Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TMT Automation Boxer 500
Summarization of Contents
Installation
Standard Installation Demonstration
Illustrates the standard setup of the gate opener, including motor, transmitter, and safety sensors.
Device Component Description
Details and labels the various components of the gate opener unit.
Device Dimensions
Provides the physical measurements and dimensions of the gate opener.
Motor Gear and Gear Rack Installation
Explains the process of installing the motor and the associated gear rack.
Installation Checks
Outlines the necessary checks to perform after the gate opener installation.
Emergency Release Procedure
Details the steps for manually releasing the gate opener in case of power failure.
Setup and Function Setting
Wire Connection Diagram
Illustrates the correct wiring connections for the gate opener control board.
Transmitter Memorization
Describes the process for programming remote transmitters to the system.
System Learning and LED Display
Explains the system learning procedure and how to interpret the LED display indicators.
Programmable Function Settings
Details various programmable functions and their settings for the gate opener.
Testing and Checking Procedures
Outlines the steps for testing the gate opener after setup and configuration.
SW2/SW6 DIP Switch Settings
Explains the configuration of DIP switches SW2 and SW6 for system operation.
Technical Characteristics
Boxer Series Technical Data
Provides detailed technical specifications for the Boxer Series gate opener.
H2 Photocell Data Sheet
Specifications and details for the H2 photocell safety sensor.
TM3 Transmitter Data Sheet
Specifications and details for the TM3 remote transmitter.
FL2 Flashing Light Data Sheet
Specifications and details for the FL2 flashing light indicator.
RB1 External Receiver Box Data Sheet
Specifications and details for the RB1 external receiver box.
Additional Information
H2 Photocell (Safety Beam) Wire Connection
Illustrates the wiring connections for the H2 photocell safety beam.
RB1 External Receiver Box Wire Connection & Setting
Details the wiring and setup for the RB1 external receiver box.
Need help?
Do you have a question about the Boxer 500 and is the answer not in the manual?
Questions and answers