Automatic Switch-Off; Measurement And Display Ranges; Battery Charge State Indicator; Power Output Indicator - Derby cycle Focus 2 User Manual

4.1.8 Automatic switch-off

If you stop your Pedelec and it does not move for 10 min-
utes, the system switches off automatically. If you want to
use the assistance again, you will have to switch it back
on via the control panel.

4.1.9 Measurement and display ranges

DESCRIPTION
Speed
Journey length
Average speed
Top speed
Total journey length
DISPLAY RANGE
0.0 – 99.9 km / h
0.0 – 99999 km
(once the distance reaches
9999.9 km, this is dis-
played without a decimal
place.)
0 – 99.9 km / h
0.0 – 99.9 km / h
0.0 – 99999 km
(once the distance reaches
9999.9 km, this is dis-
played without a decimal
place.)

4.1.10 Battery charge state indicator

Battery charge state indicator
This indicator helps you save power when riding which
means you can travel further.
The remaining battery charge is shown in 5 stages.
DISPLAY
5 LEDs light up •••••
4 LEDs light up ••••
3 LEDs light up •••
2 LEDs light up ••
1 LED lights up •
1 LED flashes
¡
no display –
E: Battery is empty
F: Battery is full

4.1.11 Power output indicator

The power output indicator shows the actual power output
being requested and the actual power consumption in 6
stages (bars).
This indicator helps you save power when riding which
means you can travel further.
II User Manual Fast Pedelec
BATTERY CHARGE STATE
80 – 100%
60 – 80%
40 – 60%
20 – 40%
10 – 20%
< 10%
0%
13