Thread Lower Looper (Blue) - Husqvarna Viking Huskylock S25 User Manual

THREAD LOWER LOOPER (BLUE)

• Raise the presser foot to release tension discs.
•
• Thread the top cover thread guide by pulling the thread
towards the right until it slips under the guide. Then pull
the thread along the right side of the button as illustrated
• While holding the thread with both hands, pass it between
the tension discs and pull it down to make certain it is
• Turn the hand wheel toward you until the looper extends
out 10 mm from the needle plate edge.
• Thread the looper area of the machine following the blue
•
•
• Continue threading through guides 6-8.
•
of thread through guide 8.
Remember to set it back to N before starting to sew.
back to snap the thread into thread guide 9.
2
9
10
8
9
A
B
C
3 – THREAD YOUR HUSKYLOCK™
2
3
5
7
6
1
4
25 19
S