Menu Screens; Screen Saver; Front Panel Overview; Power Button And Led - Rotel RDV-1092 Owner's Manual

RDV-1092 DVD Audio/Video Player RDV-1092

Menu Screens

A number of menu screens can appear dur-
ing configuration of the RDV-1092 such as
the sample below:
MENU
DVD playback audio track
system setup camera angle
video setup subtitle
DVD auto play
audio setup
speaker setup subtitle pref.
parental control audio lang. pref.
high def. setup audio fmt. pref.
exit menu
The menu screens provide access to vari-
ous settings and features described in the
Configuration section of this manual. The
menu system appears when the SETUP but-
ton is pressed, typically whether the disc or
stopped or playing.

Screen Saver

To prevent damage to a TV monitor during
prolonged display of a static image, the unit
automatically activates a moving ROTEL logo
screen saver display after several minutes.
The screen saver display is turned off, return-
ing to the previous display, when any front-
panel or remote button is pressed.

Front Panel Overview

The following is a brief overview of the con-
trols and features on the front panel of the
RDV-1092. Details concerning the use of these
controls are provided in subsequent sections
of this manual describing various tasks.

POWER Button and LED

The POWER button serves as a master on/off
switch. In the out position, the unit is completely
powered down and cannot be activated by
the remote. Press the button in to activate the
unit, indicated by the front panel display be-
ing illuminated. With the front panel POWER
button in the on position, the remote control
ON/OFF buttons are used to activate the
unit or put it in standby mode. In standby
mode, the POWER LED remains lit, but the
front panel display is turned off.
: Pressing the OPN/CLOSE or PLAY
NOTE
buttons also turns the unit on when it is in
Standby mode.

LED Indicators

Two front-panel LEDs provide additional infor-
mation during operation of the RDV-1092.
DVD-Audio lights when the disc contains
DVD-Audio programming.
Dolby Digital 2.0
Dolby Digital 5.1
HDMI lights when HDMI or HDMI/DVI cables
up/down to select
are connected to the RDV-1092.
ok to confirm
left or return to go back
with no change

Front-Panel Display

menu for help
A lighted display on the front-panel of the
RDV-1092 provides information about the
status of the unit, activation of special fea-
tures, and track/time information. See the
illustration at the front of this manual for the
location of each section of the display:
Title/Group
current Title or Group.
Chapter/Track
the current Chapter or Track.
Play/Pause
indication.
Status/Disc Type
status of the unit (Open, Close, No Disc,
etc.). When a disc is playing, this section
of the display shows the sampling rate and
format of the disc (DVD-V 48kHz, DVD-A
96kHz, etc.)
Audio Format
mat of the inserted disc (Dolby Digital, DTS,
PCM, etc.)
Remain
remaining time of disc or selection is being
displayed.
Time
disc is playing
Function
tures are activated, A in the first segment for
angle, Z in the second segment for zoom,
and an indicator for the type of repeat in the
fourth segment.
Audio Channel
possible audio channels are in use. 2/0 in-
dicates a stereo signal, 3/2 indicates a five
channels with three front and two surround,
1CH to 6CH for DVD-A discs, etc.
displays the number of the
displays the number of
shows a play or pause
displays the current
displays the audio for-
shows the letter R when the
displays the elapsed time when a
indicates which special fea-
shows which of the six
16 16

Disc Drawer

A motor-driven disc drawer, located in the
center of the RDV-1092, slides out to accept
a disc and retracts for playback.

OPN/CLOSE Button

Press to open or close the Disc Drawer.

Remote Sensor

The remote sensor receives infrared signals
from the remote control. Do not cover or
block the sensor.

PLAY Button

Press the PLAY button to start playing the
disc from the beginning or to resume play if
playback is paused.

STOP Button

Press the STOP button to stop disc play-
back.

PAUSE Button

Press the PAUSE button to temporarily sus-
pend play or to advance the still picture frame
by frame when playback is paused.

TRACK Buttons

The TRACK
back to the beginning of the next selection.

SEARCH Buttons

Press the SEARCH
variable high-speed play, either forward or
reverse, at 2X, 4X, 8X, 16X, 30X, or 60X
normal speed.
buttons skip forward or
buttons to begin