Others Menu - Rotel RDV-1050 Owner's Manual

Hide thumbs Also See for RDV-1050:
Table of Contents

Advertisement

Available languages

Available languages

RDV-1050 DVD Player

OTHERS Menu

RESUME
You can select the resume playback mode. See
the Resuming Playback section for more infor-
mation.
Setting options: ON, OFF, DISC RESUME
ON: when selected, the RDV-1050 can re-
sume playback of the disc from the position
where playback was last interrupted, if the disc
is still in the disc tray.
OFF: when selected, the resume function is
deactivated.
DISC RESUME: when selected, the RDV-1050
can resume playback of the last 30 discs
played. The RDV-1050 retains a memory of
the interrupted positions of the last 30 discs
played, even though they have been removed
from the disc tray.
ON SCREEN GUIDE
The RDV-1050 can display "on-screen guide"
icons or characters on the picture, which show
what is happening to the disc or the RDV-1050.
Example of "on-screen guide" icons:
Setting options: ON, OFF
ON: when selected, the on-screen guide is
activated.
AUTO STANDBY
When the RDV-1050 is stopped for more than
30 minutes or 60 minutes, it enters standby
mode automatically.
Setting options: 60, 30, OFF
PARENTAL LOCK
When this option is selected, pressing ENTER
;
on the remote control unit brings up the
PARENTAL LOCK display shown below. This
allows you to restrict children from playing DVD
Video discs.
See the Parental Lock section for more infor-
mation about the function.
Fine Tuning for Your Speakers
You can fine the outputs of the RDV-1050 to
match your speaker system.
Before you start set ANALOG OUT in the
AUDIO preference display to MULTI CHAN-
NEL and MODE in the SPK.SETTING prefer-
ence display to EXPERT.
Setting the Speaker Size and BASS
REDIRECT Function
e
1 Press CHOICE
. One of the preference
on-screen displays appears on the TV
screen. If necessary press
bring up the SPK.SETTING menu.
jw
2 Press
/
to move
;
press ENTER
. The SIZE display page
appears on the TV screen.
3 Press
/
to select the speaker to be set
and press ENTER.
FRONT SPEAKER: front speakers
CENTER SPEAKER: center speakers
SURROUND SPEAKER: surround (rear) speak-
ers
4 Press
/
to select the size and press
ENTER.
LARGE: large speaker(s) which can fully repro-
duce the low frequency range.
SMALL: small speaker(s) which cannot fully re-
produce the low-frequency range.
NONE: no speaker(s) connected.
5 Repeat steps 3 and 4 if you want to set other
speakers.
When you use the small speakers which do
not fully reproduce the low-frequency range,
you can boost up the low-frequency signal of
the subwoofer or front speakers by setting the
BASS REDIRECT function.
6 Press
/
to select BASS REDIRECT and
press ENTER.
30
7 Press
/
L/R and press ENTER.
SUB WOOFER: The low-frequency signal from
the subwoofer output is boosted.
FRONT L/R: The low-frequency signals from the
front speaker outputs are boosted. There is no signal
from the subwoofer output.
To return to the SPK.SETTING page press /
to move
NOTES: The BASS REDIRECT setting works
only when at least any one of the speaker
sizes is set to SMALL.
qk
/
to
No audio is output from the SUB-
WOOFER jack when FRONT L/R is se-
lected.
to SIZE and
If the front speaker size is set to SMALL,
the BASS REDIRECT setting is automatically
set to SUBWOOFER.
DVD AUDIO discs may not play correctly
depending on the settings of the RDV-1050
or the disc itself.
Setting the Delay Time
Often in multi-channel systems it is not possible
to locate all the speakers at an equal distance
from the listener. The Delay Time setting of the
RDV-1050 can compensate for the differences
in the distance from the front (left, right) speak-
ers, the center speaker and the surround speak-
ers to the listener.
NOTE: This setting can only compensate
for differences in speaker distance when
the front speakers (left, right) are farther
from the listener than the other speakers.
Check the difference in the distance from the
listener to the front speakers (left, right) and
the speakers, and then set that value as de-
scribed in the procedure below.
1 Press CHOICE
on-screen displays appears on the TV
screen. If necessary press
bring up the SPK.SETTING menu.
to select SUB WOOFER or FRONT
to RETURN and press ENTER.
e
. One of the preference
qk
/
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents