by your Toyota from the right or left at the rear of dealer. the vehicle. ●...
Page 311 4-5. Using the driving support systems (rear-crossing vehicles) is not ■ Situations in which the system designed to detect the following may operate even though there types of vehicles and/or objects: is no possibility of a collision ● Vehicles approaching from directly In some situations such as the fol- behind lowing, the Parking Support Brake...
Page 312 4-5. Using the driving support systems antenna is installed near a radar sensor ● If the orientation of a radar sensor has been changed ● When multiple vehicles are approaching with only a small gap between each vehicle ● If a vehicle is approaching the rear ●...
Page 313: Rear View Monitor System
4-5. Using the driving support systems Rear view monitor sys- : If equipped The rear view monitor sys- tem assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking.
Page 314 4-5. Using the driving support systems ● In low temperatures, the screen WARNING may darken or the image may ● Never depend on the rear view become faint. The image could monitor system entirely when distort when the vehicle is mov- backing up.
Page 315 4-5. Using the driving support systems This line indicates the estimated vehicle center on the ground. Distance guide line Shows distance behind the vehicle. • Displays a point approximately 1.5 ft. (0.5 m) (red) from the edge of the bumper. Distance guide line Shows distance behind the vehicle.
Page 316 Do not expose the camera to strong impact as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Differences between the screen and the actual road  The distance guide lines and...
Page 317 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 318 4-5. Using the driving support systems When approaching three- dimensional objects The distance guide lines are dis- played according to flat surfaced objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the vehicle width guide lines and distance guide lines.
Page 319 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 320 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 321: Toyota Parking Assist Monitor
4-5. Using the driving support systems Toyota parking assist WARNING monitor ● Never depend on the parking assist monitor entirely when backing up. The image and the : If equipped position of the guide lines dis- The parking assist monitor played on the screen may differ from the actual state.
Page 322 4-5. Using the driving support systems Display mode switching but- WARNING ● In low temperatures, the screen may darken or the image may Each time the button is selected, become faint. The image could the rear view mode and the wide distort when the vehicle is mov- rear view mode are switched.
Page 323 4-5. Using the driving support systems Display mode switching but- Canceling Toyota parking assist monitor Each time the button is selected, The parking assist monitor is the rear view mode and the wide canceled when the shift lever is rear view mode are switched.
Page 324 4-5. Using the driving support systems those who are comfortable with Estimated course line dis- parking the vehicle without the play mode aid of the estimated course lines. Screen description Rear view  Distance guide line display  mode (P.326) Distance guide lines only are Vehicle width guide line displayed.
Page 325 If the steering wheel is straight and the vehicle width guide lines and the estimated course lines are not in alignment, have the vehicle inspected by your Toyota dealer. Parking assist guide line display mode Vehicle width guide line Displays a guide path when the Screen description vehicle is being backed straight up.
Page 326 4-5. Using the driving support systems Wide rear view  Distance guide line dis- play mode Screen description Rear view  Vehicle width guide line Displays a guide path when the vehicle is being backed straight up. • The displayed width is wider than the actual vehicle width.
Page 327 (0.5 m) (red) from the edge of the bumper will not be displayed. the bumper. Wide rear view  Toyota parking assist monitor precautions Area displayed on screen The parking assist monitor dis- plays an image of the view from the bumper of the rear area of the vehicle.
Page 328 Do not expose the camera to strong impact as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Differences between the screen and the actual road  The distance guide lines and...
Page 329 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 330 4-5. Using the driving support systems When approaching three- dimensional objects The estimated course lines tar- get flat surfaced objects (such as the road). It is not possible to determine the position of three- dimensional objects (such as vehicles) using the estimated course lines and distance guide lines.
Page 331 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 332 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 333 If this does not resolve Guide lines are not dis- The back door is open. the symptom, have the played vehicle inspected by your Toyota dealer.  12-volt battery has been reinstalled.  The steering wheel Stop the vehicle, and has been moved while...
Page 334: Panoramic View Monitor
4-5. Using the driving support systems may hit another vehicle or possi- Panoramic view moni- bly cause an accident. Pay attention to the following : If equipped precautions when using the panoramic view monitor. Panoramic view monitor assists the driver in viewing WARNING the surroundings, when ●...
Page 335 4-5. Using the driving support systems WARNING NOTICE ● Do not use the panoramic view ● In panoramic view/moving monitor system in the following view/see-through view, the sys- cases: tem combines images taken from the front, back, left and • On icy or slick road surfaces, or right side cameras into a single in snow image.
Page 336 4-5. Using the driving support systems NOTICE ● People and other three-dimen- sional obstacles may appear differently when displayed on the panoramic view monitor. (These differences include, among others, cases in which displayed objects appear to have fallen over, disappear near image processing areas, appear from image processing areas, or when the actual distance to...
Page 337 4-5. Using the driving support systems Checking the front and When folding the outside around the vehicle rear view mirrors Wide front view & panoramic Wide front view & side views   view Side views  Checking the rear and around the vehicle Rear view &...
Page 338 4-5. Using the driving support systems When the shift lever is in the “P” position Map screen, audio screen, etc. Moving view See-through view When the shift lever is in the “D” or “N” position Map screen, audio screen, etc. Wide front view &...
Page 339 4-5. Using the driving support systems When the shift lever is in the “R” position Rear view & panoramic view Wide rear view Rear view enabled. Checking around the vehicle Screen display The moving view screen and the Moving view ...
Page 340 4-5. Using the driving support systems screen. Select to change the display mode To resume rotation, select between the moving view and the Body color setting switch see-through view. Select to display the body color set- Rotation pause switch ting screen and change the color of Select to pause the rotation of the the vehicle displayed on the pan- screen.
Page 341 4-5. Using the driving support systems Screen display Wide front view & panoramic view  Distance guide lines Shows distance in front of the vehicle. • Display points approximately 3 ft. (1 m) from the edge of the bumper. Intuitive parking assist When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds.
Page 342 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 343 4-5. Using the driving support systems driver in safe driving in situations such as when driving on a narrow road, by allowing them to check the areas around the sides of the vehicle. To display the screen, press the camera switch when the shift lever is in the “D”, or “N”...
Page 344 4-5. Using the driving support systems ● The side views can be displayed even when the outside rear view mirrors are retracted. WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 345 4-5. Using the driving support systems target object.  Ensure that the vehicle width guide line is parallel to the tar- get object.  Pull over to the curb as shown in the illustration above, tak- ing care not to let the vehicle width guide line overlap the Checking the rear and around the vehicle The rear view &...
Page 346 4-5. Using the driving support systems Rear view & panoramic view  Intuitive parking assist When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds. Rear Cross Traffic Alert When a sensor detects an obstacle, the direction of obstacle is displayed and the buzzer sounds.
Page 347 4-5. Using the driving support systems Rear Cross Traffic Alert When a sensor detects an obstacle, the direction of obstacle is displayed and the buzzer sounds. Guide line switching button Select to switch the guide line mode. (P.348) Display mode switching button Each time the display mode switching button is selected, the mode will change between the rear view &...
Page 348 4-5. Using the driving support systems ● The monitor is cancelled when the shift lever is shifted into any position other than the “R” position. ● For details about the intuitive parking assist (P.291), Rear Cross Traffic Alert function (P.288) and Parking Support Brake function. (P.298) ●...
Page 349 4-5. Using the driving support systems • The guide lines move in conjunction with the estimated course lines. • The guide lines display points approximately 1.5 ft. (0.5 m) (red) and approximately 3 ft. (1 m) (yellow) from the center of the edge of the bumper.
Page 350 If the steering wheel is straight and the vehicle width guide lines and the estimated course lines are not in alignment, have the vehicle inspected by your Toyota dealer. ● Do not use the system if the display is incorrect due to an uneven (hilly)
Page 351 4-5. Using the driving support systems width guide lines are within Parking the left and right dividing lines of the parking space. Using the estimated course line When parking in a space which is in the reverse direction to the space described in the proce- dure below, the steering direc- tions will be reversed.
Page 352 4-5. Using the driving support systems Shift the shift lever to the “R” When folding the outside position. rear view mirrors Back up until the parking Even when outside rear view assist guide line meets the mirrors are stored, the monitor edge of the dividing line of can display various images of the parking space.
Page 353 4-5. Using the driving support systems touch the panoramic view dis- WARNING play again. ● When a sensor indicator on the intuitive parking assist display ● The magnifying function is illuminates in red or a buzzer enabled when all of the following sounds continuously, be sure to conditions are met: check the area around the vehi-...
Page 354 4-5. Using the driving support systems Select the desired color. Displays the next page Panoramic view monitor precautions Area displayed on screen Area of image of panoramic view The panoramic view monitor displays an image of the surrounding view of the vehicle. Since the panoramic view processes and displays images based on flat road surfaces, it cannot depict the position of three-dimension objects (such as vehicle bumpers, etc.) that are in positions higher...
Page 355 4-5. Using the driving support systems Parts of objects which extend above a certain height cannot be displayed on the screen. ● As the images obtained from four cameras are processed and displayed on the standard of a flat road surface; the panoramic view/moving view/see through view may be displayed as follows.
Page 356 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 357 4-5. Using the driving support systems Rear view ners of the bumper will not be  displayed. ● Black masking is done for dis- tance detection differences to the front of the vehicle. ● The area covered by the camera is limited.
Page 358 Do not expose the camera to strong impacts as this could cause a malfunction. If this hap- pens, have the vehicle inspected by your Toyota dealer as soon as possible. Difference between the screen and the actual road  The distance guide lines and...
Page 359 4-5. Using the driving support systems may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually.  The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they...
Page 360 4-5. Using the driving support systems When any part of the vehicle sags When any part of the vehicle sags due to the number of pas- sengers or the distribution of the load, there is a margin of error between the guide lines on the screen and the actual dis- tance/course on the road.
Page 361 4-5. Using the driving support systems WARNING ● When a sensor indicator on the intuitive parking assist display illumi- nates in red or a buzzer sounds continuously, be sure to check the area around the vehicle immediately and do not proceed any further until safety has been ensured, otherwise an unexpected accident may occur.
Page 362 4-5. Using the driving support systems Visually check the surroundings Estimated course line and the area behind the vehicle. Three-dimensional objects In the case shown below, the (such as the overhang of a wall truck appears to be outside of or loading platform of a truck) in the estimated course lines and high positions may not be pro-...
Page 363 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
Page 364 4-5. Using the driving support systems Symptom Likely cause Solution  The vehicle is in a dark area  The temperature around the lens is Back up while visually either high or low checking the vehicle’s  The outside tempera- surroundings.
Page 365 If this does not resolve Guide lines are not dis- The back door is open. the symptom, have the played vehicle inspected by your Toyota dealer.  12-volt battery has been reinstalled.  The steering wheel has been moved while the 12-volt battery was being reinstalled.
Page 366: Driving Mode Select Switch
4-5. Using the driving support systems Suitable for normal driving. Driving mode select The driving mode returns to normal switch mode if the switch is pressed while in Eco drive mode or sport mode. The driving modes can be Sport mode selected to suit the driving Controls the steering feeling and and usage conditions.
Page 367: Trail Mode
4-5. Using the driving support systems power switch is turned off. Trail Mode ● Normal mode and Eco drive mode are not canceled until another driving mode is selected. (Even if Trail Mode is a system that the power switch is turned off, nor- performs integrated control mal mode and Eco drive mode will for the AWD, brake and...
Page 368 ● Operating noise may be heard from the engine compartment ■ When an inspection at your Toyota dealer is necessary In the following situations, the sys- tem may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.
Page 369: Driving Assist Systems
4-5. Using the driving support systems VSC (Vehicle Stability Con- ■ Driving assist systems trol) Helps the driver to control skid- To keep driving safety and ding when swerving suddenly or performance, the following turning on slippery road sur- systems operate automati- faces.
Page 370 4-5. Using the driving support systems Active Cornering Assist ■ (ACA) Helps to prevent the vehicle from drifting to the outer side by performing inner wheel brake control when attempting to accelerate during cornering ■ Disabling the TRAC system Hill-start assist control ■...
Page 371 TRAC is temporary deactivated. If ■ ECB operating sound the information continues to show, contact your Toyota dealer. ECB operating sound may be heard in the following cases, but it does ■ Operating conditions of hill-...
Page 372 4-5. Using the driving support systems operated, operation sounds and ● The system determines that the vibrations may be generated from vehicle is drifting to the outer side the brake system, but this is not a when attempting to accelerate malfunction.
Page 373 Toyota dealer immedi- ately. “AWD System Malfunc- A malfunction occurred in the AWD system. tion 2WD Mode  Have your vehicle checked by your Toyota Engaged Visit Your dealer immediately. Dealer” ● The vehicle hydroplanes while...
Page 374 4-5. Using the driving support systems ■ Hill-start assist control does WARNING not operate effectively when ■ Stopping distance when the ● Do not overly rely on hill-start ABS is operating may exceed assist control. Hill-start assist that of normal conditions control may not operate effec- The ABS is not designed to tively on steep inclines and...
Page 375 The ABS, TRAC and VSC/Trailer Sway Control systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for fur- ther information when replacing tires or wheels. ■ Handling of tires and the sus-...
Page 376: 4-6. Driving Tips
4-6. Driving tips but electricity cannot be gener- Hybrid vehicle driving 4-6.Driving tips ated. Also, when using the air tips conditioning system, etc., the hybrid battery (traction battery) For economical and ecolog- power is consumed. ical driving, pay attention to the following points: Accelerator pedal/brake pedal operation...
Page 377 4-6. Driving tips reports before leaving and avoid sume fuel. Also, fuel consump- delays as much as possible. tion can be improved by avoiding overuse of the heater. When driving in a traffic jam, gently release the brake pedal to allow the vehicle to move for- Checking tire inflation ward slightly while avoiding pressure...
Page 378: Winter Driving Tips
WARNING sure warning system) ■ Driving with snow tires Request repairs or replacement of snow tires from your Toyota Observe the following precautions dealer or legitimate tire retailers. to reduce the risk of accidents. This is because the removal and...
Page 379 Accelerate the vehicle slowly, shift lock system. Have the vehi- keep a safe distance between cle inspected by your Toyota you and the vehicle ahead, and dealer immediately. drive at a reduced speed suit- able to road conditions.
Page 380 4-6. Driving tips Always check local regulations WARNING before installing chains. ■ When parking the vehicle When parking the vehicle without ■ Tire chain installation applying the parking brake, make Observe the following precautions sure to chock the wheels. If you when installing and removing do not chock the wheels, the vehi- chains:...
Page 381: Utility Vehicle Precautions
4-6. Driving tips Utility vehicle precau- WARNING tions ■ Utility vehicle precautions Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death, serious injury or damage to utility vehicle class, which your vehicle: has higher ground clear- ●...
Page 382 4-6. Driving tips road, please observe the follow- • State and Local Parks and Recre- ation Departments ing precautions to ensure your • State Motor Vehicle Bureau driving enjoyment and to help • Recreational Vehicle Clubs prevent the closure of areas to •...
Page 383 4-6. Driving tips ■ Inspection after off-road driv- WARNING ● When driving off-road or in rug- ● Sand and mud that has accu- ged terrain, do not drive at mulated around brake discs excessive speeds, jump, make may affect braking efficiency sharp turns, strike objects, etc.
Page 384 4-6. Driving tips...
Page 385: Entune Audio
Entune audio 5-1. Basic function 5-5. Using the audio/visual system Buttons overview..Quick reference ... Menu screen ....Some basics....Status icon ....5-6. Radio operation “Setup” screen .... AM/FM radio....5-2. Basic information before operation Internet radio ....Initial screen ....5-7.
Page 386 Type D: Function achieved free system for cellular by using DCM and a phones) smartphone ....Quick reference... 5-17.Toyota Entune operation Some basics ....Toyota Entune App Suite Connect ..... Placing a call using the 5-18.Entune settings ® Bluetooth hands-free sys- tem ......
Page 387: Basic Function Buttons Overview
When an Apple CarPlay connection is established, press to dis- *1, 2 play the Phone app screen. Press to display the Toyota Entune App Suite Connect screen. (P.507) Turn to change the radio station or skip to the next or previous track/file.
Page 388 5-1. Basic function 428) When an Apple CarPlay connection is established, press to dis- *1, 2 play the Maps app screen. Press to display the audio/visual system screen. (427, 428) Press to display the “Menu” screen. (P.389) Press to display the home screen. (P.396) : For details about Apple CarPlay: P.418 : This function is not made available in some countries or areas.
Page 389: Menu Screen
5-1. Basic function Menu screen Menu screen operation Press the “MENU” button to display the “Menu” screen. Displays the clock. Select to display the clock settings screen. (P.422) Select to display the audio control screen. (P.427) Select to display the hands-free operation screen. (P.468) When an Apple CarPlay connection is established, select to dis- play the Phone app screen.
Page 390: Status Icon
5-1. Basic function : This function is not made avail- Status icon able in some countries or areas. Status icons are displayed ● The number of status icons that can be displayed differs depend- at the top of the screen. ing on the displayed screen.
Page 391 5-1. Basic function While using Data Communi-  ® Bluetooth connection cation Module (DCM) condition display Reception Level Indicators ® An antenna for the Bluetooth Poor connection is built into the instrument panel. Excellent ® The condition of the Bluetooth ®...
Page 392: Setup" Screen
*1, 2 tion settings. (P.414) Press the “MENU” button, then select “Setup” to display the Select to set Toyota Entune “Setup” screen. The items App Suite Connect settings. shown on the “Setup” screen (P.511) can be set. : Vehicles equipped with DCM : This function is not made avail- able in some countries or areas.
Page 393: Initial Screen
5-2. Basic information before operation Initial screen 5-2.Basic information before operation When the power switch is turned to ACC or ON, the initial screen will be dis- played and the system will begin operating. Caution screen After a few seconds, the caution screen will be displayed.
Page 394: Touch Screen
5-2. Basic information before operation Touch screen Touch screen gestures Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use  Touch  Selecting an item Quickly touch and on the screen release once. ...
Page 395 5-2. Basic information before operation Touch screen operation NOTICE ● To prevent damaging the This system is operated screen, lightly touch the screen buttons with your finger. mainly by the buttons on ● Do not use objects other than the screen. (Referred to as your finger to touch the screen.
Page 396: Home Screen
5-2. Basic information before operation ate properly: Home screen • Magnetic isolation cards • Metallic foil, such as the inner On the home screen, multi- packaging of a cigarette box ple screens, such as the audio/visual system screen, • Metallic wallets or bags hands-free screen and clock •...
Page 397: Entering Letters And Numbers/List Screen Operation
5-2. Basic information before operation Entering letters and Customizing the home numbers/list screen screen operation The display information/area on the home screen and the home Entering letters and num- screen layout can be changed. bers Press the “MENU” button. Select “Setup”. When searching by a name or entering data, letters and num- ...
Page 398 5-2. Basic information before operation Input text. Select to change character types. (P.398) Select the desired candidate. Select to make a space on cursor. ● Keyboard layout can be changed. (P.421) Changing character type Select “Change Type”.  To select a candidate that is not displayed, select , and then select the desired predic-...
Page 399 5-2. Basic information before operation Input text. To scroll up/down the list, flick the list up/down. Select to skip to the next or previous page. Select and hold to scroll through the displayed list. Indicates the position of the displayed entries in the entire Select “Search”.
Page 400: Screen Adjustment
5-2. Basic information before operation ton. Screen adjustment Select to turn day mode on/off. (P.400) The contrast and brightness of the screen display and Select to adjust the screen the image of the camera dis- display. (P.400) play can be adjusted. The Select to adjust the camera screen can also be turned display.
Page 401: Linking Multi-Informa- Tion Display And The System
5-2. Basic information before operation  “Display (General)” screen Linking multi-informa- only: Select “<” or “>” to select tion display and the the desired display. system • “Contrast” “+”: Select to strengthen the con- The following functions of trast of the screen. the system are linked with “-”: Select to weaken the contrast of the multi-information dis-...
Page 402: 5-3. Connectivity Settings
5-3. Connectivity settings Press the “MENU” button. Registering/Connect- 5-3.Connectivity settings ® ing a Bluetooth device To use the hands-free sys- tem, it is necessary to regis- ® ter a Bluetooth phone with the system. Once the phone has been Select “Phone”. registered, it is possible to use the hands-free system.
Page 403 5-3. Connectivity settings screen. (P.404) established but registration is not yet complete). ® Register the Bluetooth device using your Blue- ® tooth device.  The system is connecting to the registered device. ®  At this stage, the Bluetooth  For details about operating functions are not yet avail- ®...
Page 404 5-3. Connectivity settings Registering from phone devices. Depending on the ■ ® Select “If you cannot find…”. type of Bluetooth device being connected, a message confirming registration may be displayed on the Blue- ® tooth device’s screen. Respond and operate the ®...
Page 405  SPP (Serial Port Profile) Rec- ommended: Ver. 1.2 Follow the steps in “Register- ® • This is a profile to use the “Toyota ing a Bluetooth phone for the first time” from step 5. Entune” function. (P.402) ...
Page 406: Setting Bluetooth ® Details
® Bluetooth device function may not work properly. ● Refer to http://www.toyota.com/Entune/ in the United States, http://www.toyota.ca/entune in Canada, and http://www.toyotapr.com/entune in Select “Setup”. Puerto Rico, to find approved ®...
Page 407 : Phone on the screen to try again. : Audio player ● It may take time if the device con- : Phone/“Toyota Entune” service nection is carried out during Blue- ® tooth audio playback.  The profile icon for a currently...
Page 408 5-3. Connectivity settings ● Depending on the type of Blue- ® Bluetooth phone available, ® tooth device being connected, it the system will automatically may be necessary to perform ® additional steps on the device. connect to the Bluetooth phone with the highest prior- ®...
Page 409 5-3. Connectivity settings This operation cannot be per- Select the desired device. formed while driving. ® Display the Bluetooth set- tings screen. (P.406) Select “Add New Device”. ® When another Bluetooth  device is connected ®  To disconnect the Bluetooth Select “Yes”...
Page 410 5-3. Connectivity settings Select “Device Info”. ® the Bluetooth phone and cannot be changed. Compatibility profile is unique ® to the Bluetooth device and cannot be changed. Select to reset all setup items. Confirm and change the ® ● If 2 Bluetooth devices have been ®...
Page 411 5-3. Connectivity settings Select the desired connec- Select the desired item to be tion method. set. “Vehicle”: Select to connect the ® Select to set Bluetooth con- audio player from the vehicle’s nection on/off. (P.411) audio/visual system. “Device”: Select to connect the Select to change the auto- vehicle’s audio/visual system from matic connection priority of...
Page 412 5-3. Connectivity settings ® Select the desired Bluetooth Setting automatic connec- device and select “Move Up” tion priority or “Move Down” to change The automatic connection prior- the preferred order. ® ity of the registered Bluetooth devices can be changed. Select “Preferred Device Set- tings”.
Page 413: Wi-Fi Hotspot
Hotspot service sub- scription from Verizon Wire- Select to set the connection less is required. Contact status display of the phone your Toyota dealer for on/off. details. Select to set the connection  This function is not made status display of the audio available in some countries player on/off.
Page 414 5-3. Connectivity settings Operate the device to con- ® Changing the Wi-Fi set- nect it to the vehicle access tings point.  To check the vehicle access Press the “MENU” button. point password, check “Pass- word”. (P.414) ● Hints for connecting to the vehicle ®...
Page 415 (P.415) application has not been Select to display hints for installed, install the application.) connecting to the vehicle via Contact your Toyota dealer for ® Wi-Fi details about the Toyota Entune Select to make the access App Suite Connect application.
Page 416 5-3. Connectivity settings cracked by a third party: ® Selecting a Wi-Fi connec- • Use an 8-character or longer tion channel password consisting of letters and numbers. (Non-ASCII char- Select “Channel”. acters will not be recognized by Check that the following the system.) screen is displayed.
Page 417 5-3. Connectivity settings tion appears on the right upper ® via the Wi-Fi Hotspot will not be possible. side of the screen. (P.390) ® If a Bluetooth device is used ● while a device is connected using Specifications ® the Wi-Fi Hotspot function, the communication speed may ...
Page 418: Apple Carplay
5-3. Connectivity settings  If “Do Not Enable” is selected, Apple CarPlay an Apple CarPlay connection will not be established. In this Apple CarPlay allows some case, the device can be oper- applications, such as Map, ated as a normal Apple Phone, and Music, to be device, such as an iPod.
Page 419 ® • Bluetooth phone regulatory standards. Please note • Toyota Entune App Suite Connect that the use of this product with ● Siri guidance volume level can be iPhone or iPod may affect wire- changed on the voice settings less performance.
Page 420 5-3. Connectivity settings Symptom Solution Check if the device supports Apple CarPlay. Check if Apple CarPlay is enabled on the con- nected device. For details, refer to https://www.apple.com/ios/carplay/. Check if “Apple CarPlay” on the general set- tings screen is set to on. (P.421) An Apple CarPlay connec- Check if the Lightning cable being used is certi- tion cannot be estab-...
Page 421: Other Settings
5-4. Other settings the clock, etc. (P.422) General settings 5-4.Other settings  “Language” Select to change the language. The Settings are available for language setting of Apple CarPlay clock, operation sounds, can only be changed on the con- etc. nected iPhone. ...
Page 422  “Delete Personal Data” Select to delete personal data. (P.423)  “Software Update” Select to update software versions. For details, contact your Toyota dealer. Select to change the time  “Software Update Setting” zone. (P.422) Select to set software update set- Select to set daylight saving ting.
Page 423 5-4. Other settings Adjust the clock manually. Select “Enable This Feature”. Select “+” to set the time for- Manually select linked set- ward one hour and “-” to set tings the time back one hour. Select “Manually Select Select “+” to set the time for- Linked Settings”.
Page 424: Voice Settings
: This function is not made avail- able in some countries or areas. When the automatic update check function is enabled, if a software update is available from the Toyota Entune center, a message will be displayed. Display the general settings Select “Setup”. screen. (P.421) Select “Voice”.
Page 425: Vehicle Settings
5-4. Other settings tion. Vehicle settings The voice command system adapts the user accent. Settings are available for Select to start the voice rec- vehicle customization, etc. ognition tutorial. Select to set the voice Displaying the vehicle prompt interrupt on/off. settings screen Select to reset all setup Press the “MENU”...
Page 426 (4-digit number) standby screen is displayed. ● If the 4-digit personal code is for- gotten, please contact your Toyota dealer. If the valet mode has been activated Enter the 4-digit personal code and select “OK”.
Page 427: Quick Reference
5-5. Using the audio/visual system Quick reference 5-5.Using the audio/visual system Functional overview The audio control screen can be reached by the following methods: From the “AUDIO” button  Press the “AUDIO” button. From the “MENU” button  Press the “MENU” button, then select “Audio”. •...
Page 428: Some Basics
• iPod (Audio Playback) • USB audio/USB video ® • Bluetooth audio • Toyota Entune App Suite Connect : This function is not made avail- able in some countries or areas. “POWER VOLUME” knob: Press to turn the audio/visual Reordering the audio system on and off.
Page 429 5-5. Using the audio/visual system Select the desired audio Select the desired item to be set. source then to reor- der. Select “OK”. USB/AUX port Connect a device. Select to set the tre- ble/mid/bass. (P.429) Select to set the fader/bal- ance.
Page 430 5-5. Using the audio/visual system according to vehicle speed to Select “+” or “-” to adjust mid- compensate for increased road pitched tones. noise, wind noise, or other Select “+” or “-” to adjust low- noises while driving. pitched tones. Select “Automatic Sound Fader/Balance ■...
Page 431 5-5. Using the audio/visual system and vertically.  The voice command system and its list of commands can Contrast and brightness ■ be operated. (P.460) adjustment The contrast and brightness of the screen can be adjusted. Press the “MENU” button. Select “Setup”.
Page 432: 5-6. Radio Operation
5-6. Radio operation AM/FM radio 5-6.Radio operation Control panel Overview The radio operation screen can be reached by the following methods: P.428 Control screen Press to seek for stations in the relevant program type. Press and hold for continu- ous seek. Turn to step up/down fre- quencies.
Page 433 5-6. Radio operation Select and hold “(Add New)”. muted during refresh operation. ● In some situations, it may take some time to update the station list. Radio options Select “Options”. Select the desired item to be set.  When “(Add New)” is selected, a confirmation mes- sage appears.
Page 434: Internet Radio
5-6. Radio operation nal station Internet radio RBDS features are available only when listening to an FM One of Toyota Entune App station that broadcasts RBDS Suite Connect features is information and the “FM Info” the ability to listen to inter- function is on.
Page 435 5-6. Radio operation http://www.toyotapr.com/entune or call 1-877-855-8377 in Puerto Rico.
Page 436: 5-7. Media Operation
5-7. Media operation (P.437) USB memory 5-7.Media operation Select to change the file/track. Overview Select and hold to fast The USB memory operation rewind. screen can be reached by the Select to play/pause. following methods: P.428 Select to change the ...
Page 437 5-7. Media operation sound. Select to display the play ● If tag information exists, the mode selection screen. file/folder names will be changed to track/album names. Select to display the sound setting screen. (P.429) Repeating Select to change the file. Select and hold to fast The file/track or folder/album rewind.
Page 438: Ipod/Iphone
5-7. Media operation iPod/iPhone NOTICE ● Do not leave your portable player in the car. In particular, Overview high temperatures inside the vehicle may damage the porta- The iPod/iPhone operation ble player. screen can be reached by the ● Do not push down on or apply following methods: P.428 unnecessary pressure to the portable player while it is con-...
Page 439 Bluetooth and USB at the same time, system operation may become unstable. For known phone compatibility information, refer to http://www.toyota.com/Entune/. ● Tracks selected by operating a connected iPod/iPhone may not be recognized or displayed prop- Press to change the track.
Page 440 5-7. Media operation properly if a conversion adapter is ● Do not push down on or apply used to connect a device. unnecessary pressure to the portable player while it is con- nected as this may damage the Repeating portable player or its terminal. The track currently being lis- ●...
Page 441: Bluetooth ® Audio
5-7. Media operation ® able in some countries or areas. Bluetooth audio Control screen ® The Bluetooth audio sys- tem enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio/visual system ®...
Page 442 5-7. Media operation selected. Select to change the album. Select Displays cover art ● Each time is selected, the Control panel mode changes as follows: • random (1 album random)  album random (all album random)  off ® ● Depending on the Bluetooth device that is connected to the system, the music may start play-...
Page 443 5-7. Media operation nected on purpose, such as it was ® ● Before using Bluetooth turned off, this does not happen. devices, users of any electrical Reconnect the portable player medical device other than manually. implantable cardiac pacemak- ® ● Bluetooth device information is ers, cardiac resynchronization...
Page 444: Aux
5-7. Media operation Follow the steps in “Register- ® ing a Bluetooth phone for the first time” from step 5. Overview (P.402) The AUX operation screen can Selecting a registered device  be reached by the following ® Display the Bluetooth audio methods: P.428 control screen.
Page 445 5-7. Media operation NOTICE ● Do not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal. ● Do not insert foreign objects into the port as this may damage the portable audio device or its ter- minal.
Page 446: 5-8. Audio/Visual Remote Controls
5-8. Audio/visual remote controls Steering switches 5-8.Audio/visual remote controls , iPod/iPhone, Blue-  ® tooth audio , APPS • Press: Change audio modes Steering switch operation • Press and hold (0.8 sec. or Some parts of the audio/visual more): Pause (Press and hold system can be adjusted using again to resume the play the switches on the steering...
Page 447: Audio Settings
5-9. Audio settings Setup 5-9.Audio settings Common settings Display the audio settings Detailed audio settings can screen. be programmed. P.447 Select “Common”. Displaying the audio set- Select the desired items to tings screen be set. Press the “MENU” button. Select to set the cover art display on/off.
Page 448: Audio/Visual System
5-10. Tips for operating the audio/visual system FM is about 25 miles (40 km). Operating information 5-10.Tips for operating the audio/visual system Once outside this range, you may notice fading and drifting, ● The use of a cellular phone inside which increase with the distance or near the vehicle may cause a from the radio transmitter.
Page 449: Operation
5-10. Tips for operating the audio/visual system Station interference: When a device or its compliance with reflected signal and a signal safety and regulatory stan- dards. Please note that the received directly from a radio station are very nearly the same use of this accessory with an frequency, they can interfere Apple product may affect...
Page 450 5-10. Tips for operating the audio/visual system High-resolution sound Item source Compatible file MP4/AVI/WMV format (video) This device supports high-reso- lution sound sources. Folders in the Maximum device 3000 The definition of high-resolution Files in the Maximum is based on the standards of device 9999 groups such as the CTA (Con-...
Page 451 5-10. Tips for operating the audio/visual system File type Frequency (kHz) Quantization bit File type rate (bit) 8/11.025/12/16/ 22.05/24/32/ WAV (LPCM) ALAC 44.1/48/64/ files 88.2/96 16/24 FLAC 8/11.025/16/ ALAC 22.05/32/44.1/ OGG Vorbis Compatible channel modes : Only compatible with Windows Media Audio Standard File type Channel mode...
Page 452: Operation
5-10. Tips for operating the audio/visual system  When naming an  The player is compatible with MP3/WMA/AAC file, add an VBR (Variable Bit Rate). appropriate file extension  When playing back files (.mp3/.wma/.m4a). recorded as VBR (Variable Bit  This system plays back files Rate) files, the play time will with .mp3/.wma/.m4a file not be correctly displayed if...
Page 453 5-10. Tips for operating the audio/visual system Compatible video format Format Codec Video codec:  H.264/MPEG- 4 AVC  MPEG4 Audio codec:  AAC  The order changes depending  MP3 on the personal computer and MPEG-4 Corresponding MP3/WMA/AAC encoding screen size: software you use.
Page 454 5-10. Tips for operating the audio/visual system ding track-related information Format Codec in an MP3 file. This embed- Video codec: ded information can include  H.264/MPEG- the track number, track title, 4 AVC the artist’s name, the album  MPEG4 title, the music genre, the year ...
Page 455 USB mem- ory. ● If the malfunction is not rectified: Take your vehicle to your Toyota This indicates dealer. that no video “No video files files are included found.” in the USB mem-...
Page 456 5-10. Tips for operating the audio/visual system Certification For vehicles sold in the U.S.A., Hawaii, Guam, Saipan, American  Samoa and Puerto Rico...
Page 457 5-10. Tips for operating the audio/visual system For vehicles sold in Canada ...
Page 458 5-10. Tips for operating the audio/visual system Gracenote ...
Page 459 5-10. Tips for operating the audio/visual system For U.S. owners ...
Page 460: 5-11.Voice Command System
5-11. Voice command system operation Microphone ■ Voice command sys- 5-11.Voice command system operation The voice command sys- tem enables the radio, phone dialing, etc. to be operated using voice com- mands. Refer to the com- mand list for samples of voice commands.
Page 461 5-11. Voice command system operation After hearing a beep, say a NOTICE supported command. ● Do not touch and put a sharp  To display sample commands object to the microphone. It may cause failure. of the desired function, say the desired function or select Voice command system the desired function button.
Page 462 5-11. Voice command system operation voice command operation, screen. (P.424) select “Resume” or press the Press the talk switch. talk switch. Select the desired item to be set. ● If the system does not respond or the confirmation screen does not disappear, press the talk switch and try again.
Page 463: Command List
5-11. Voice command system operation Command list Command Action Returns to top “Start over” Command list overview menu screen Temporarily Recognizable voice commands pauses a voice and their actions are shown session until it is “Pause” below. resumed by pressing the talk ...
Page 464 5-11. Voice command system operation : When an Apple CarPlay connec- Command Action tion is established, this voice Places a call to commands will be unavailable. “Dial <phone the specified While incoming message number>” ■ phone number *1, 2 notification is displayed Places a call to the phone num- Command...
Page 465 Plays the selected track <name>” Command Action Plays tracks Activates the “Play Album “Launch <appli- from the Toyota Entune <name>” selected album App Suite Con- cation name>” nect application Plays tracks “Play Genre from the : When an Apple CarPlay connec- <name>”...
Page 466: Mobile Assistant
5-12. Mobile Assistant operation Mobile Assistant 5-12.Mobile Assistant operation Mobile Assistant opera- tion The Mobile Assistant func- Type A  tion is a voice input assist Press and hold the talk function. Mobile Assist sup- switch on the steering wheel ports the Siri Eyes Free until Mobile Assistant screen Mode and Google App.
Page 467 5-12. Mobile Assistant operation The Mobile Assistant can be Mobile Assistant and phone used only when the following call volumes are synchro- nized. screen is displayed. ● While a phone call is active, the Mobile Assistant cannot be used. ● If using the navigation feature of the cellular phone, ensure the ®...
Page 468: Quick Reference
5-13. Phone operation (Hands-free system for cellular phones) Quick reference 5-13.Phone operation (Hands-free system for cellular phones) Message function The following function can be Phone screen operation used on message function: The phone screen can be ®  Using the Bluetooth phone reached by the following meth- message function (P.479)
Page 469: Some Basics
5-13. Phone operation (Hands-free system for cellular phones) ● When using the hands-free sys- Some basics ® tem or Bluetooth audio and ® Wi-Fi Hotspot functions at the The hands-free system same time, the following problems may occur: enables calls to be made ®...
Page 470 5-13. Phone operation (Hands-free system for cellular phones) ® Connecting a Bluetooth ■ WARNING device ● Your audio unit is fitted with ® Registering an additional Bluetooth antennas. People  with implantable cardiac pace- device makers, cardiac resynchroniza- Display the phone top tion therapy-pacemakers or implantable cardioverter defibril- screen.
Page 471 5-13. Phone operation (Hands-free system for cellular phones) (P.390) talking on the phone. Using the phone switch/microphone Steering switch ■ By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. ●...
Page 472 5-13. Phone operation (Hands-free system for cellular phones) tered when the hands-free sys- Voice command system tem is used. When selling or Press this switch to operate the disposing of the vehicle, initial- voice command system. ize the data. (P.423) ...
Page 473 5-13. Phone operation (Hands-free system for cellular phones) Placing a call using By call history ® the Bluetooth hands- Up to 30 of the latest call history free system items (missed, incoming and outgoing) can be selected. ® After a Bluetooth phone Display the phone top has been registered, a call...
Page 474 5-13. Phone operation (Hands-free system for cellular phones) Select the desired number. as follows: John (2) By favorites list Calls can be made using regis- tered contacts which can be selected from a contact list. (P.474) Display the phone top screen.
Page 475 5-13. Phone operation (Hands-free system for cellular phones) For PBAP compatible Blue- tacts from the connected cel- ■ lular phone. ® tooth phones when “Auto- Transfer the contact data to matic Transfer” is set to off the system using a Blue- (P.486) ®...
Page 476 5-13. Phone operation (Hands-free system for cellular phones) ® Receiving a call using tooth phone being connected, it may be necessary to perform ® the Bluetooth hands- additional steps on the phone. free system By home screen When a call is received, the Display the home screen.
Page 477: Talking On The Bluetooth
5-13. Phone operation (Hands-free system for cellular phones) ® Talking on the Blue- Bluetooth phone, both the sys- ® ® tem and Bluetooth phone may tooth hands-free sys- ring simultaneously when there is an incoming call. (P.484) While talking on the phone, the following screen is dis- played.
Page 478 5-13. Phone operation (Hands-free system for cellular phones) To cancel this function, select ● A continuous tone signal is a char- “Activate”. acter string that consists of num- bers and the characters “p” or “w”. Select to hang up the phone. (e.g.
Page 479: Bluetooth ® Phone Message Function
5-13. Phone operation (Hands-free system for cellular phones) ® current call is placed on hold. Bluetooth phone message function  When there is no current call, but there is a call on hold: “Activate” is displayed. When Received messages can be selected, the system switches forwarded from the con- to the call that was on hold.
Page 480: Function
5-13. Phone operation (Hands-free system for cellular phones) screen. ● Depending on the type of Blue-  Account names are the ® tooth phone used for receiving names of the accounts that messages, or its registration sta- tus with the system, some infor- exist on the currently con- mation may not be displayed.
Page 481: Function
5-13. Phone operation (Hands-free system for cellular phones) SMS case. Select to call the message ● E-mail only: Select “Mark Unread” sender. or “Mark Read” to mark mail unread or read on the message Select to have messages screen. read out. This function is available when To cancel this function, select “Update Message Read Status on...
Page 482: Function
5-13. Phone operation (Hands-free system for cellular phones) Select “OK” when editing is Replying to a message completed. (quick reply) ● To reset the edited quick reply 15 messages have already messages, select “Default”. been stored. Display the message screen. Calling the message (P.479) sender...
Page 483 5-13. Phone operation (Hands-free system for cellular phones) Select the text area.  Identified phone numbers contained in the message are displayed in blue text. Select the desired number. Check that the dialing screen is displayed. ● A series of numbers may be rec- ognized as a phone number.
Page 484: Setup
5-14. Phone settings (P.486) Setup 5-14.Phone settings Message settings (P.492) Displaying the phone set- : This operation cannot be per- tings screen formed while driving. Press the “MENU” button. Sounds settings screen The call and ringtone volume can be adjusted. A ringtone can be selected.
Page 485: Tooth
5-14. Phone settings Select the desired item to be Select to set the desired set. incoming e-mail tone. Select to set the desired incoming SMS/MMS tone. Select “-” or “+” to adjust the incoming SMS/MMS tone volume. Select “-” or “+” to adjust the incoming e-mail tone volume.
Page 486: Tooth
5-14. Phone settings screen. Select the desired item to be set. Select to set the e-mail notifi- cation pop-up on/off. Select to change the incom- ing e-mail display. “Full Screen”: When an e- mail is received, the incoming e-mail display screen is dis- played and can be operated on the screen.
Page 487: Tooth
5-14. Phone settings contact list. (P.490) Select to set automatic con- tact/history transfer on/off. Select to delete contacts When set to on, the phone’s from the contact list. contact data and history are (P.490) automatically transferred. Select to set the voice tags. Select to update contacts (P.491) from the connected phone.
Page 488: Tooth
5-14. Phone settings the phone.  To cancel this function, select “Cancel”. Updating the contacts in a ■ different way (from the call Check that a confirmation screen is displayed when the history screen) operation is complete. Display the phone top When the contact is regis- screen.
Page 489: Tooth
5-14. Phone settings ® phone is removed before down- Bluetooth phone to this sys- loading is complete. tem. Connect a USB device. Registering a new contact (P.429) to the contacts list Select “Transfer Contacts New contact data can be regis- from Device”.
Page 490: Tooth
5-14. Phone settings Registering the contacts in ■ Editing the contact data the favorites list For PBAP compatible Blue- Select “Add Favorite”. ® tooth phones, this function is Select the desired contact to available when “Automatic add to the favorites list. Transfer”...
Page 491 5-14. Phone settings Deleting the contacts in the Select the desired item to be ■ favorites list set. Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Yes” when the confir- mation screen appears. Check that a confirmation screen is displayed when the operation is complete.
Page 492 5-14. Phone settings Deleting the voice tag When set to on, messaging ■ account names used on the Select “Delete”. cellular phone will be dis- Select the desired contact played. and select “Delete”. Select to set adding the vehi- Select “Yes” when the confir- cle signature to outgoing mation screen appears.
Page 493 5-14. Phone settings Enter desired signature with using keyboard. Select “OK”. Select “OK” on the confirma- tion screen, or select “Edit Again” when it needs to amend.
Page 494: 5-15.What To Do If
® Bluetooth device, first firmed on this check the table below. system, check with your Toyota dealer or the fol- Troubleshooting The connected lowing website: device may not http://www. When using the hands-free ■...
Page 495 ® 5-15. What to do if... (Bluetooth Likely cause Solution Likely cause Solution An incorrect Set automatic Enter the correct passcode was Automatic Blue- ® Bluetooth con- passcode on the entered on the ® tooth connec- nection on this cellular phone. cellular phone.
Page 496 (P.487) system, check ® with your Toyota When using the Bluetooth ■ The profile ver- dealer or the fol- message function sion of the con- lowing website: nected cellular Messages cannot be viewed.
Page 497 ® 5-15. What to do if... (Bluetooth tus is displayed at the top of the Likely cause Solution screen each time the power Turn the cellular switch is in ACC or ON. phone off, remove and rein- Likely cause Solution stall the battery To turn off the pack, and then...
Page 498: Toyota Entune
5-16.Toyota Entune overview ● Each function is available in the following areas: Toyota Entune is a service • Toyota Entune App Suite Connect is available in the contiguous that includes Toyota Entune United States, Washington D.C., App Suite Connect, Toyota Alaska, Hawaii, Puerto Rico and Canada.
Page 499: Type A: Function Achieved By Using A Smartphone Or Dcm
• Toyota Entune App Suite Connect enables applicable apps installed on the system to be displayed on and operated from the screen. A few settings must be performed before Toyota Entune App Suite Connect can be used. (P.501) By using a smartphone or DCM Content provider Provides contents to the application server.
Page 500 5-16. Toyota Entune overview Application server Provides applications to the system or a smartphone. Smartphone Using the Toyota Entune App Suite Connect, communication is relayed between the system, application server and contents pro- vider. The smartphone cannot be operated while communicating. Applications Display usable content from the content providers on the screen using the data connection of the connected smartphone or DCM.
Page 501 Puerto Rico. the system. ● These functions are not made In order to use Toyota Entune App available in some countries or Suite Connect, the following must areas. Availability of functions of first be performed: the Toyota Entune App Suite Con- ®...
Page 502: Type B: Function Achieved By Using Dcm And The System
These services are available by subscription on select, telematics hardware-equipped vehicles and supported by the Toyota Entune center, which operates 24 hours a day, 7 days a week. ® For details about Wi-Fi Hotspot:P.413...
Page 503: Type C: Function Achieved By Using Dcm
ANSI Standard The functionality of Safety (C95.1). Connect is made possible ● The design of Toyota Entune sys- by the use of a DCM. tem complies with the FCC guide- lines in addition to those For details, (P.67) standards.
Page 504 5-16. Toyota Entune overview For vehicles sold in the U.S.A., Canada and Puerto Rico ...
Page 505: Type D: Function Achieved By Using Dcm And A Smart- Phone
P.67), download the view of the user when operating Toyota Entune Remote Connect. Toyota Entune Remote Con- In some states, use of Toyota nect app from your smart- Entune Remote Connect may vio- phone’s app store, and late state or local laws. Before...
Page 506 5-16. Toyota Entune overview above approximately -22 °F (-30 °C). This specification is related to the Toyota Entune Remote Con- nect operation, but is dependent on the vehicle’s operating tem- perature range which may be dif- ferent. ● Content is subject to change with- out notice.
Page 507: 5-17.Toyota Entune Operation
5-17. Toyota Entune operation Select “Apps”. Toyota Entune App 5-17.Toyota Entune operation Suite Connect Follow the steps in “From the “APPS” button” from step 3. (P.507) App Suite is a function that enables certain apps From the “APPS” button ...
Page 508 Check that installing is your phone.” started. The Toyota Entune App Suite Con- “Install in Background”: Select to nect application cannot be con- operate other functions while installing.
Page 509: Connect
888-869-6828 in Canada, and by changing to the application 1-877-855-8377 in Puerto screen and pressing the “Install” Rico.” switch. The Toyota Entune App Suite Con-  “Application download error. nect application cannot be con- Please try again later.” ® nected to Bluetooth SPP.
Page 510 5-17. Toyota Entune operation board or voice recognition func- Press the talk switch. tion. For details about the (P.460) functions and services provided Say the desired keyword. by each application, refer to  Completion of the keyword http://www.toyota.com/Entune/ will be detected automatically.
Page 511: 5-18.Entune Settings Toyota Entune App Suite Connect Settings
(P.511) Toyota Entune App 5-18.Entune settings Suite Connect settings Select to detect iPhone app automatically on/off. The settings of Toyota Select to turn on/off the Entune App Suite Connect enhanced USB connection can be changed. mode. • When an iPhone is connected while this setting is “On”, commu-...
Page 512: Connect Settings
5-18. Entune settings Display the Toyota Entune App Suite Connect settings screen. (P.511) Select “Data Usage Mes- sage”. Change the setting as desired.
Page 513: Interior Features
Interior features 6-1. Using the air conditioning system and defogger Automatic air conditioning system....... Heated steering wheel/seat heaters/seat ventilators ........6-2. Using the interior lights Interior lights list ..6-3. Using the storage features List of storage features Luggage compartment fea- tures ......
Page 514: Using The Air Conditioning System And Defogger Automatic Air Conditioning System
6-1. Using the air conditioning system and defogger Automatic air conditioning system 6-1.Using the air conditioning system and defogger Air outlets and fan speed are automatically adjusted accord- ing to the temperature setting. Air conditioning controls Automatic mode switch Left-hand side temperature control knob Right-hand side temperature control knob “SYNC”...
Page 515: System
6-1. Using the air conditioning system and defogger decreases the temperature. The air conditioning system switches between individual and simultaneous modes each time the “SYNC” switch is pressed. Simultaneous mode (the indicator on the “SYNC” switch is on): The driver’s side temperature con- trol dial can be used to adjust the temperature for the driver’s and passenger’s side.
Page 516: System
6-1. Using the air conditioning system and defogger tized such as reducing fan ture, operation in S-FLOW speed, etc. mode may not change as described above. Press the eco air conditioning mode switch. When certain conditions are met and priority is given to the When the eco air conditioning driver’s seat only, the tempera- mode is on, the indicator illumi-...
Page 517: System
6-1. Using the air conditioning system and defogger rear door, switch to automatic S- minates on the rear window FLOW mode. (P.518) defogger and outside rear view mir- ror defoggers switch. Defogging the windshield ■ Defoggers are used to defog the ■...
Page 518: System
6-1. Using the air conditioning system and defogger After only the front passenger side Eco driving mode, the air condi- tioning eco mode will be turned on door is opened and closed, when automatically. Even in this case, the vehicle is driven at 12 mph (20 the air conditioning eco mode can km/h) or more, the system deter- be turned off by pressing the Eco...
Page 519: System
6-1. Using the air conditioning system and defogger operated is maintained. WARNING ■ To prevent the windshield ■ Using automatic mode from fogging up Fan speed is adjusted automati- Do not use the windshield defog- cally according to the temperature ger switch during cool air opera- setting and the ambient conditions.
Page 520: System
6-1. Using the air conditioning system and defogger Rear (if equipped)  Air outlet layout and oper- ations Location of air outlets ■ The air outlets and air volume change according to the selected air flow mode. Direct air flow to the left or right, up or down Open the vent Close the vent...
Page 521: Heated Steering Wheel/Seat Heaters/Seat Ventilators
6-1. Using the air conditioning system and defogger Heated steering NOTICE wheel /seat heat- ■ Humidity sensor /seat ventilators In order to detect fog on the wind- shield, a sensor which monitors the temperature of the windshield, : If equipped the surround humidity, etc.
Page 522: System
6-1. Using the air conditioning system and defogger NOTICE ■ To prevent damage to the seat heaters and seat ventila- tors Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
Page 523: System
6-1. Using the air conditioning system and defogger WARNING ■ Operation condition ■ To prevent causes of over- The power switch is in ON. heating and minor burn inju- ■ Air conditioning system-linked ries control mode Observe the following precautions When a seat ventilator is set to Hi, when using a seat heater: the fan speed of the seat ventilator...
Page 524: Interior Lights List
6-2. Using the interior lights Interior lights list 6-2.Using the interior lights Location of the interior lights Rear interior light (P.525) Front interior lights/personal lights (P.524, 525) Open tray lights (if equipped) Footwell lights (if equipped) Front cup holder lights (if equipped) : These lights turn on when a door is unlocked.
Page 525 6-2. Using the interior lights Turns the door position on ■ Illuminated entry system When a door is opened while the The lights automatically turn on/off door position is on, the lights turn according to the power switch mode, the presence of the elec- tronic key, whether the doors are Turns the lights off locked/unlocked, and whether the...
Page 526 6-2. Using the interior lights NOTICE ■ To prevent 12-volt battery dis- charge Do not leave the lights on longer than necessary when the hybrid system is off.
Page 527: Using The Storage Features
6-3. Using the storage features List of storage features 6-3.Using the storage features Location of the storage features Open tray (P.530) Auxiliary boxes (P.529) Bottle holders (P.529) Console box (P.528) Cup holders (P.528) Glove box (P.527) ● Lighters or spray cans may WARNING explode.
Page 528 6-3. Using the storage features WARNING ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. Cup holders Front  WARNING ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sud- den swerving, an accident may occur due to an occupant being...
Page 529 6-3. Using the storage features WARNING WARNING ■ Items unsuitable for the cup ■ Items unsuitable for the bottle holders holders Do not place anything other than Do not place anything other than cups or beverage cans in the cup a bottle in the bottle holders.
Page 530 6-3. Using the storage features Front of console  WARNING ■ Caution while driving Do not leave the auxiliary box (type A) open while driving. Injuries may result in the event of an accident or sudden braking. ■ Items unsuitable for storing (type A) Do not store items heavier than 0.4 lb.
Page 531: Luggage Compartment Fea- Tures
6-3. Using the storage features Luggage compart- ment features Cargo hooks Raise the hook to use. The cargo hooks are provided for securing loose items. Original position Underside (resin side) Changing the deck board ■ positions WARNING Height of the deck board can be changed by setting the deck ■...
Page 532: Tures
6-3. Using the storage features Pull up the tab to raise the edge into the hole. deck board and move it Fold the deck board and toward you to remove place the rear edge into the holes. WARNING ■ When operating the deck board Do not place anything on the deck board when operating the board.
Page 533: Tures
6-3. Using the storage features Removing the luggage ■ ■ Removing the partition plate cover Release the cover from the left and right anchors and allow it to retract. Disengage the claws Luggage cover (if equipped) Installing the luggage cover ■...
Page 534: Tures
6-3. Using the storage features the deck board. NOTICE ■ To prevent damage to the lug- gage cover Do not place anything on top of the luggage cover. When rolling up the luggage cover, objects may be caught in the cover, damaging the cover and generating noise.
Page 535: Other Interior Features
6-4. Using the other interior features the power switch is turned to OFF, Other interior features 6-4.Using the other interior features the lights will go off automatically after 20 minutes. Sun visors NOTICE ■ To prevent 12-volt battery dis- charge Do not leave the vanity lights on for extended periods while the hybrid system is off.
Page 536 6-4. Using the other interior features the hybrid system may not stop nor- mally. NOTICE ■ When power outlet is not in To avoid damaging the power out- let, close the power outlet lid when the power outlet is not in use.
Page 537 6-4. Using the other interior features the lid. ally be suspended and then start again. This is not a malfunction. NOTICE ■ To prevent damage to the USB charging ports ● Do not insert foreign objects into the ports. ● Do not spill water or other liq- uids into the ports.
Page 538 6-4. Using the other interior features portable devices according to Operation indicator light the Wireless Power Consortium, Charge area such as smartphones and Using the wireless charger mobile batteries, etc., on the ■ charge area. Press the power supply switch of the wireless char- This function cannot be used ger.
Page 539  When the portable device is Vehicle to char- Contact your moved, charging is stopped ger communica- Toyota dealer. for a moment and then it tion failure. restarts. • Repeatedly flashes 3 times Lighting conditions of oper- ■...
Page 540 6-4. Using the other interior features ■ Usable portable devices ger for 2 seconds, the frequency of the charger can be changed and the Qi standard wireless charge stan- noise can be reduced.Also, on that dard can be used on compatible occasion, the operation indicator devices.
Page 541 6-4. Using the other interior features...
Page 542 6-4. Using the other interior features...
Page 543 6-4. Using the other interior features WARNING NOTICE ■ Caution while driving ■ Conditions in which the func- tion may not operate cor- When charging a portable device, rectly for safety reasons, the driver should not operate the main part In the following conditions, it may of the portable device while driv- not operate correctly...
Page 544 NOTICE tioning. Contact authorized Toyota ■ To prevent damage to the dealer. armrest ■ To prevent failure or damage...
Page 545: Garage Door Opener
6-4. Using the other interior features Garage door opener NOTICE ■ To prevent damage to the : If equipped assist grip Do not hang any heavy object or The garage door opener can put a heavy load on the assist be programmed using the grip.
Page 546 6-4. Using the other interior features ® HomeLink indicator light Buttons Vehicles with Digital Rear- is operating.  view Mirror Garage door operation indi- cators ® HomeLink indicator light Illuminates above each button selected. Buttons ■ Codes stored in the Home- ®...
Page 547  ■ When support is necessary ■ When operating or program- Visit on the web at www.home- ® ming HomeLink link.com/toyota or call 1-800-355- Never allow a child to operate or 3515. ® play with the HomeLink buttons. WARNING ®...
Page 548 6-4. Using the other interior features  Garage door opener motors Program a device. manufactured after 1995 may be equipped with rolling code protection. If this is the case, you may need a stepladder or other sturdy, safe device to reach the “Learn”...
Page 549 6-4. Using the other interior features ® door opener motor for details.  HomeLink indicator light illu- minates: Programming of a fixed code device has com- pleted. The garage door or other device should operate ® when a HomeLink button is pressed and released.
Page 550 6-4. Using the other interior features pleted. Press a programmed Home- ® Link button to operate a garage door. Within 1 minute of pressing ® the HomeLink button, after the garage door operation has stopped, press the Enabling 2-way communi- ■...
Page 551 6-4. Using the other interior features Vehicles with Digital Rear-  ■ Before programming view Mirror ● Install a new battery in the trans- mitter. ● The battery side of the transmitter must be pointed away from the ® HomeLink buttons.
Page 552 6-4. Using the other interior features (vehicles with auto anti-glare inside rear view mirror), (vehicles with Digital Rear-view Mirror) simultaneously. The last recorded status will be dis- played for 3 seconds. Erasing the entire Home- ® Link memory (all three codes) Press and hold the 2 outside buttons for 10 seconds until the...
Page 553: Maintenance And Care
Maintenance and care 7-1. Maintenance and care Checking and replacing fuses......Cleaning and protecting the vehicle exterior ..Light bulbs ....Cleaning and protecting the vehicle interior ... 7-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......
Page 554 7-1. Maintenance and care washes may scratch the vehicle Cleaning and protect- 7-1.Maintenance and care surface and harm your vehicle’s ing the vehicle exte- paint. rior ● Rear spoiler may not be washable in some automatic car washes. There may also be an increased Perform the following to risk of damage to vehicle.
Page 555 If this occurs, and cause damage to the wiper consult your Toyota dealer. blades. NOTICE ■ To prevent paint deteriora- tion and corrosion on the body and components (alumi- num wheels, etc.)
Page 556 7-1. Maintenance and care ● Keep the cleaning nozzle at NOTICE least 11.9 in. (30 cm) away from ● To prevent the wheels from cor- the vehicle body. Otherwise roding, remove any dirt and resin section, such as moldings store in a place with low humid- and bumpers, may be deformed ity when storing the wheels.
Page 557: Cleaning And Protecting The Vehicle Interior
7-1. Maintenance and care Cleaning and protect- WARNING ing the vehicle interior ■ Water in the vehicle Do not splash or spill liquid in ● the vehicle, such as on the floor, Perform cleaning in a man- on the rear seats, in the hybrid ner appropriate to each battery (traction battery) air component and its material.
Page 558: Vehicle Interior
7-1. Maintenance and care ■ Water on the floor NOTICE Do not wash the vehicle floor with ■ Cleaning detergents water. Do not use the following types ● Vehicle systems such as the of detergent, as they may dis- audio system may be damaged if color the vehicle interior or water comes into contact with cause streaks or damage to...
Page 559 Allow the leather to dry in a shaded and ventilated area. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Cleaning the synthetic leather areas ...
Page 560: Maintenance Maintenance Requirements
■ Repair and replacement other reproductive harm. Avoid It is recommended that genuine exposure and wash any Toyota parts be used for repairs to affected area immediately. ensure performance of each sys- ● 12-volt battery posts, terminals tem. If non-Toyota parts are used in...
Page 561: General Maintenance
Items Check points self maintenance may affect Is the brake fluid at warranty coverage. Brake fluid the correct level? The use of Toyota Repair Manuals (P.574) is recommended. Is the For details about warranty cover- Engine/power engine/power con- age, refer to the separate “Owner’s...
Page 562 7-2. Maintenance Items Check points Items Check points There should not • Does the brake Exhaust sys- be any fumes or pedal move strange sounds. smoothly? • Does the brake The radiator and pedal have condenser should Radiator/con- appropriate be free from for- Brake pedal denser clearance from...
Page 563 7-2. Maintenance Vehicle exterior Items Check points • Does the park- Items Check points ing brake oper- ate normally? • Do the doors • When parked on Doors operate Parking brake a slope and the smoothly? parking brake is • Does the engine on, is the vehicle Engine hood hood lock system...
Page 564: Emission Inspection And Maintenance (I/M) Programs
I/M test where in the emission control system. Your vehicle may not Contact your Toyota dealer to pass the I/M test and may need prepare the vehicle for re-test- to be repaired. Contact your ing.
Page 565: Do-It-Yourself Maintenance
7-3. Do-it-yourself maintenance Do-it-yourself service 7-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Cool- ant” or a similar If you perform maintenance high quality eth- by yourself, be sure to fol- ylene glycol-based low the correct procedure as non-silicate, non- given in these sections.
Page 566 7-3. Do-it-yourself maintenance Items Parts and tools ■ When working on the engine compartment Hybrid bat- • Vacuum cleaner, ● Make sure that “IGNITION ON” tery (traction on the multi-information display etc, battery) air and the “READY” indicator are • Phillips screw- intake vent both off.
Page 567: Hood
7-3. Do-it-yourself maintenance Hood NOTICE ■ If you remove the air cleaner filter Release the lock from the Driving with the air cleaner filter inside of the vehicle to open removed may cause excessive the hood. engine wear due to dirt in the air. Opening the hood Pull the hood lock release lever.
Page 568 7-3. Do-it-yourself maintenance Hold the hood open by insert- NOTICE ing the supporting rod into ■ When closing the hood the slot. Be sure to return the support rod to its clip before closing the hood. Closing the hood without return- ing the support rod properly could cause the hood to bend.
Page 569: Positioning A Floor Jack
7-3. Do-it-yourself maintenance Rear ■ Positioning a floor jack When using a floor jack, fol- low the instructions in the manual provided with the jack and perform the opera- tion safely. When raising your vehicle with a floor jack, position the jack correctly.
Page 570: Engine Compartment
7-3. Do-it-yourself maintenance Engine compartment Components Fuse box (if equipped) (P.605) Engine oil filler cap (P.571) Engine oil level dipstick (P.570) Brake fluid reservoir (P.574) Radiator (P.573) Electric cooling fan Condenser (P.573) Power control unit coolant reservoir (P.573) Washer fluid tank (P.575) Engine coolant reservoir (P.572) Checking and adding the ■...
Page 571 7-3. Do-it-yourself maintenance check the oil level on the dip- The shape of the dipstick may differ depending on the type of vehicle or stick. engine. Checking the engine oil ■ Wipe the dipstick and reinsert Park the vehicle on level it fully.
Page 572 Engine coolant reservoir ■ manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recy- cling or disposal. ●...
Page 573 If the level is on or below the “LOW” If you cannot find a leak, have your line, add coolant up to the “FULL” Toyota dealer, test the cap and line. (P.664) check for leaks in the cooling sys- tem.
Page 574 7-3. Do-it-yourself maintenance your vehicle inspected by your Adding fluid ■ Toyota dealer. Slide and lift up the rubber strip to partly remove it as WARNING shown. ■ When the hybrid system is Do not touch the radiator or con-...
Page 575 7-3. Do-it-yourself maintenance FMVSS No.116 DOT 3 or SAE J1703 brake fluid Fluid type FMVSS No.116 DOT 4 or SAE J1704 Item Clean funnel ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid WARNING can cause a dangerous loss of brak- ing efficiency.
Page 576: 12-Volt Battery
If the hybrid system will not start even after multiple attempts at all ■ Before recharging methods above, contact your Toyota When recharging, the 12-volt bat- dealer. tery produces hydrogen gas which is flammable and explosive. There-...
Page 577 Keep children away from the a fire or explosion. 12-volt battery. For replacement of the 12-volt ■ Where to safely charge the battery, contact your Toyota 12-volt battery dealer. Always charge the 12-volt battery in an open area. Do not charge NOTICE...
Page 578: Tires
7-3. Do-it-yourself maintenance clamps. Tires Replace or rotate tires in accordance with mainte- nance schedules and tread- wear. Checking tires Check if the treadwear indica- Terminals tors are showing on the tires. Hold-down clamp Also check the tires for uneven wear, such as excessive wear on one side of the tread.
Page 579 All season tires, how- If you are not sure, consult with your Toyota dealer. ever, do not have adequate traction performance compared with snow ■ Tire life tires in heavy or loose snow.
Page 580 Do not mix tires of different makes, models or tread pat- To equalize tire wear and extend terns. tire life, Toyota recommends that Also, do not mix tires of remark- tire rotation is carried out at the ably different treadwear.
Page 581 The illustration used is intended operate properly. as an example, and may differ • If non-genuine Toyota wheels are from the image that is actually used. • A tire has been replaced with a displayed on the multi-informa- tire that is not an OE (Original tion display.
Page 582 7-3. Do-it-yourself maintenance warning valves and transmitters the radio wave conditions. are used. ● When the vehicle is parked, the • If the ID code on the tire pressure time taken for the warning to start warning valves and transmitters is or go off could be extended.
Page 583 Have tire pressure pressure display function warning valve and transmitter ID When new tire pressure warning codes registered by your Toyota valves and transmitters are dealer. installed, new ID codes must be : The country of production is writ-...
Page 584 Adjust the tire inflation pres- ters, contact your Toyota dealer sure to the specified cold tire as the tire pressure warning valves and transmitters may be inflation pressure level.
Page 585 7-3. Do-it-yourself maintenance Press of the meter Press of the meter control switches, select control switches on the steer- “Vehicle Settings” and then ing wheel and select press Press of the meter control switches, select “TPWS” and then press Press of the meter control switches, select the “Set Pressure”.
Page 586 Initial- sure settings are unsuccessful, ization is performed while driving have the vehicle inspected by your at a vehicle speed of approxi- Toyota dealer. mately 25 mph (40 km/h) or more. ● When operating the tire pressure ●...
Page 587 • If, when the vehicle has been ID codes can be registered at driven for about 20 minutes after your Toyota dealer. When 2 sets performing initialization, the tire of ID codes have been regis- pressure warning light blinks for...
Page 588 7-3. Do-it-yourself maintenance Park the vehicle in a safe mation display. place, wait for approximately 20 minutes, and then start the hybrid system. Press of the meter control switches on the steer- ing wheel and select Press of the meter control switches and select Drive the vehicle at approxi- “Vehicle Settings”, and then...
Page 589 ID code registration start If the ID codes cannot be registered procedure again and then turn the even when performing the above power switch off before driving. procedure, contact your Toyota ■ If ID codes are not registered dealer. properly ●...
Page 590: Tire Inflation Pressure
Make sure to maintain the proper tire inflation pres- sure. Tire inflation pressure should be checked at least once per month. However, Toyota recommends that tire inflation pressure be checked once every two weeks. (P.675) Tire valve Checking the specified...
Page 591 ● Uneven wear ● Damage to the drive train If a tire needs frequent inflating, ● Poor handling have it checked by your Toyota dealer. ● Possibility of blowouts resulting from overheated tires ■ Instructions for checking tire inflation pressure ●...
Page 592: Wheels
Replacement wheels are avail- to come off while driving, which able at your Toyota dealer. could lead to an accident result- ing in death or serious injury. : Conventionally referred to as off- set.
Page 593 ■ Use of defective wheels pro- tire chains. hibited  Use only Toyota genuine bal- Do not use cracked or deformed wheels. ance weights or equivalent Doing so could cause the tire to and a plastic or rubber ham-...
Page 594: Air Conditioning Filter
7-3. Do-it-yourself maintenance With the glove box fully open, Air conditioning filter slightly lift up the glove box and pull toward the seat to The air conditioning filter detach the bottom of the must be changed regularly glove box. to maintain air conditioning Do not use excessive force if the efficiency.
Page 595 7-3. Do-it-yourself maintenance Remove the filter case. NOTICE ■ When using the air condition- ing system Make sure that a filter is always installed. Using the air condition- ing system without a filter may cause damage to the system. ■ When removing the glove box Always follow the specified proce- dure to remove the glove box...
Page 596: Hybrid Battery (Traction Bat- Tery) Air Intake Vent And Filter
7-3. Do-it-yourself maintenance Hybrid battery (trac- If dust and clogs cannot tion battery) air intake be completely removed vent and filter If dust and clogs cannot be com- pletely removed with the air To prevent the fuel economy intake vent cover installed, from being affected, visually remove the cover and clean the inspect the hybrid battery...
Page 597 7-3. Do-it-yourself maintenance Install the air intake vent the filter from the cover. cover. Insert the tab of the cover as shown in the illustration and push the cover to engage the 8 claws. Remove the dust and clogs from the filter using a vacuum cleaner, etc.
Page 598 If the warning mes- ● Do not allow water or foreign sage does not disappear, have the matter to enter the air intake vehicle inspected by your Toyota vent when the cover is dealer. removed. Carefully handle the removed ●...
Page 599: Wiper Insert Replacement
7-3. Do-it-yourself maintenance Wiper insert replace- NOTICE ment ■ If “Maintenance Required for Traction Battery Cooling Parts See Owner’s Manual” is When replacing the wiper shown on the multi-informa- insert, perform the following tion display procedure to operate each If the vehicle is continuously driven with the warning message wiper.
Page 600 7-3. Do-it-yourself maintenance driver with a rag. Stopper Claw Remove the 2 metal plates from the wiper insert pulled out, and install the plates to a new wiper insert. Make sure that the cutout location and warp direction of the metal blades are same as the original.
Page 601 7-3. Do-it-yourself maintenance the claw detaches, and then install them to the replace- remove the wiper blade from ment wiper insert. the wiper arm. Insert the wiper insert starting Pull the wiper insert out past from the claw at the center of the stopper on the wiper the wiper blade.
Page 602 Improper handling may result in damage to the wiper blades or wiper insert. If you have any concerns about replacing the wiper blades or wiper insert yourself, contact your Toyota dealer. NOTICE ■ When lifting the windshield wipers ●...
Page 603: Wireless Remote Control/Elec- Tronic Key Battery
Use a CR2032 lithium battery When removing the battery, use a screwdriver of an appropriate size. ● Batteries can be purchased at your Toyota dealer, local electrical Insert a new battery with the “+” ter- appliance shops or camera stores. minal facing up. ●...
Page 604 7-3. Do-it-yourself maintenance cover into the key. the cover damaged. To prevent damage to the key, cover the tip of the flathead screw- driver with a rag. Install the key cover. Align the key cover with the key and then press it straight into the Remove the depleted battery key.
Page 605: Checking And Replacing Fuses
7-3. Do-it-yourself maintenance Checking and replac- WARNING ing fuses ■ Removed battery and other parts These parts are small and if swal- If any of the electrical com- lowed by a child, they can cause ponents do not operate, a choking.
Page 606 7-3. Do-it-yourself maintenance Engine compartment: Type B Remove the cover  fuse box Push claw to com- pletely release the lock, and then lift up the cover. Remove the fuse. Only type A fuse can be removed using the pullout tool. Left side instrument panel ...
Page 607 Do not modify the fuses or fuse boxes. NOTICE ■ Before replacing fuses Have the cause of electrical over- load determined and repaired by your Toyota dealer as soon as possible. Normal fuse ■ To prevent damage to the engine compartment fuse box Blown fuse...
Page 608: Light Bulbs
As there is a dan- ger that components may be damaged, we recom- mend that replacement is Front turn signal lights carried out by your Toyota Fog lights (if equipped) dealer. Front side marker lights Preparing for light bulb...
Page 609 The lights other than the following clockwise. lights each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ● Front turn signal lights ●...
Page 610 7-3. Do-it-yourself maintenance Front turn signal lights Front side marker lights ■ ■ (type B) (type A) Turn the bulb base counter- Turn the bulb base counter- clockwise. clockwise. Remove the light bulb. Remove the light bulb. Install a new light bulb then Install a new light bulb then install the bulb base to the install the bulb base to the...
Page 611 7-3. Do-it-yourself maintenance Front side marker lights Fog lights (if equipped) ■ ■ (type B) To allow enough working Turn the bulb base counter- space, turn the steering clockwise. wheel. Remove the light bulb. Remove the screws. Install a new light bulb then install the bulb base to the light unit by inserting it and turning the bulb base clock-...
Page 612 7-3. Do-it-yourself maintenance Remove the screws and Set the new light bulb. clips, partly remove the Align the 3 tabs on the light bulb fender liner. with the mounting, and insert. Turn it clockwise to set. Set the connector. Shake the bulb base gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking...
Page 613 7-3. Do-it-yourself maintenance Reinstall the fender liner. Remove the securing screws and remove the unit. Remove the lamp assembly by pull- ing it directly backward from the rear of the vehicle. Turn the bulb base counter- clockwise. Reinstall the screws. Remove the light bulb.
Page 614 7-3. Do-it-yourself maintenance turning the bulb base clock- Reinstall the cover. wise. Back-up lights ■ Align the grooves on the light Open the back door and unit with the claws, and insert remove the cover. the light unit straight so that To prevent damage to the cover, the pin on the light unit fit into protect the tip of the screwdriver...
Page 615 7-3. Do-it-yourself maintenance before turning the bulb base. again after installing the bulb base. Remove the light bulb. Reinstall the cover. Install a new light bulb. Outer foot lights (if ■ equipped) Press the upper part of the outside rear view mirror to tilt the mirror face upward, and disconnect the four tabs behind the mirror.
Page 616 7-3. Do-it-yourself maintenance Disconnect the tabs behind not drop the mirror. the mirror cover, and remove the mirror cover. Disconnect the connectors behind the mirror, and remove the mirror. Fold the mirror before remov- ing the light unit. Make sure to check the connectors, to avoid connecting upside down when reinstalling.
Page 617 7-3. Do-it-yourself maintenance Remove the light bulb. not damage the tabs. Install a new light bulb then install the bulb base to the light unit by inserting it and turning the bulb base clock- wise. Secure the cord with the clip back again after installing the bulb base.
Page 618 7-3. Do-it-yourself maintenance 12Reconnect the connectors of install the two screws. the mirror. 13Align the tabs, and secure the mirror by pushing in each diagonally-opposite pair of 10Extend the mirror. tabs in order. Make sure to insert the tabs in order as shown in the illustration, and push them in until a click is heard.
Page 619 7-3. Do-it-yourself maintenance WARNING ■ Replacing light bulb Turn off the light. Do not attempt ● to replace the bulb immediately after turning off the light. The bulb become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands.
Page 620 7-3. Do-it-yourself maintenance...
Page 621 When trouble arises 8-1. Essential information If the vehicle becomes stuck ........Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is trapped in rising water....8-2. Steps to take in an emer- gency If your vehicle needs to be towed......
Page 622: Essential Information
8-1. Essential information the collision.) Emergency flashers 8-1.Essential information The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Operating instructions Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 623: If Your Vehicle Has To Be Stopped In An Emergency
8-1. Essential information If your vehicle has to be stopped in an emer- gency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle Vehicles with smart key sys- using the following proce- ...
Page 624: If The Vehicle Is Trapped In Rising Water
 Remove the seat belt first. ter the windshield as it is lami- nated glass.  If the door can be opened, : Contact your Toyota dealer, or open the door and exit the aftermarket accessory manu- vehicle. facturer for further information ...
Page 625: 8-2. Steps To Take In An Emergency
8-2. Steps to take in an emergency If your vehicle needs 8-2.Steps to take in an emergency ■ When towing the vehicle to be towed Be sure to transport the vehicle with all four wheels raised off the ground. If the vehicle is towed If towing is necessary, we with the tires contacting the ground, the drivetrain or related...
Page 626 The following may indicate a problem with your transmission. ● When raising the vehicle, ensure adequate ground clear- Contact your Toyota dealer or ance for towing at the opposite commercial towing service end of the raised vehicle. With- before towing.
Page 627 8-2. Steps to take in an emergency down at the locations shown in the illustration. Towing with a wheel-lift type truck If you use chains or cables to tie down your vehicle, the angles From the front  shaded in black must be 45°. Use a towing dolly under the Do not overly tighten the tie rear wheels.
Page 628 8-2. Steps to take in an emergency steer and operate the brakes. Insert the towing eyelet into The vehicle’s wheels, drive train, the hole and tighten partially axles, steering and brakes must by hand. be in good condition. Emergency towing proce- dure (vehicles with towing eyelet) To have your vehicle towed by...
Page 629: If You Think Something Is Wrong
Wheel nut wrench is installed in the tool bag. (P.647) lowing symptoms, your vehicle probably needs adjustment or repair. Con- tact your Toyota dealer as soon as possible. Visible symptoms  Fluid leaks under the vehicle (Water dripping from the air conditioning after use is nor- mal.)
Page 630 8-2. Steps to take in an emergency side when braking  Vehicle pulls heavily to one side when driving on a level road  Loss of brake effectiveness, spongy feeling, pedal almost touches the floor...
Page 631: If A Warning Light Turns On Or A Warning Buzzer Sounds
Indicates a malfunction in:  The parking brake system;  The regenerative braking system; or  The electronically controlled brake system (Yellow)  Have the vehicle inspected by your Toyota dealer immediately. Charging system warning light ■ Warning light Details/Actions Indicates a malfunction in the vehicle’s charging...
Page 632  The hybrid system;  The electronic engine control system;  The electronic throttle control system; (U.S.A.)  The emission control system (if equipped); or  The electronic hybrid transmission control system (Canada)  Have the vehicle inspected by your Toyota dealer immediately.
Page 633 Indicates a malfunction in:  The SRS airbag system;  The front passenger occupant classification system; or  The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately. ABS warning light ■ Warning light Details/Actions Indicates a malfunction in: ...
Page 634 Details/Actions When a buzzer sounds simultaneously: Indicates a malfunction has occurred in the PCS (Pre-Collision System).  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: The PCS (Pre-Collision System) has become temporarily unavailable, corrective action may be necessary.
Page 635 Warning light Details/Actions When a buzzer sounds: Indicates a malfunction in the PKSB (Parking Support Brake) system  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: (Flashes) Indicates that the system is temporarily unavail-...
Page 636  Release the accelerator pedal and depress the brake pedal. Indicates a malfunction in the Brake Override System (with warning buzzer)  Have the vehicle inspected by your Toyota dealer immediately. Drive-Start Control Indicates that the shift position was changed and Drive-Start Control was operated while depressing the accelerator pedal.
Page 637 8-2. Steps to take in an emergency Parking brake indicator ■ Warning light Details/Actions It is possible that the parking brake is not fully engaged or released  Operate the parking brake switch once (U.S.A.) again. (Flashes) This light comes on when the parking brake is not released.
Page 638 Details/Actions When the light comes on after blinking for 1 min- ute: Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as (If equipped) ...
Page 639 8-2. Steps to take in an emergency (front), side impact sensors (rear), tire pressure warning system. Have driver’s seat position sensor, the vehicle inspected by your Toyota driver’s seat belt buckle switch, front dealer immediately. passenger occupant classification system (ECU and sensors), “AIR If the tire pressure warning light ...
Page 640 Check the tires. If a tire is shown on the multi-informa- flat, change it with the spare tire and have the flat tire repaired by tion display the nearest Toyota dealer. Check and follow the message shown on the multi-information ● Avoid abrupt maneuvering and display.
Page 641 8-2. Steps to take in an emergency Your vehicle has also been WARNING equipped with a TPMS (tire pres- As an added safety feature, your sure warning system) malfunc- vehicle has been equipped with a tion indicator to indicate when the tire pressure monitoring system system is not operating properly.
Page 642: If A Warning Message Is Displayed
8-2. Steps to take in an emergency shown while the driving assist sys- If a warning message tems such as PCS (Pre-Collision is displayed system) or the dynamic radar cruise control with full-speed range is oper- The multi-information dis- ating. If a warning message is shown, be sure to decelerate the play shows warnings of sys- vehicle or follow an instruction...
Page 643: Played
■ If a message that indicates the ● When the air intake vent or filter is need for visiting your Toyota dirty, clean it by the procedures on dealer is displayed P.596. The system or part shown on the ●...
Page 644: Played
8-2. Steps to take in an emergency accelerator pedal is depressed to maintain the vehicle position when Comes on approximately 5000 stopped on a upward slope, etc. miles (8000 km) after the message If this continues, the hybrid system has been reset. (The indicator will may overheat.
Page 645 P.640 NOTICE ■ “High Power Consumption Partial Limit On AC/Heater Operation” is frequently shown There is a possible malfunction relating to the charging system or the 12-volt battery may be deteri- orating. Have the vehicle inspected by your Toyota dealer.
Page 646: If You Have A Flat Tire
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P.578 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
Page 647 8-2. Steps to take in an emergency Location of the spare tire, jack and tools Jack Tool bag Jack handle Wheel nut wrench Towing eyelet (if equipped) Spare tire ● Only use the tire jack that WARNING comes with this vehicle for ■...
Page 648 8-2. Steps to take in an emergency Take out the jack. WARNING Do not touch the threaded portion ● Put the jack properly in its jack of the jack as it is greased. point. ● Do not put any part of your body under the vehicle while it is sup- ported by the jack.
Page 649 8-2. Steps to take in an emergency Loosen the center fastener Slightly loosen the wheel that secures the spare tire. nuts (one turn). Turn the tire jack portion WARNING by hand until the notch of the ■ When storing the spare tire jack is in contact with the jack Be careful not to catch fingers or point.
Page 650 Toyota When resting the tire on the dealer. ground, place the tire so that the wheel design faces up to avoid •...
Page 651 8-2. Steps to take in an emergency Installing the spare tire wheel ( Remove any dirt or foreign matter from the wheel con- tact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
Page 652 8-2. Steps to take in an emergency USE ONLY” on the tire sidewall. For models made in Japan Use the compact spare tire tempo- rarily, and only in an emergency. ● Make sure to check the tire infla- tion pressure of the compact spare tire.
Page 653 • Panoramic view monitor (if road surfaces. equipped) ■ Driving with tire chains and • Toyota parking assist monitor (if the compact spare tire equipped) Do not fit tire chains to the com- pact spare tire. • Intuitive parking assist (if...
Page 654: If The Hybrid System Will Not Start
Toyota dealer as the Check the following and tire pressure warning valve and perform the appropriate transmitter may be damaged if not procedure: handled correctly.
Page 655: Start
(P.659)  One or both of the 12-volt bat- tery terminals may be discon- nected. (P.577) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Starting the hybrid sys- tem in an emergency...
Page 656: If You Lose Your Keys
If you lose your keys If the fuel filler door cannot be opened New genuine keys can be made by your Toyota dealer If the fuel filler door opener using the other key and the switch cannot be operated, key number stamped on contact your Toyota dealer your key number plate.
Page 657: If The Electronic Key Does Not Operate Properly (Vehicles With Smart Key System)
■ In case of a smart key system malfunction, or other key related problems Take your vehicle with all the elec- tronic keys provided with your vehicle to your Toyota dealer. Locking and unlocking the doors Use the mechanical key...
Page 658 When the smart key system is moon roof or panoramic moon deactivated in customization set- ting, the power switch will turn to roof (turn and hold) ACC. : If equipped : These settings must be custom- ized at your Toyota dealer.
Page 659: If The 12-Volt Battery Is Discharged
12-volt battery is dis- In the event that the hybrid system charged. still cannot be started, contact your You can also call your Toy- Toyota dealer. ota dealer or a qualified repair shop. ■ Stopping the hybrid system Shift the shift lever to P and press...
Page 660 8-2. Steps to take in an emergency Open the exclusive jump up the cover. starting terminal cover. Connect a positive jumper cable clamp to on your vehicle and connect the clamp on the other end of the positive cable to the second vehicle.
Page 661 When recharging or replacing the 12-volt battery (vehicles have the vehicle inspected at with smart key system) your Toyota dealer as soon as ● In some cases, it may not be pos- possible. sible to unlock the doors using the smart key system when the 12- volt battery is discharged.
Page 662 Use a battery that the case size is same as the previous one (LN1), 20 For details, consult your Toyota hours rate capacity (20HR) is equiv- dealer. alent (45Ah) or greater, and perfor- mance rating (CCA) is equivalent (285A) or greater.
Page 663 Have the 12-volt battery inspected at your Toyota dealer ● Do not allow the + and - clamps as soon as possible. of the jumper cables to come If the 12-volt battery is deteriorat- into contact with each other.
Page 664: If Your Vehicle Overheats
8-2. Steps to take in an emergency If your vehicle over- NOTICE heats ■ When handling jumper cables When connecting the jumper cables, ensure that they do not The following may indicate become entangled in the cooling that your vehicle is over- fan or belt, etc.
Page 665 (radiator) for any leaks. If a large amount of coolant leaks, immediately contact your Toyota dealer. Start the hybrid system and turn the air conditioning sys- tem on to check that the radi-...
Page 666 Water can be used in an emer- ator) for any leaks. gency if power control unit coolant is unavailable. If a large amount of coolant leaks, immediately contact your Toyota dealer. After stopping the hybrid sys- tem and waiting for 5 minutes Radiator...
Page 667 8-2. Steps to take in an emergency ota dealer. ■ To prevent damage to the cooling system WARNING Observe the following precau- When inspecting under the ■ tions: hood of your vehicle ● Avoid contaminating the coolant Observe the following precau- with foreign matter (such as tions.
Page 668: If The Vehicle Becomes Stuck
8-2. Steps to take in an emergency If the vehicle becomes WARNING stuck ■ When attempting to free a stuck vehicle If you choose to push the vehicle Carry out the following pro- back and forth to free it, make cedures if the tires spin or sure the surrounding area is clear the vehicle becomes stuck...
Page 669: Vehicle Specifications
Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 9-2. Customization Customizable features 9-3. Initialization Items to initialize ..
Page 670: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
The vehicle identification num- ber (VIN) is the legal identifier for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- tering the ownership of your vehicle. On some models, this number is...
Page 671 9-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. This number is also on the Certi- fication Regulation Label. Engine Model 2.5 L 4-cylinder (A25A-FXS) Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.44 ...
Page 672 Engine oil selection viscosity. ■ “Toyota Genuine Motor Oil” is Oil grade: used in your Toyota vehicle. Use API SN/RC multigrade engine Toyota approved “Toyota Genu- ine Motor Oil” or equivalent to Recommended viscosity: satisfy the following grade and...
Page 673  Similar high-quality ethylene gly- colbased non-silicate, non-amine, Coolant type non-nitrite, and non-borate cool- ant with long-life hybrid organic acid technology Do not use plain water alone. : The coolant capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer.
Page 674 If replacement is necessary, contact your Toyota dealer. NOTICE ■ Hybrid transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may ulti- mately damage the hybrid transmission of your vehicle. Rear differential (rear electric motor) 1.8 qt. (1.7 L, 1.5 Imp.qt.)
Page 675 If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle. Brakes 4.9 in.
Page 676 9-1. Specifications Vehicles with 17-inch wheels (type B)  225/65R17 102H, T165/80D17 104M Tire size (spare) Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear (Recommended cold tire infla- 33 psi (230 kPa, 2.3 kgf/cm or bar) tion pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm...
Page 677 9-1. Specifications Vehicles with 18-inch wheels  225/60R18 100H, T165/80D17 104M Tire size (spare) Front: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear: (Recommended cold tire infla- 33 psi (230 kPa, 2.3 kgf/cm or bar) tion pressure) Spare: 60 psi (420 kPa, 4.2 kgf/cm or bar)
Page 678 9-1. Specifications Light bulbs Light bulbs Bulb No. Type Front side marker lights  Fog lights Front turn signal/parking lights 7444NA 28/8 (type A: P.608) Exterior Front turn signal lights (type B: 7444NA 28/8 P.608) Rear turn signal lights WY21W Back-up lights W16W ...
Page 679: Fuel Information
Some gasoline contains an octane line. For more information on Top enhancing additive called MMT Tier Detergent Gasoline and a list (Methylcyclopentadienyl Manga- of marketers, please go to the offi- nese Tricarbonyl). cial website www.toptiergas.com. Toyota does not recommend the use...
Page 680 The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service. ■ If your engine knocks Consult your Toyota dealer.
Page 681: Tire Information
9-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  Tire size (P.683) DOT and Tire Identification Number (TIN) (P.682) Location of treadwear indicators (P.578) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 682 9-1. Specifications Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
Page 683 9-1. Specifications Type B (P = Passenger car,  T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 dig- DOT symbol its) Tire Identification Number...
Page 684 Your Toyota dealer will help answer and concrete. any questions you may have as you read this information. A tire marked C may have poor DOT quality grades ■...
Page 685 9-1. Specifications Temperature A, B, C performance which all passenger ■ car tires must meet under the Fed- The temperature grades are A eral Motor Vehicle Safety Standard (the highest), B, and C, repre- No. 109. senting the tire’s resistance to Grades B and A represent higher the generation of heat and its levels of performance on the labo-...
Page 686 9-1. Specifications Tire related term Meaning The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occupants Normal occupant weight specified in the second column of Table 1 that follows Distribution of occupants in a vehicle as speci-...
Page 687 9-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 688 9-1. Specifications Tire related term Meaning (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other Intended outboard side- sidewall of the tire, or wall (b)The outward facing sidewall of an asymmetri- cal tire that has a particular side that must...
Page 689 9-1. Specifications Tire related term Meaning A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that Radial ply tire extend to the beads are laid at substantially 90...
Page 690 9-1. Specifications Tire related term Meaning The projections within the principal grooves Treadwear indicators designed to give a visual indication of the (TWI) degrees of wear of the tread The fixture used to hold the wheel and tire Wheel-holding fixture assembly securely during testing : Table 1 ...
Page 691: Customization
Toyota ting screen. dealer. The method of performing detailed Some function settings are setting differs for each screen. changed simultaneously with Please refer to the advice sentence displayed on the screen.
Page 692 Customizable Features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Vehicles with navigation system or multimedia system: Settings that can be changed using the navigation system or multimedia sys-...
Page 693 9-2. Customization Customized Default setting Function setting Audio system linked display – – Energy monitor – – AWD system display – – Drive information type Trip Total – – Average Drive information items (first Speed Distance – – item) Total Time Average Drive information items (sec- Speed...
Page 694 9-2. Customization Customized Function Default setting setting Shift position Automatic door locking func- linked door Speed linked – tion locking opera- door locking tion operation Shift position Driver’s door Automatic door unlocking linked door – linked door function unlocking unlocking operation operation Smart key system...
Page 695 9-2. Customization Customized Function Default setting setting Time elapsed before unlock- ing all the door when gripping 1.5 seconds 2 seconds – – and holding the driver’s door 2.5 seconds handle : If equipped : This setting can be changed when the smart door unlocking setting is set to Driver’s door.
Page 696 9-2. Customization Customized Function Default setting setting One short press switch of the wireless Press and hold – – Push twice remote control operation Operation buzzer volume – – Operation buzzer while the – – back door is operating 1 to 4 Opening angle –...
Page 697 9-2. Customization Power windows, and moon roof or panoramic moon roof ■ (P.176, 179, 182) Customized Function Default setting setting Key linked operation (open) – – Key linked operation (close) – – Wireless remote control – – linked operation (open) Wireless remote control linked operation signal –...
Page 698 9-2. Customization : If equipped Automatic light control system (P.229) ■ Customized Function Default setting setting Light sensor sensitivity Standard –2 to 2 – Time elapsed before head- lights automatically turn off 30 seconds 60 seconds – after doors are closed 90 seconds Windshield wiper linked –...
Page 699 9-2. Customization LTA (Lane Tracing Assist) (P.258) ■ Customized Function Default setting setting Lane centering function – – Steering assist function – – Alert sensitivity Standard High – – Vehicle sway warning func- – – tion Vehicle sway warning sensi- Standard –...
Page 700 9-2. Customization : If equipped BSM (Blind Spot Monitor) (P.281) ■ Customized Function Default setting setting BSM (Blind Spot Monitor) – – Outside rear view mirror indi- Bright – – cator brightness Early Late Alert timing for presence of approaching vehicle (sensi- Intermediate Only when –...
Page 701 9-2. Customization : This setting is linked with the buzzer volume of the RCTA (Rear cross traffic alert) function. PKSB (Parking Support Brake) (P.298) ■ Customized Function Default setting setting PKSB (Parking Support – – Brake) function : If equipped Automatic air conditioning system (P.514) ■...
Page 702 9-2. Customization ■ Vehicle customization ● When the speed linked door locking function and shift position linked door locking function are both on, the door lock operates as follows. • If the vehicle is started with all the doors locked, the speed linked door locking function would not operate.
Page 703: Initialization
• When rotating the tires Tire pressure warning sys- • When changing the tire P.584 • After registering the ID codes Toyota parking assist moni- • After reconnecting or chang- P.331 ing the battery • After changing a fuse *1, 2 P.363...
Page 704 9-3. Initialization...
Page 705: For Owners
For owners 10-1.For owners Reporting safety defects for U.S. owners....Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)......
Page 706: 10-1.For Owners
National Highway Traffic other information about Safety Administration motor vehicle safety from (NHTSA) in addition to noti- http://www.safercar.gov. fying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds...
Page 707: Seat Belt Instructions For Canadian Owners (In French)
10-1. For owners Seat belt instructions Entretien et soin for Canadian owners Manipulation des ceintures ■ (in French) de sécurité Avec un chiffon ou une éponge, The following is a French nettoyez à l’aide d’un savon explanation of seat belt doux et de l’eau tiède.
Page 708: Srs Airbag Instructions For Canadian Owners (In French)
10-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
Page 709 10-1. For owners Coussins gonflables SRS latéraux et en rideau  Coussins gonflables SRS latéraux Peuvent aider à protéger le torse des occupants des sièges avant Coussins gonflables SRS en rideau • Peuvent aider à protéger principalement la tête des occupants des sièges latéraux •...
Page 710 10-1. For owners Contacteur de boucle de ceinture de sécurité du passager avant Capteurs d’impact latéral (arrière) Contacteur de boucle de ceinture de sécurité du conducteur Capteur de position du siège du conducteur Coussin gonflable du conducteur Système de classification de l’occupant du siège du passager avant (ECU et capteurs) Coussin gonflable de protection des genoux Lampe témoin SRS...
Page 711 10-1. For owners • Inclinez légèrement le dossier AVERTISSEMENT du siège. ■ Précautions relatives aux Bien que les véhicules soient coussins gonflables SRS conçus différemment, la plupart des conducteurs peuvent main- Observez les précautions suiva- tenir une distance de 10 in. ntes en ce qui concerne les cous- (250 mm), même si leur siège sins gonflables SRS.
Page 712 être correctement les coussins gonflables SRS retenu à l’aide d’un dispositif de avant considéreront que le con- retenue pour enfants. Toyota ducteur et le passager avant recommande vivement de portent tout de même leur cein- placer et d’attacher correcte- ture de sécurité...
Page 713 10-1. For owners ● Ne fixez et n’appuyez rien sur AVERTISSEMENT des zones telles que la planche ● Ne laissez pas un enfant se de bord, le tampon de volant ou tenir face au coussin gonflable encore la partie inférieure du SRS du passager avant ni tableau de bord.
Page 714 10-1. For owners ● N’utilisez pas d’accessoires AVERTISSEMENT recouvrant les parties du siège ● Véhicules non dotés du sys- où les coussins gonflables SRS tème Smart key : N’accrochez latéraux et le coussin gonflable pas d’objets lourds, pointus ou SRS du coussin de siège se durs, par exemple des clés ou déploient, car ces accessoires des accessoires, à...
Page 715 SRS Ne mettez pas votre véhicule au rebut et n’effectuez aucune des modifications suivantes sans d’abord consulter votre conces- sionnaire Toyota. Les coussins gonflables SRS pourraient fonctionner de manière incor- recte ou se déployer (gonfler) accidentellement, ce qui serait susceptible d’occasionner des...
Page 716 10-1. For owners...
Page 717: Index
Index What to do if... (Trouble- shooting) ....Alphabetical Index ..
Page 718: What To Do If
 Is the child-protector lock set? can be made by your Toyota The rear door cannot be dealer. (P.656) opened from inside the vehi- cle when the lock is set. Open ...
Page 719 What to do if... (Troubleshooting) switch while firmly depress- tem: It is locked automatically to ing the brake pedal? (P.212) prevent theft of the vehicle. (P.213)  Is the shift lever in P? (P.212) The windows do not open or close by operating the ...
Page 720 What to do if... (Troubleshooting) Depending on the situation, place and replace the flat tire with the spare tire. (P.646) other types of warning buzzer may also sound. (P.631, 642) The vehicle becomes stuck An alarm is activated and horn sounds equipped) ...
Page 721: Alphabetical Index
Alphabetical Index Alphabetical Index Side and curtain shield airbags precautions......40 A/C ...........514 SRS airbags ......35 Air conditioning filter.....594 SRS warning light ....633 Automatic air conditioning sys- Air conditioning filter .....594 tem ........514 Air conditioning system..514 Eco air conditioning mode..515 Air conditioning filter .....594 S-FLOW mode .....516 Automatic air conditioning sys- ABS (Anti-lock Brake System)
Page 722 Alphabetical Index Radio settings ......447 ® tooth device ......443 Audio source ......428 ® Bluetooth button (Setup Automatic air conditioning sys- screen)........392 tem.........514 ® Bluetooth details settings ...406 Air conditioning filter.....594 ® Bluetooth setup screen..406 Eco air conditioning mode..515 ® S-FLOW mode .....516 Connecting a Bluetooth device Automatic headlight leveling...
Page 723 Alphabetical Index Break-in tips ......190 Power window lock switch ..178 Brightness control Power window precautions...177 Instrument panel light control94, Rear door child-protectors ..131 Removed key battery precau- BSM (Blind Spot Monitor)..281 tions........605 Blind Spot Monitor function ..285 Seat belt extender precautions Rear Cross Traffic Alert function ..........32 ...........288...
Page 724 Alphabetical Index Defogger Driving position memory ..157 Outside rear view mirrors ..517 Memory recall function ..158 Rear window ......517 Drive-start control ....190 Windshield......517 Driving Digital Rear-view Mirror ..165 Break-in tips ......190 Dimensions ......670 Correct posture.......29 Dinghy towing ......209 Driving mode select switch ...366 Display Hybrid vehicle driving tips..376 BSM (Blind Spot Monitor)..282...
Page 725 Alphabetical Index Electronic sunshade ....182 Warning light......632 Jam protection function ..183 Engine coolant temperature Operation ......182 gauge .........92, 96 Emergency, in case of Engine oil If a warning buzzer sounds ..631 Capacity .......672 If a warning light turns on ..631 Checking ......570 If a warning message is dis- Preparing and checking before...
Page 726 Alphabetical Index Wattage ........678 Fuel gauge......92, 96 Footwell lights ......524 Fuses ........605 Front passenger’s seat belt reminder light .......637 Front passenger occupant clas- Garage door opener ....545 sification system ....45 Gas station information ..740 Front position lights Gauges ........92, 96 Light switch ......229 General button (Setup screen) Front seat heaters ....521...
Page 727 Alphabetical Index Hooks ........210, 212 Cargo hooks......531 Auto power off function..216 Coat hooks ......545 Changing the power switch Retaining hooks (floor mat) ..28 modes......211, 215 Horn .........162 If your vehicle has to be stopped Hybrid battery (traction battery) in an emergency....623 Location........75 Starting the hybrid system ..210, Specification......672...
Page 728 Alphabetical Index Electronic sunshade.....183 Light bulbs Moon roof ......179 Replacing ......608 Panoramic moon roof...183 Wattage ........678 Power back door ....140 Lights Power windows ....176 Automatic High Beam system ...........232 Fog light switch.....235 Front interior lights....524 Keyless entry Headlight switch ....229 Smart key system....147 Interior lights ......524 Wireless remote control ..122...
Page 729 Alphabetical Index Meter control switches ..102 Meter control switches..102 Meters ......92, 96 Navigation system-linked display Multi-information display ..101 ...........106 Settings ......107, 692 PCS (Pre-Collision System) .250 Units ......109, 692 Pop-up display......109 Warning lights....88, 631 Settings ......107, 692 Warning messages..110, 642 Suggestion function ..
Page 730 Alphabetical Index Parking Support Brake function (rear-crossing vehicles) ..309 Panic mode ......123 Parking Support Brake function Panoramic moon roof (static objects) ....303 Jam protection function ..183 Warning light......635 Operation ......182 Warning message....301 Warning message ....184 PCS (Pre-Collision System) Panoramic view monitor..334 Enabling/disabling the pre-colli- Camera switch .....336 sion system ......252...
Page 731 Alphabetical Index Warning message ....301 Radio........432 Placing a call using the Blue- Presetting a station....432 Radio broadcast data system433 ® tooth hands-free system ...473 RCTA (Rear Cross Traffic Alert) By call history .......473 RCTA Function .....281, 288 By contacts list .....474 Warning message....283 By favorites list .....474 Rear Cross Traffic Alert (RCTA)
Page 732 (static objects) ....291 How to wear your seat belt..32 Rain-sensing windshield wipers How your child should wear the ...........237 seat belt........32 RCTA ........284 Pregnant women, proper seat Toyota Safety Sense 2.0 ..244 belt use.........31 Service plug ......75 Reminder light and buzzer .637,...
Page 733 Alphabetical Index Service reminder message..561 Steering switch ....446, 460 Setup button (Menu screen) 389, Audio switch ......446 Talk switch ......460 Setup screen......392 Steering wheel S-FLOW mode ......516 Adjustment ......162 Shift lever ........219 Heated steering wheel..521 If the shift lever cannot be shifted Meter control switches..102 from P.........220 Stop lights...
Page 734 Alphabetical Index LTA switch ......263 free system......477 Meter control switches ..102 Call screen operation ...477 Moon roof switches ....179 Incoming call waiting ....479 Outside rear view mirror Sending tones ......478 switches ......174 Transmit volume setting ..478 Panoramic moon roof switches Theft deterrent system ...........182 Alarm ........83...
Page 735 Toyota Entune......498 Traction motor (electric motor)72 Toyota Entune App Suite Trailer sway control....369 Entering keyword ....509 Trailer towing ......200 Toyota Entune App Suite Con- Trail Mode........367 nect........507 Transmission Toyota Entune App Suite Con- Driving mode select switch ...366 nect settings ......511 Hybrid transmission ....219...
Page 736 Alphabetical Index Vehicle identification number670 Open hood......131 Vehicle proximity notification Open window......177 system........74 PKSB OFF indicator .....635 Vehicle settings ......425 Pre-collision warning ....250 Displaying the vehicle settings RCTA (Rear Cross Traffic Alert) screen ........425 ...........282 Valet mode setting....426 RCTA OFF indicator .....635 Vehicle settings screen ..425 Seat belt reminder ..637, 638 Vehicle Stability Control (VSC)
Page 737 ...413 · Audio system Operating hints.....416 · Rear view monitor system ® Wi-Fi button (Setup screen) 392 · Toyota parking assist monitor ® Wi-Fi Hotspot......413 · Panoramic view monitor Window glasses Power windows ....176 Window lock switch ....178 Windows Power windows ....176...
Page 738 Alphabetical Index...
Page 739 Alphabetical Index...
Page 740 GAS STATION INFORMATION Auxiliary catch lever (P.567) Back door opener switch (P.137) Fuel filler door opener switch (P.242) Fuel filler door (P.242) Tire inflation pressure (P.675) Hood lock release lever (P.567) : Vehicles with power back door Fuel tank capacity 14.5 gal.

Toyota RAV 4 2019 Manual

Driving 4 250

27 For Safety and Security 1

1-1. for Safe Use

Child Safety

Emergency Assistance

1-4. Hybrid System

1-5. Theft Deterrent System

85 Vehicle Status Informa- 2

119 Before Driving 3

Opening, Closing and Locking the Doors Side Doors

Adjusting the Steering Wheel and Mirrors Steering Wheel

Opening, Closing the Win- Dows and Moon Roof Power Windows

Key Information Keys

3-2. Opening, Closing and Locking the Doors

3-3. Adjusting the Seats

3-4. Adjusting the Steering Wheel and Mirrors

187 Driving 4

Operating the Lights and Wipers Headlight Switch

Before Driving Driving the Vehicle

4-1. before Driving

4-2. Driving Procedures

4-3. Operating the Lights and

Refueling

4-5. Using the Driving Support Systems

4-6. Driving Tips

385 Entune Audio 5

Basic Function Buttons Overview

Basic Function

5-3. Connectivity Settings

Other Settings

Using the Audio/Visual

5-6. Radio Operation

5-7. Media Operation

5-8. Audio/Visual Remote Controls

Audio Settings

Audio/Visual System

5-11.Voice Command System

5-12.Mobile Assistant Opera- Tion

5-15.What to Do if

5-17.Toyota Entune Operation

5-18.Entune Settings Toyota Entune App Suite Connect Settings

513 Interior Features 6

Using the Other Interior Features Other Interior Features

Using the Interior Lights Interior Lights List

Using the Air Conditioning System and Defogger Automatic Air Conditioning System

Using the Storage Features

553 Maintenance and Care 7

Maintenance Maintenance Requirements

Do-It-Yourself Maintenance

Hood

Tires

7-1. Maintenance and Care Checking and Replacing

Light Bulbs

621 When Trouble Arises 8

Essential Information

8-2. Steps to Take in an Emergency

Vehicle Specifications

Specifications Maintenance Data (Fuel, Oil Level, Etc.)

Customization

Initialization

For Owners

10-1.For Owners

Index

Quick Links

Chapters

Related Manuals for Toyota RAV 4 2019

Summary of Contents for Toyota RAV 4 2019