Start Sewing - Husqvarna Viking Huskylock S25 User Manual

START SEWING

Pin Placement
When securing the fabric pieces using pins, insert straight
pins to the left of the presser foot. The pins will be easy to
remove and are away from the cutters.
edge of the cutters.
• When the machine is completely threaded, close the front
cover and bring all of the threads over the stitch plate
and slightly to the left under the presser foot.
• Ensure that the upper blade moves against the lower
blade correctly by turning the handwheel slowly toward
you. If the blades are not moving correctly, check if there
are any fabric or waste thread stuck between the blades.
• Hold the threads and pull them slightly.
• Turn the hand wheel toward you two to three complete
turns to start making a thread chain. Check if all threads
thread is threaded correctly.
• Continue holding the thread chain while pressing the foot
•
a test sample. Guide the fabric slightly with your left
hand while sewing. Do not pull on the fabric as this may
Chain Off
• When you reach the end of the fabric, continue sewing
the left. This is called chaining off. It prevents the threads
from coming undone and prepares for the next sewing
task.
•
foot using the thread cutter on the left side of the
the back, then toward you.
4 – STITCHES & SEWING TECHNIQUES 35