Table of Contents
Advertisement
Owner's Manual
Press either the ▲ or ▼ button until "BLTOOTH"
2.
appears in the display. press "OK".
3.
"Pair ? Y" will appear in the display. press "OK".
4.
Now the 780D will be in Bluetooth discovery mode,
and will remain so for 30 seconds; "PAIRING..." will
appear in the display window, and the three "." will
flash in sequence.
5.
"MOON 780D..." will appear in the Bluetooth
device list of your smart device and you must select
it. At the same time, the 780D's display window will
show "PAIRED" for several seconds, and then
"BLTOOTH" to indicate successful pairing. The
Bluetooth feature of your smart device must be
enabled for pairing to work. This procedure only
needs to be performed once for each smart device.
6.
When the Bluetooth pairing procedure fails after 30
seconds, "TIMEOUT" will briefly appear in the
display window, followed by "BLTOOTH" after a few
seconds.
7.
To exit the discovery mode prematurely, press the
setup button and "ABORTED" will briefly appear in
the display, followed by "BLTOOTH".
8.
Press the "SETUP" button once to exit u and
"EXITING" will appear briefly in the display window.
Your MOON 780D can automatically switch to the
designated input for your SimLink
CD Player or CD transport when you press its play ►
button; You must first assign the corresponding digital
input on the 780D. The factory default input is D2. To
change the default input from D2 to either D1, D3 or D4,
you must do as follows:
1.
Enter the Setup mode by pressing the "Setup"
button; "SETUP" will appear in the display window.
Press either the ▲ or ▼ button until "MOON CD"
2.
appears in the display. press "OK".
Press either the ▲ or ▼ button until the digital input
3.
you wish to assign to you MOON CD Player or CD
transport appears in the display window. For
TM
connected MOON
example, if you wanted to assign the D3 input for
your MOON CD Player or CD transport then you
would continue scrolling until "CD : D3" appears in
the display. Then press "OK".
4.
Press the "Setup" button once to exit and "EXITING"
will appear in the display window.
You can change the information that appears in the
MOON 780D's display
operation for all inputs. This is referred to here as the
On-Screen Display (OSD):
1.
Enter the Setup mode by pressing the "Setup"
button; "SETUP" will appear in the display window.
Press either the ▲ or ▼ button until "OSD" appears
2.
in the display. Press "OK".
3.
'S. RATE" will appear in the display window. This
option will display the actual input (D1, D2, D3, etc)
along with the sampling rate frequency of the track
that is currently playing. Pressing either the ▲ or ▼
button will reveal the other available OSD option
"IN.LABEL" which will show the actual input along
with the label you previously assigned to each
input in the display window.
4.
Once you have determined your preferred OSD
option, press "OK" and "SAVED" will briefly appear
in the display followed by "OSD".
5.
Press the "SETUP" button to exit from the Setup
menu.
note: When the "In.Label" option is selected, the
sampling rate frequency will be appear in the display
window for 2 seconds when you change the input.
You can invert the phase of the MOON 780D's output
signal by 180 degrees for all inputs as follows:
1.
Enter the Setup mode by pressing the "Setup"
button; "SETUP" will appear in the display window.
Press either the ▲ or ▼ button until "PHASE" appears
2.
in the display. Press "OK".
window
during
normal
11
Advertisement
Table of Contents
