Lid Lock; Control Panel Lcd Model; Control Panel Triple Dispensing Led Model; Control Panel Non Dispensing Led Model - Fisher & Paykel AQUASMART WL37T26CW2 Service Manual

1.24

Lid Lock

Resistance:
Note: Normally low voltage, potentially 110V if harness is grounded on the cabinet!
1.25

Control Panel LCD Model

1.26

Control Panel Triple Dispensing LED Model

1.27

Control Panel Non Dispensing LED Model

1.28

Important Screw / Bolt Torque Settings

Below are the important screw torque settings on the AquaSmart™ washer. These settings must
be adhered to. For all other screws and bolts that are not listed, we recommended that they are
tightened sufficiently without being over-tightened.
Screw / Bolt
Pump hood to cap to outer tub
Rotor bolt to shaft
Pump housing to outer tub
Stator to Outer Tub
o
63Ω +/- 10% @ 68 F (20
o
C)
Torque (in/lbs)
27 in/lbs
70 in/lbs
18 in/lbs
44 in/lbs
10
Torque (Nm)
3Nm
8Nm
2Nm
5Nm
478182