Download  Print this page

Cycle Guide - Kenmore 6012 Use & Care Manual

Hide thumbs

Advertisement

Table of Contents
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTO DRY –
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE:
If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like, select Less next
time you dry a similar load.
Not all cycles and settings are available on all models.
TIMED DRY –
Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
Items to dry:
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
If your dryer has multiple temp settings:
A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a Air Only (no heat) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
6
CYCLE GUIDE – AUTO DRY CYCLES
Dry
Dryness
Temp:
Level:
High Cotton
More
Normal
Less
Medium Casual
More
Normal
Less
Low Delicates
More
Normal
Less
CYCLE GUIDE – TIMED DRY CYCLES
Dry
Cycle:
Temp:
Timed Dry
Any
Touch up
Any
No heat
Air Only
Setting the Drying Temperature
Available
Options:
Cycle Signal
omatic cycles give the best drying in the
Aut
Dry Temp
shortest time. Drying time varies based on
load size, and dryness setting.
Select a drying temperature based on the
Cycle Signal
fabrics in your load. If you are unsure of the
Dry Temp
temperature to select for a load, select the
lower setting rather than the higher setting.
Cycle Signal
Dry Temp
Available
Options:
Dry Temp
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
N/A
This is the last step in a cycle that uses
heat. The load is cooled slowly to reduce
wrinkling and make it easier to handle.
Use this cycle to smooth wear or packing
wrinkles.
Time Adjustment
Use a Air Only (no heat) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
Cycle Details:
Cycle Details:

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Kenmore 6012

This manual is also suitable for:

60222701270222C60222C6024262332 ... Show all