Host Settings; Reset Defaults - Datamax h-class h-8308p Operator's Manual

Host Settings

Select from the following to change the Host Settings.
Function
Host Timeout
Port Number
Host Name
Hex Transfer

Reset Defaults

The Reset Defaults function allows the user to reset the communications to the default settings.
To reset the communication settings to the factory default settings, select one of the options and select
the green Accept button to make the change.
•
Ethernet
•
Wireless
•
Serial
Adjustments
Adjustments are considered fine adjustments and should not be considered main settings. Select from
the following settings to change the values:
Adjustment Settings
Darkness
Contrast
Vertical Adjust
Horizontal Adjust
Rewinder Tension Adjust
Present Distance Adjust
Cut Distance Adjust
Note: Narrow labels may slip during backup if the head pressure is set too high.
Range
1 to 300 seconds
0 -65535
Any String
True/False
Ranges
-20 to 20
-10 to 10
-100 to 100
-100 to 100
-10 to 10
-100 to 100
-100 to 100
50
Default
1
9100
Printer model number followed by
the last 6 digits of the MAC
address. Ex: p1115_208CB7
False
Default
0
0
0
0
0
0
0