Yamaha YVC-1000 User Manual page 18

■
Checking whether the connection is made normally
After the connection has been completed, execute the following steps to check that the product is normally recognized
by the Mac.
Note
The items and other options shown in the setting window vary depending on your Mac environment.
1
Press the power button (
the product on.
When the power is turned on, all the buttons light up
green.
2
Click on the upper left of the Mac
screen, and click "System
Preferences".
3
Click "Sound".
The "Sound" window appears.
4
Click the "Output" tab.
17
5
) to turn
y
Normally, "Yamaha YVC-1000" is automatically selected
when the product is connected to the Mac.
6
Click
7
Click
y
Normally, "Yamaha YVC-1000" is automatically selected
when the product is connected to the Mac.
Check that "Yamaha YVC-1000" is
selected in the "Select a device for
sound output:" field.
If "Yamaha YVC-1000" is not selected, click on it.
Click the "Input" tab.
Check that "Yamaha YVC-1000" is
selected in the "Select a device for
sound input:" field.
If "Yamaha YVC-1000" is not selected, click on it.
Check
Click
Check