Enabling Or Disabling The Bluetooth Function - Yamaha YVC-1000 User Manual

Enabling or disabling the Bluetooth function

When not using a Bluetooth connection, you can disable the Bluetooth function. To use a Bluetooth connection again,
enable the Bluetooth function.
■
Disabling the Bluetooth function
1
When the power is on (the power
button ( ) lights up green), press
and hold the power button (
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button ( ) lights up red.
2
Press the power button (
holding down the Bluetooth button
( ) and the volume - button (
the same time, then release the
power button (
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
( ) and the volume - button (
3
When the Bluetooth function is
disabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button ( ) and the volume - button
( ).
Check whether the Bluetooth button (
) for 2
) while
) at
) only.
).
) is not lit.
■
Enabling the Bluetooth function
1
When the power is on (the power
button ( ) lights up green), press
and hold the power button (
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button ( ) lights up red.
2
Press the power button (
holding down the Bluetooth button
( ), then release the power button
( ) only.
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
( ).
3
When the Bluetooth function is
enabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button ( ).
Check whether the Bluetooth button (
) for 2
) while
) is lit.
32