Dell Vostro 200 Owner's Manual page 119

NOTICE:
Do not route card cables over or behind the cards. Cables routed over the
cards can prevent the computer cover from closing properly or cause damage to
the equipment.
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 card retention release lever
3 PCI card
11 Replace the computer cover, reconnect the computer and devices to
electrical outlets, and then turn them on.
12 If you installed a sound card:
Enter system setup (see "System Setup" on page 170), go to Onboard
a
Devices and select Integrated Audio, and then change the setting to Off.
Connect external audio devices to the sound card's connectors. Do
b
not connect external audio devices to the microphone,
speaker/headphone, or line-in connectors on the back panel. See "Back
Panel Connectors" on page 18.
2 card retention bracket
4 PCI card slot
Removing and Installing Parts
1
2
3
4
119