Recall Procedure; To Stop The Position Recall Operation Part-Way Through; If The Battery Is Disconnected - Toyota RAV 4 2015 Service Manual

Recall procedure

■
Check that the shift lever is in P.
1
Turn the engine switch to the "ON" position (vehicles without a
2
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
Press one of the buttons for
3
the driving position you want
to recall until the buzzer
sounds.

To stop the position recall operation part-way through

■
Perform any of the following:
Press the "SET" button.
●
Press button "1" or "2".
●
Operate any of the seat adjustment switches.
●
Operating the driving position memory after turning the engine off
■
Recorded seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again.

If the battery is disconnected

■
The memorized positions are erased.
RAV4_OM_OM42A78U_(U)
3-3. Adjusting the seats
I n f o r ma t i o n P r o v i d e d b y :
143
3