Thread Upper Looper (Green) - Husqvarna Viking Huskylock S25 User Manual

THREAD UPPER LOOPER (GREEN)

• Raise the presser foot to release tension discs.
•
• Thread the top cover thread guide by pulling the thread
towards the right until it slips under the guide. Then pull the
• While holding the thread with both hands, pass it between
the tension discs and pull it down to make certain it is
• Thread the looper area of the machine following the green
• Use the tweezers to thread the hole in the upper looper
•
place it to the back of the stitch plate.
18
2
2
5
9
8
6
7
1
3
4