Glass Maintenance - Harman Accentra Owner's Manual

D. Glass Maintenance
The glass used in your stove is manufactured to exact
standards to withstand the high heat of the fire, but like all
glass, it must be treated with common sense and care. Never
abuse the glass by slamming the door shut or striking the
glass with a heavy object. If the glass is broken or damaged,
do not operate the stove until it has been replaced.
Glass - Cleaning
Sometimes it will be necessary to clean accumulated ash
from the glass surface; allowing this ash to remain on the
glass for long periods can result in "etching" due to the acidity
of the ash. Never clean the glass while it is hot, and do not
use abrasive substances. Wash the surface with cool water,
and rinse thoroughly. You may wish to use a non-abrasive
cleaner specifically designed for use on stove glass. In any
case, dry thoroughly before relighting your stove.
Glass - Replacement
If the stove's glass is cracked or broken, you must replace
it before operating your stove. Remove pieces carefully.
Replace glass only with Harman® replacement glass; do
not use substitutes.
Carefully remove damaged glass, gasket material, and hold
down clips (set aside).
Install the self adhesive 1/4"" gasket material around the front
face of the glass. Set the glass panel and gasket gently onto
the door. Install the hold down clips and tighten with bolts.
15 Harman® • Accentra Owner's Manual_R40 • 2002 -___ • 11/15
Glass Clips
3/8" Buttonhead
Ceramic Glass
Screws
and Gasket
3-90-08326c