Table of Contents
Advertisement
5
Message
Load xx
OHP in tray1
Load xx
in any tray
Load xx
Thick 1 in tray1
Near trouble ## / ##
No back staples
No front staples
No xxxx toner
Call service
No xxxx toner
Please change
Paper jam at
Jx
Power save mode
Printing stopped
Printing suspended
Replace
Trans. Belt Unit
Service Code
Cxxxx
Sleep mode
The guides in tray #
not set right
5-2
Cause
Xx-size overhead projector
transparencies is not loaded
into tray 1.
Xx-size paper has not been
loaded into any tray.
Xx-size thick 1 is not loaded
into tray 1.
Some malfunction occurred
in the printer.
The back staples have run
out.
The front staples have run
out.
The toner for the indicated
color is empty.
The toner for the indicated
color is empty.
A paper jam or staple jam
occurred at the indicated
location.
The printer has entered
Energy Saver mode.
Paper is loaded into the
manual bypass tray.
A communication error
occurred.
Printing has been stopped.
The service life of the
transfer belt unit has expired.
An error occurred.
The printer has entered
Sleep mode.
The size of the paper loaded
into tray # is incorrect.
Control Panel Messages
Action
Load xx-size overhead pro-
jector transparencies into
tray 1.
Load xx-size paper into any
tray.
Load xx-size thick 1 into
tray 1.
Contact your technical repre-
sentative and inform them of
the error code.
Install new back staples.
Install new front staples.
Ask your technical
representative to refill the
toner for the indicated color.
Refill the toner for the indi-
cated color.
Remove the jammed paper
or the jammed staple. See
page 5-16
• To cancel Energy Saver
mode, send a print job, or
open and close a cover.
• To change the time for the
printer to enter Energy
Saver mode, contact a
technical representative.
Remove all paper from the
manual bypass tray.
No action required
No action required.
Replace the transfer belt
unit.
Contact your technical
representative and inform
them of the error code.
• To cancel Sleep mode,
send a print job, or open
and close a cover.
• To change the time for the
printer to enter Sleep
mode, contact a technical
representative.
Load paper of an appropriate
size into tray #.
CF2001P
Advertisement
Table of Contents
