Changing The Setting Of The Audio Output Terminals - Yamaha YVC-1000 User Manual

3
Change the volume or tone setting to
suit the type of external microphone
you are using, or your environment.
Change the setting in the drop-down list.
SIGNAL LEVEL:
Set the output level of the external microphone.
Setting
MICROPHONE
LINE
GAIN:
Adjust the sensitivity of the external microphone.
The sensitivity can be set in 3 dB steps between -12
dB (minimum) and +12 dB (maximum).
EQ:
Adjust the tone of the external microphone.
Setting
THRU
LOW CUT
LOW BOOST
37
Select
Description
Sets to the microphone level.
Sets to the line level.
Description
Does not change the tone.
Turns down the low pitch
sound.
Turns up the low pitch sound.
Changing the setting of the audio
output terminals
Change the setting depending on the device connected
to the audio output terminals.
Audio output terminals
■
Adjusting the audio output volume
Sound may crack or become faint on the other side
depending on your environment. In this case, adjust the
audio output volume.
1
In the "YVC-1000 Configurator"
window, select the "AUDIO OUT" tab.
2
Select the volume from the "OUTPUT
VOLUME" drop-down list.
The volume can be set in 3 dB steps between -12 dB
(minimum) and +12 dB (maximum).
Select