Table of Contents
Advertisement
Control Panel Messages
5
Control Panel Messages
5.1
Message List
When a message appears in the control panel display, refer to the section
for details about the message and the action to be taken.
Note
The display window only displays two lines of a message at one time.
To view messages longer than two lines, press Ä to display the next
line of the message.
Message
Busy
Check power of DT105
Cover open at
xx
Image Stabilizing
Load xx
xx in xx
Load xx
in xx
CF2001P
Cause
The printer is printing.
Power is not being supplied
to the DT105.
The indicated cover is open.
The printer is now image sta-
bilizing.
Paper of size xx and type xx
is not loaded in the specified
tray.
Xx-size paper is not loaded
into the specified tray.
Action
Wait for a while.
Check that power is supplied
to the DT105.
Press Ä once, check which
cover is open, and then close
it.
• Front p. 3-5, #3
• Right Side p. 3-5, #7
• Left Side p. 3-5, #11
• Fusing Unit p. 3-6, #4
• 2nd Feed p. 3-5, #10
• 3nd Feed p. 3-11, #1
• 4th Feed p. 3-11, #1
• LCC Feed p. 3-12, #1
• Duplex p. 3-8, #1
• Horizontal Transport
p. 3-9, #4
• Finisher Front p. 3-10, #4
• Finisher Upper p. 3-10, #1
• Sorter
Correctly attach the sorter to
the printer.
• Finisher
Correctly attach the finisher
to the printer.
No action required.
Load paper of size xx and
type xx into the specified
tray.
Load xx-size paper into the
specified tray.
5
5-1
Advertisement
Table of Contents
