Table of Contents
Advertisement
Configuring SHORTCUT
Follow the procedure below to select an application to be
started by clicking "Go" in "SHORTCUT".
1
In the PSG-01S Controller screen, click
the Home tab.
2
In "SHORTCUT", select "Select
application".
3
Select the desired application and then
click "Open".
Configuring the shake
function
Follow the procedure below to select a function to be
activated when this unit is shaken.
1
In the PSG-01S Controller screen, click
the General setting tab.
2
In "Shake", select a function to be
assigned.
Open/close PSG-01S Controller:
Select this if you want to open or close the PSG-01S
Controller
Maximize audio level:
Select this if you want to set the volume to the maximum.
OFF:
Select this if you do not use the shake function.
■When shaking this unit
Jiggle this unit up and down to activate the selected
function. Be careful not to remove the USB cable during
shaking.
Switching the USB
bandwidth usage
Follow the procedure below to switch the USB bandwidth
usage. This unit restarts automatically when you change
this setting.
1
In the PSG-01S Controller screen, click
the General setting tab.
2
In "Bandwidth usage", select "Standard
(stereo)" or "Narrow band (monaural)".
If this unit is connected to a PC/Mac conjunction with
other USB devices such as Web camera, this unit may
operate abnormally. In this case, select "Narrow band
(monaural)".
Notes
• While this unit is operating in a narrow band, it plays back
audio in monaural even in "Relax style".
• You cannot switch the USB bandwidth usage during a Skype
call.
• In case that you cannot adjust the speaker volume or
microphone sensitivity after switching the USB bandwidth
usage, disconnect the USB cable and reconnect it.
Uninstalling the PSG-01S
Controller
To uninstall the PSG-01S Controller from the PC, select
[Start] - [All Programs] - [Yamaha PSG-01S] - [Uninstall
PSG-01S Controller].
When you use Windows 7 or Windows Vista, a warning
message regarding uninstallation may appear. Click
"Allow" to continue the uninstallation because Yamaha
has already confirmed the operation.
Note
To uninstall the PSG-01S controller, log on with the user account
used for setup.
Uninstalling the PSG-01S
Controller
To uninstall the PSG-01S Controller from the Mac, select
[Go] - [Applications] from the Finder menu bar and then
drag the "Yamaha PSG-01S" folder to the trash icon.
Note
To uninstall the PSG-01S controller, log on as a user with the
Administrator rights.
11
Advertisement
Table of Contents
