Configuring For Raid Using The Intel ® Matrix Storage Manager - Dell Vostro 200 Owner's Manual

7 Select the desired capacity for the volume, and press <Enter>. The
default value is the maximum available size.
8 Press <Enter> to create the volume.
9 Press <y> to confirm that you want to create the RAID volume.
10 Confirm that the correct volume configuration is displayed on the main
Intel Option ROM screen.
11 Use the up- and down-arrow keys to select Exit, and press <Enter>.
12 Install the operating system.
Deleting a RAID Volume
NOTE:
When you perform this operation, all data on the RAID drives will be lost.
NOTE:
If your computer currently boots to RAID and you delete the RAID volume in
the Intel RAID Option ROM, your computer will become unbootable.
1 Press <Ctrl><i> when you are prompted to enter the Intel RAID Option
ROM utility.
2 Use the up- and down-arrow keys to highlight Delete RAID Volume, and
press <Enter>.
3 Use the up- and down-arrow keys to highlight the RAID volume you want
to delete, and press <Delete>.
4 Press <y> to confirm the deletion of the RAID volume.
5 Press <Esc> to exit the Intel Option ROM utility.
Configuring for RAID Using the Intel
If you already have one hard drive with the operating system installed on it,
and you want to add a second hard drive and reconfigure both drives into a
RAID volume without losing the existing operating system and any data, you
need to use the migrating option (see "Migrating to a RAID 1 Volume" on
page 45 or "Migrating to a RAID 1 Volume" on page 45). Create a RAID 1
Volume only when:
• You are adding two new drives to an existing single-drive computer (and
the operating system is on the single drive), and you want to configure the
two new drives into a RAID volume.
®
Matrix Storage Manager
Setting Up and Using Your Computer
43