To Clear Jammed Staples In Fn-8 - Minolta CF3102 User Manual

8
6
Insert the staple holder until it locks
into place.
7
Slide the finisher back against the
copier.
H If stapling still cannot be
performed, even after
performing the above
procedure, contact your
technical representative.

To clear jammed staples in FN-8

CAUTION
Stapler unit may be damaged
§
Do not pull out the paper in any other way than described below.
1
Slide the finisher away from the
copier.
2
Open the cover of the horizontal
transport unit.
3
Remove any paper, and then close
the cover of the horizontal transport
unit.
8-18
Troubleshooting
CF2002/CF3102