7
7.2
Replacing the Staple Cartridge
When finisher FN-116 or FN-8 is installed and is about to run out of
staples, a warning message appears.
Note
Be sure to replace the staple cartridge only after the message
appears, otherwise the machine may be damaged.
To replace the staple cartridge for FN-116
1
Slide the finisher away from the
copier.
2
Turn the dial to the left in order to
position the stapler at the center.
3
Pull the staple holder out toward
you.
7-6
Replacing Parts and Supplies
Stapler
CF2002/CF3102