Using The Yvc-1000 Configurator; Downloading - Yamaha YVC-1000 User Manual

Using the "YVC-1000 Configurator" application allows you to configure various settings for the input and output
terminals that cannot be carried out using buttons on the product.
y
This manual provides a description based on the "YVC-1000 Configurator" screens and the operations on the PC.

Downloading

Download this application from the download page on
our website.
■
Download page
http://www.yamaha.com/products/en/
communication/download/
■
Download file
Download the following file.
"XXX" in the file name indicates the version of
YVC-1000 Configurator.
• For PCs:
YVC-1000_Configurator_XXX.zip
• For Macs:
YVC-1000_Configurator_XXX.dmg
Note
To use "YVC-1000 Configurator", the firmware version of
the product must be 2.00 or later (2.03 or later to change
the USB port setting). The latest firmware version can be
downloaded from the download page shown above.

Using the YVC-1000 Configurator

■
Decompressing the downloaded file
Decompress the downloaded file, and check that the
following files are included in the folder. (For Macs,
disk images are mounted.)
PC/Mac File name and description
PC YVC-1000 Configurator.exe
• Application file
Uninstaller.bat
• Used for uninstallation.
Mac YVC-1000 Configurator.app
• Application file
Uninstaller.app
• Used for uninstallation.
■
Uninstallation
Application information is stored on a PC or a Mac
when "YVC-1000 Configurator" is initially started. To
erase the stored information, perform the uninstallation
procedure shown below.
■
Uninstallation procedure
Double-click the following file in the downloaded
"YVC-1000 Configurator" folder.
• For PCs: Uninstaller.bat
• For Macs: Uninstaller.app
A confirmation message appears. For PCs, press the "y"
key, and then the "Enter" key using the keyboard. For
Macs, click "OK".
34