Thread Your Huskylock - Husqvarna Viking Huskylock S25 User Manual

Thread Middle Coverstitch /
Chainstitch Needle (red)
(
• Raise the presser foot to release tension discs.
•
• Thread the top cover thread guide by pulling the thread
towards the right until it slips under the guide. Then pull
the thread along the right side of the button as illustrated
• While holding the thread with both hands, pass it
between the tension discs and pull it down to make
•
slip the thread into the middle slot on the thread guides
• Before threading the eye of the needle, make sure thread
is in front of thread guide located on the bottom of the
• Thread the eye of the left needle. Use the needle threader
•
hang free.
•
2
3
2
7
8
9
3 – THREAD YOUR HUSKYLOCK™
1
6
4
5
25
S
25